TRENDnet TE100-MFP1 User manual

TRENDnet User’s Guide Cover Page

© Copyright 2011 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide Table of Contents
i
Contents
Product Overview ...........................................................................1
Package Contents .......................................................................................................... 1
Features ......................................................................................................................... 1
Product Hardware Features........................................................................................... 2
Application Diagram ...................................................................................................... 3
Network Installation .......................................................................4
Hardware Installation .................................................................................................... 4
Utility Installation ...........................................................................4
Windows Installation ..................................................................................................... 4
MAC OS X Installation .................................................................................................... 5
Using the Utility ..............................................................................6
Launching the Utility...................................................................................................... 6
Utility Main Window...................................................................................................... 6
Configure Server ............................................................................................................ 7
Connect.......................................................................................................................... 8
Disconnect ..................................................................................................................... 8
Sending a Request to Connect....................................................................................... 9
Connect to a Printer..................................................................................................... 10
Auto-Connect Printer................................................................................................... 10
Connect to a Scanner................................................................................................... 11
Advance Configuration..................................................................12
Access the management page ..................................................................................... 12
Change device IP address ............................................................................................ 12
Change Device Information ......................................................................................... 13
UPnP ............................................................................................................................ 13
Change Language......................................................................................................... 13
Change Admin Account Setting ................................................................................... 13
Change User Account Setting ...................................................................................... 14
Maintenance ................................................................................ 14
Restart device .............................................................................................................. 14
Reset device................................................................................................................. 15
Upgrade Firmware....................................................................................................... 15
Device Status ................................................................................ 15
System Status .............................................................................................................. 15
Network Status ............................................................................................................ 16
Management Page Structure......................................................... 17
Technical Specifications ................................................................ 18
Troubleshooting ........................................................................... 19
Appendix ...................................................................................... 20

© Copyright 2011 TRENDnet. All Rights Reserved.
1
TRENDnet User’s Guide TE100-MFP1
Product Overview
Package Contents
In addition to the print server, the package includes:
•Muti-Language Quick Installation Guide
•CD-ROM (User’s Guide & Utility)
•Network cable (1.5m / 5ft)
•Power adapter (5V DC, 2A)
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor that the item was purchased.
Features
TRENDnet’s 1-Port Wireless N Multi-Function USB Print Server, model TEW-MFP1,
transforms most stand-alone multi-function and standard USB printers into a shared
network resource. Install your multifunction printer in the most ergonomic location and
then connect the compact TEW-MFP1 to a high speed Wireless N network.
An intuitive utility supports Windows and Mac operating systems and provides a
seamless user experience. Scan, fax, and print functionality from any networked
workstation. Integrated Wireless N provides greater installation flexibility. An Ethernet
port facilitates optional wired networking. Wi-Fi Protected Setup (WPS) streamlines the
process of connecting to a wireless network. This compact device fits into the smallest
spaces.
•1 x 10/100Mbps Auto-MDIX Fast Ethernet port
•1 x USB 2.0 high speed port
•Backwards Compatible with USB 1.1 Devices
•Control Center utility supports Windows 7 (32/64-bit) / Vista (32/64-bit) / Windows
XP(32/64-bit) and Mac OS X 10.4/10.5/10.6/10.7 operating systems
•Supports most All-In-One multi-function printers and regular USB printers
•Share multi-function printers and regular USB printers over the network
•Supports LPR/LPD printing protocols
•Control Center utility includes built in scan feature*
•Supports NetUSB technology*
•Share USB peripheral devices over the network including; digital cameras, web
cams, speakers, iPods™, flash drives, external hard drives, printers, and memory
card readers*
•Universal Plug & Play (UPnP) installation
•Diagnostic LEDs

© Copyright 2011 TRENDnet. All Rights Reserved.
2
TRENDnet User’s Guide TE100-MFP1
Product Hardware Features
Front View
•Power -This LED indicator is solid green when your router is powered on.
Otherwise if this LED indicator is off, there is no power to your router.
•LINK – This LED indicator is blinking green when the network port is connected
and functioning properly on your router.
•ACT –This LED indicators will be blinking green while data is transmitted or
received through your router LAN port.
•USB – This LED indicator will be blinking green while data is transmitted or
received through the USB port.
Side View (Right)
•USB Port – The USB 2.0 port allows you to connect USB printers and storage
devices to your network and share access to these devices to computers on
your network through the use of the included USB software utility.
•LAN Port - Connect Ethernet cables (also called network cables) to your router
or network LAN ports.

