travlfi JourneyXTR User manual

JourneyXTR™
Mobile 4G LTE Router & Wi-Fi Extender
QUICK START GUIDE

Getting Started
This is the Quick Start Guide for the TravlFi JourneyXTR Router.
Here you will nd an overview of the various components found on
the JourneyXTR router, basic hardware installation, and rst login
information. It is highly recommended that you acquaint yourself
with the Quick Start Guide before using the device.
Connecting your JourneyXTR
with TravlFi data is easy. Get
started by choosing one of our
Pay As You Go data plans and
activating your device.
View plans at: travl.com/plans
or scan the QR code below.
1. LAN Ethernet Ports
2. WAN Ethernet Port
3. Indicator Lights
- Power Indicator LED
- 2.4 Ghz Wi-Fi
- 5 Ghz Wi-Fi
- LTE/Cellular Network
Status
- Internet/Data Status
- SIM Card Status
- 3 Signal Meter
Levels
4. Reset Button
5. Power Socket
Front View
1
3
1 1 1 2
4 5
1. LTE Antennas
2. Wi-Fi Antennas
Back View
1
2 2 2 2
1

2 External Antennas
- 2 x LTE
4 External Antennas
- 2 x 2.4GHz
- 2 x 5GHz
Device Setup Steps Attach the 6 antennas to the device. Please ensure that the
LTE antennas are placed in the LTE ports, antennas labeled 2.4
GHz are in the 2.4 GHz ports, and the antennas labeled 5 GHz
are in the 5 GHz ports.
Plug the device into a power outlet with the included wall
adapter to turn on the router.
Call 1-800-960-6934 or scan the QR code on the
right to activate your JourneyXTR router with a
TravlFi Pay As You Go data plan of your choice.
After activation, search for either of the 2.4 Ghz or 5 Ghz
Wi-Fi frequencies that match the SSID located on the bottom
of the unit. Use the Wi-Fi Key, also located on the bottom of
the unit, as your password.
After startup, the device may need a few minutes to nd the best cellular signal
available in your area. Once this process is complete, internet/data connection will
automatically function over Wi-Fi and LAN.
Instructions to log into your router to make any changes are located on the bottom
of the unit.
1
2
3
4

LED
POWER
LTE
ON Device power on.
Device power off.
LTE is connected.
Device is transmitting data over LTE.
LTE is not working.
The 2.4GHz/5GHz Wi-Fi is on.
Device is transmitting data over 2.4GHz/5GHz Wi-Fi.
The 2.4GHz/5GHz Wi-Fi is off.
WPS is activated and ready to connect.
WPS is not activated.
LAN port is connected.
Device is transmitting data via the port.
Device is transmitting data via WAN port.
LAN port is not connected.
WAN port is connected.
WAN port is not connected.
OFF
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
ON
Flash
Flash
Flash
Flash
Flash
2.4GHz/5GHz
Wi-Fi
WPS
LAN 1-4
WAN
STATE FUNCTION
Light Indicator Guide
More Resources
For important information and to view our downloadable PDFs,
visit travl.com/xtr-info or scan the QR code below.
Including our Full User Manual and Wi-Fi Repeating Instructions.
Device is not connecting over LTE.
LTE signal strength is low.
LTE signal strength is medium.
LET signal strength is high.
Virtual SIM mode is on.
Physical SIM mode is on.
OFF
ON
All OFF
1 LED
2 LED
3 LED
VS Indicator
LTE Singal
Strength
Light Indicator Guide Light Indicator Guide Continued

For more information on TravlFi call: 1-800-960-6934