© Copyright 2011 TRENDnet. All Rights Reserved.
3
TRENDnet User’s Guide TE100-MFP1
Side View (Left)
•Power Port – Connect the included power adapter from your router power
port and to an available power outlet.
Note: Use only the adapter that came with your router.
•On/Off Power Switch – Move the On/Off switch to power “On” (Left position)
or “Off” (Outer position) the device.
•Reset Button –Push and hold this button for 15 seconds and release to reset
the device to its factory default setting.
Application Diagram
The print server allows you to share your regular printer or multi-function printer
through a network. It is typically placed in the same location of your printer or multi-
function printer. In addition to its print server functionality the TE100-MFP1 can also
allow you to share USB storage devices over the network.

© Copyright 2011 TRENDnet. All Rights Reserved.
4
TRENDnet User’s Guide TE100-MFP1
Network Installation
•Verify that any software that is required to operate your printer or multi-function
printer is installed before installing the TE100-MFP1.
•By default the TE100-MFP1 is set to DHCP, it will automatically obtain an IP address
from your network.
Hardware Installation
1. Plug the TE100-MFP1 to one of the LAN ports of your router
2. Plug in the power adapter and connect the print server. Move the power switch to
the “On” position.
3. Verify the status LED indicators on the front of the printer server are fully functional
(Power is solid green and LAN port is solid green).
4. Install TRENDnet USB Control Center utility to configure the print server.
Utility Installation
TRENDnet USB Control Center utility is required to be installed on each computer that
requires access to the print server or to the devices connected to it. Please refer to the
Technical Specification section for a list of supported operating systems.
Windows Installation
1. Insert the Utility CD-ROM into your computer's CD-ROM Drive.
2. Click Install Utility
3. Follow the InstallShield Wizard instructions. Then click Finish.

© Copyright 2011 TRENDnet. All Rights Reserved.
5
TRENDnet User’s Guide TE100-MFP1
4. Double click on the TRENDnet USB Control Center Utility icon.
5. The utility will automatically find the TE100-MFP1 and the USB device you have
connected.
MAC OS X Installation
1. For each computer that requires access to the print server, insert the Utility CD-ROM
into your computer's CD-ROM Drive.
2. Open the CD contents and locate the “TRENDnet USB Control Center Utility Installer”
(.dmg) file. Double-click the file.
3. Double-click the file in the window.
4. You will be prompted to install the utility. Click Install to start the installation.
5. You will be prompted for your password to allow the installation. Enter your
password and click OK.

© Copyright 2011 TRENDnet. All Rights Reserved.
6
TRENDnet User’s Guide TE100-MFP1
6. Once the installation is completed. Click Restart to restart your computer.
7. Run the TRENDnet USB Control Center Utility. The utility will automatically find the
TEW-MFP1 when it is connected to your network
Using the Utility
The TRENDnet USB Control Center utility is used to communicate with the TE100-MFP1
and any USB device that is connected to the unit. Below describes in detail how to
operate the utility for both Windows and Macintosh operating systems.
Launching the Utility
Windows OS
Upon completing the software installation, a desktop shortcut is automatically created.
You double click the icon to start the utility or open the utility if it is already running.
If the utility is already running and you attempt to close the window, it will continue to
run in the background and you will find the icon in your notification area if the utility is
still running. To close and exit the utility and exit the application, you can right-click the
notification icon and select Exit or click System > Exit in the utility main window,
however, it is recommended to keep this utility running in the background.
MAC OS X
Upon completing the software installation, a desktop shortcut is automatically created.
Double-click the icon to start the utility. Closing the utility will exit the application.
Utility Main Window
In the utility window, you will see the model name and IP address of your print server
listed. When USB devices are connected, they will be listed under the model name and
IP address of the print server.
Windows OS

© Copyright 2011 TRENDnet. All Rights Reserved.
7
TRENDnet User’s Guide TE100-MFP1
MAC OS X Utility
Menu Items (Windows Only)
•System - Clicking Exit will close the utility and exit the application.
•Tools
oConfiguration – Checking the option Automatically execute when logging on
Windows will automatically start the utility when you log on. Unchecking the
option will disable the utility from automatically starting when logging on.
oAuto-Connect Printer List – Provides a list of printers installed on your
computer. Select the printer you would like to assign to the Auto-Connect
printer list. If you would like to delete printers from this listing, select the
printer in the list and click Delete. Click Close to close the window.
•About
oAbout – Displays the software/driver version and support contact information.
Configure Server
Select the print server you would like to configure in the utility window.
Windows OS
MAC OS X

© Copyright 2011 TRENDnet. All Rights Reserved.
8
TRENDnet User’s Guide TE100-MFP1
Clicking the Configure Server button will open the print server’s management page in
your web browser. Please refer to see “Access the management page” on page 11 for
additional information on advance settings.
Windows OS MAC OS X
Connect
To connect your computer to a USB device, select the USB device in the list, then click
the Connect button to connect your computer to the USB device.
Note: The utility will only allow one computer to connect to one USB device at any given
time, therefore, a computer must disconnect from the USB device first before another
computer can connect to it.
Windows OS MAC OS X
To verify if you are connected to the USB device, a message will appear next to the USB
device displaying a message that the USB device is “Manually connected by <your
computer name>”.
Windows OS
MAC OS X
Disconnect
To disconnect your computer from a USB device, select the USB device in the list, then
click the Disconnect button to disconnect your computer to the USB storage device or
printer.
Note: The utility will only allow one computer to connect to one USB device at any given
time, therefore, a computer must disconnect from the USB device first before another
computer can connect to it.
Windows OS MAC OS X
To verify if you disconnected from the USB device, the status message next to the
message will not show any status message.
Windows OS
MAC OS X
If another computer is currently connected to the USB device you are trying to connect
your computer to, you will not be able to connect to it. To verify if another computer is
connected to the device, a message will appear next to the USB device displaying a
message that the USB device is “Manually connected by <another computer name>”.
Windows OS
MAC OS X
If a USB device is currently being used by another computer, click the Request to
Connect button to send a request to the computer that is currently connected to the
USB device. The computer that is currently connected to USB device will be prompted to
“Accept” or “Reject” the your connection request.

© Copyright 2011 TRENDnet. All Rights Reserved.
9
TRENDnet User’s Guide TE100-MFP1
Windows OS MAC OS X
Sending a Request to Connect
You can send a request to connect to the computer that is currently connected to the
USB device you would like to establish connection too.
Windows OS
To send t a request to connect to a USB device, click the Request to Connect button.
The remote computer will receive the request message below.
•Accept – Clicking this option will disconnect your computer from the device
and allow the requesting computer to connect to the USB device.
•Reject – Clicking this option will disregard the request and your computer will
not be able to connect to the USB
MAC OS X
To send t a request to connect to a USB device, click the Request to Connect button.
The local computer sending the request will show the status message below.
The remote computer will receive the request message below.
•Accept – Clicking this option will disconnect your computer from the device
and allow the requesting computer to connect to the device.
If the remote computer accepts the request, the local computer will display the message
below. Click Close to close the message.

© Copyright 2011 TRENDnet. All Rights Reserved.
10
TRENDnet User’s Guide TE100-MFP1
•Reject – Clicking this option will disregard the request.
If the remote computer rejects the request, the local computer will display the message
below. Click OK to close the message.
Connect to a Printer
Note: This function applies to stand-alone USB printers or USB multi-function printers. It
is required that the printer drivers are installed before your computer is able to print.
Please ensure the printer drivers are installed. If the printer drivers are not installed,
please refer to your printer manufacturer website or documentation on where to
download and how to install the printer drivers. Before installing the printer drivers,
connect your computer to the printer using the USB utility first. Some printers may
require that the printer is directly connected to the computer in order to complete the
driver installation.
Once the printer drivers are installed properly on your computer,
1. Select the printer listed in the utility.
2. Click Connect to connect your computer to the printer.
3. Once your computer is connected, you can send print jobs to the printer.
4. After you have finished printing, click Disconnect, to make the printer available to
other computers on your network that use the printer, or, you can use the Auto-
Connect Printer Feature.
Auto-Connect Printer
When a USB printer is connected and selected in the main window, clicking this option
allows you to enable/disable the auto connect feature to a selected printer in the Auto-
Connect printer list. When your computer attempts to print, the Auto-Connect feature
will automatically connect your computer to the set Auto-Connect printer assigned in
the utility. Once the print job from your computer is completed, it will automatically
disconnect to make the printer available to other computers on your network.
Note: It is recommended to enable this feature on all computers that will need to
connect to the USB printer. Enabling the Auto-Connect Printer feature will avoid the
complexity of having to manually connect and disconnect from the printer for each
computer when multiple computers are sending print jobs to the USB printer.
1. Click Auto-Connect Printer.

© Copyright 2011 TRENDnet. All Rights Reserved.
11
TRENDnet User’s Guide TE100-MFP1
2. Select the assigned printer to use as the auto connect printer by checking the box.
3. When you are finished, click Apply.
Connect to a Scanner
Note: This function applies to stand-alone USB scanners or USB scanners included with
multi-function printers. It is required that the scanner drivers are installed before your
computer is able to scan. Please ensure the scanner drivers are installed. If the scanner
drivers are not installed, please refer to your printer manufacturer website or
documentation on where to download and how to install the scanner drivers. Before
installing the scanner drivers, connect your computer to the printer using the USB utility
first. Some scanners may require that the scanner is directly connected to the computer
in order to complete the driver installation.
1. Select the scanner or multi-function printer with scanning capability listed in the
utility.
2. Click Connect to connect your computer to the scanner.
3. Once your computer is connected, you can receive scanned files from the scanner.
4. After you have finished printing, click Disconnect, to make the scanner available to
other computers on your network that use the scanner.

© Copyright 2011 TRENDnet. All Rights Reserved.
12
TRENDnet User’s Guide TE100-MFP1
Advance Configuration
Access the management page
Note:
•The management page is accessed through the use of your Internet web browser
(e.g. Internet Explorer, Firefox, Chrome, Safari, Opera) and will be referenced
frequently in this User’s Guide.
•When the TE100-MFP1 is set to DHCP, the easiest way to access the management
page is through the USB Control Center Utility. Follow the below steps to proceed.
1. Double click on the USB Control Center Utility icon.
2. The utility will automatically find the TE100-MFP1.
3. Select the TE100-MFP1 and press Configure Server.
4. The user interface of the TE100-MFP1 will open. Click on Config.
5. Enter the User Name and Password and then click Login. By default:
Administrator (User Name): admin
Password: admin
Note:User name and Password are case sensitive
Change device IP address
General
By default the device is set to Automatic/DHCP. This setting allows the device to
automatically obtain an IP address from your network. However you can statically assign
an IP address to the device.
Note: The IP address must be in the same subnet as your network. Incorrect settings
may cause issues.
1. Log into the management page (see “Access the management page” on page 11).
2. Click on General tab and scroll down to the TCP/IP section.

© Copyright 2011 TRENDnet. All Rights Reserved.
13
TRENDnet User’s Guide TE100-MFP1
3. Select Static IP
4. Enter the IP address and Subnet Mask settings.
5. Click Apply to save settings.
Change Device Information
General
In most cases, you do not need to change the device information and the default
settings are just fine. However you can customize these settings to match your network.
These settings help you determine or find the device from features like Windows
Network Map or a router’s client list.
•Server Name: The device name described on your network
•Workgroup: The work group assigned to the device
•Description: The product descript of the device
1. Log into the management page (see “Access the management page” on page 11).
2. Click on General tab and scroll down to the Device Information section.
3. Enter the updated device information
4. Click Apply.
UPnP
General
Universal Plug and Play (UPnP) is a networking protocol that makes your networking
devices discoverable in the network. By default the UPnP setting is set to enable. The
device can be discovered under your computer’s network map
1. Log into the management page (see “Access the management page” on page 11).
2. Click on General tab and scroll down to the UPnP section
3. Select Enable or Disable option
4. Click Apply to save settings.
Change Language
General
The device supports multiple languages of the management page. Currently the
languages offered are; Western European (English), Central European, Traditional
Chinese, Simplified Chinese, Japanese, Korean, Cyrillic, Greek, Arabic, and Thai. You can
change the displayed language with the below steps.
1. Log into the management see “Access the management page” on page 11).
2. Click on General tab and scroll down to the Language section
3. Select your desired language on the pull down menu.
4. Click Apply to save settings.
Change Admin Account Setting
Administrator
By default username and login password of the device is admin for both username and
password. It is recommended to change the default password for added security. You
can change both login username and password of the device management page by
following the steps below.
Note: Changes to these settings are case sensitive and should be written down
somewhere and stored.
1. Log into the management page see “Access the management page” on page 11).
2. Click on Administrator tab and scroll down to the Set Administrator section

© Copyright 2011 TRENDnet. All Rights Reserved.
14
TRENDnet User’s Guide TE100-MFP1
3. Under Administrator section enter your new username information.
4. Under New Password and Re-Type Password section, enter your new password
information.
5. Click Apply to save settings.
Change User Account Setting
Administrator
A user account does not have the ability to make changes to the device settings. You can
assign a user account’s password information by following the steps below. You can add
a user account and assign both username and password for each user accounts by
following the steps below.
Note: Changes to these settings are case sensitive and should be written down
somewhere and stored.
1. Log into the management page see “Access the management page” on page 11).
2. Click on Administrator tab and scroll down to the Set Administrator Set
Administrator section
3. Under User Name section enter the new login username you would you would like
to assign to the user account.
4. Under the password section enter the new login password you would you would
like to assign to the user account.
5. Under Permission section select the type of access you would like to permit user
accounts with; Read Only or Read-Write.
6. Click Add to create the new user account information.
7. To delete a user account, select the user account you would like to delete.
8. Click the Delete button to permanently remove selected user account.
Maintenance
Restart device
Maintenance
A device restart is similar to power cycling the unit using but using the management
screen. A device restart can be a useful tool when troubleshooting your network. The
steps below shows you how to perform a device restart.
1. Log into the management see “Access the management page” on page 11).
2. Click on Maintenance tab
3. Click the Restart button
4. Click Yes to confirm the device restart
5. The home page will automatically appear once the device has completed restarting.

© Copyright 2011 TRENDnet. All Rights Reserved.
15
TRENDnet User’s Guide TE100-MFP1
Reset device
Maintenance
A device reset will set the device back to factory default settings. This can be a useful
tool when troubleshooting your network. There are two ways on how to reset the
device. You can simply press and hold for 10 second the reset button located on the side
of the unit. The other way is to follow the steps below.
1. Log into the management page see “Access the management page” on page 11).
2. Click on Maintenance tab
3. Click the Reset to Factory Default button
4. Click Yes to confirm the reset
Upgrade Firmware
Maintenance
Firmware upgrades enhance the device from the current firmware version or add new
features. Follow the steps below on how to perform a firmware upgrade. It is
recommended that you reset the device back to factory default settings once the
firmware upgrade process is completed.
1. Log into the management page see “Access the management page” on page 11).
2. Click on Maintenance tab
3. Click the Download New Firmware button, this will automatically open a web
browser to TRENDnet.com
4. Go to the product webpage and in the download section of the product webpage
you will find available update firmware.
5. Download and save .zip firmware file to our computer
6. Unzip the downloaded file into your computer
7. Return back to the device management screen and click the Upgrade Firmware
button
8. Click Browse and select the firmware file from the unzipped folder
9. Click the Upload button to upgrade the device firmware
Device Status
System Status
Status
The system status page provides device information of your unit. This information can
be used when troubleshooting your network.
•Firmware Version: Device firmware version
•Model: Device model name
•MAC Address: MAC address of the device
1. Log into the management page see “Access the management page” on page 11).
2. Click on Status

© Copyright 2011 TRENDnet. All Rights Reserved.
16
TRENDnet User’s Guide TE100-MFP1
3. Select System Status tab
Network Status
Status
The network status page provides network information of your unit. This information
can be used when troubleshooting your network.
•Name: Device name
•Access Mode: Device mode set
•IP Address: Current IP address assigned to the device
•Subnet Mask: Current subnet mask assigned to the device
•DHCP Server: DHCP Server address of the device
•Lease Time: IP address lease time
1. Log into the management page see “Access the management page” on page 11).
2. Click on Status
3. Select Network Status tab

© Copyright 2011 TRENDnet. All Rights Reserved.
17
TRENDnet User’s Guide TE100-MFP1
Management Page Structure
General
•Device Information
oServer Name
oWorkgroup
oDescription
•Access Mode
oServer Mode
oNetUSB mode
•TCP/IP
oAutomatic/DHCP
oStatic IP
•UPnP
•Language
Administrator
•Set Administrator
oAdministrator user name
oAdministrator Password
•User Account List
oUser account username
oUser account password
oUser account Permission
Maintenance
•Restart
•Reset to Factory Default
•Download new Firmware
•Upgrade Firmware
Status
•System Status
oFirmware Version
oModel Name
oMAC Address
•Network Status
oName
oAccess Mode
oIP Address
oSubnet Mask
oDHCP Server
oLease Time
•Wireless Status
oName
oSSID
oBSSID
oChannel No
oNetwork Type
oLink Quality
oSignal Strength
oSecurity

© Copyright 2011 TRENDnet. All Rights Reserved.
18
TRENDnet User’s Guide TE100-MFP1
Technical Specifications
*Requires included software utility.
Dimensions (LxWxH) 75 x 58 x 24 mm (3 x 2.3 x 1 in.)
Weight 62 g ( 2.2 oz.)
Temperature Storage: -10 ~ 60°C (13.9~139 °F)
Operating: 5 ~ 40°C (41~104 °F)
Humidity Max. 90% (non-condensing)
Certifications CE, FCC
Hardware
Standards
IEEE 802.11b, IEEE 802.11g, Based on IEEE
802.11n technology, IEEE 802.3 (10Base-T),
IEEE 802.3u (100Base-TX), USB 1.1/2.0
LAN Port 1 x 10/100Mbps Auto-MDIX Ethernet port
USB Ports 1 x USB 2.0 Type-A
LED Indicators Power, WLAN, LAN, USB
TCP/IP Protocol Supported DHCP
Control Center Utility
Supported OS
Windows: 7(32/64-bit) / Vista (32/64-bit) /
XP(32/64-bit)
Mac OS X: 10.4/ 10.5/10.6/10.7
USB Devices Supported 127 Max.
Button
Init button: restores factory default settings
(press over 10 seconds), Activates WPS
Function (press for 2~9 seconds)
Power Input: 120~ 240V
Output: 12V DC, 1.5A
Power Consumption 2.04 Watts (max.)