tri-art audio B Series User manual
Product #7216
*Read the user manual
before operating.
User Manual passive
pre-amp
B-Series
safety
information
Before you start...
Warning of a hazard for the user, the unit or possible misuse. Important notice.
Thank you for buying a Tri-Art Audio product. Please read through this manual to
understand and operate this product correctly. Please keep this manual in a safe place so
that you may refer to it whenever necessary. Please ensure the product you are using is
rated for your country’s electrical system, or it will not be covered under our warranty.
Warning:
To prevent re or shock hazard, do not expose this product to rain or moisture.
Important Notice:
The serial number for this equipment is located on the bottom of this component. Please
write this serial number on the enclosed warranty card and follow the instructions to register
your product for our three (3) year limited warranty.
This equipment is designed for consumer use, such as home audio systems. It is not
designed to operate in a business environment or a mobile application. Mobile, pro or
commercial businesses such as restaurants will not be covered under warranty.
Caution:
To reduce the risk of electric shock, or damage do not remove drivers. No user serviceable
parts inside. Refer servicing to qualied service personnel.
safety
information
Safety Instructions
Read Instructions:
All the safety and operating instructions should be read before operating this equipment.
Retain Instructions:
The safety and operating instructions should be retained for future reference.
Heed All Warnings:
All warnings, set up procedures, and operating instructions should be strictly adhered to.
Follow all instructions carefully.
Water and Moisture:
Under no circumstances should this audio component be used near water.
It is not to be used in a bathroom, water closet, shower, kitchen, wet basement,
pool/spa/sauna area, or outside.
safety
information
Safety Instructions
Heat:
This product should be located well away from all the heat sources such as but not limited to
heaters, forced air heat, radiators, stoves, and replaces.
Cleaning:
Your Tri-Art product was soaked and nished in hemp oil. Do not use lacquers or aerosol wax
products with this product. Do not pour water on the surface at any time.
Heavy Objects:
Do not place heavy objects on this component.
pre amp front
1
2
3
4
1 2 3
4
Source Selector
Input/Mute Switch (see Use & Guidelines)
Volume Control
Headphone Jack
pre amp back
1
2
3
4
5
2
3
4
5
1
1 – 5 Left (Top) / Right (Bottom) RCA Inputs
XLR (Balanced) Input
2 Singled Ended Outputs
XLR (Balanced) Output
Power Supply Input
pre amp specs
Crafted with bamboo and natural sheep’s wool.
Learn more at triartaudio.com
Power: 12 Volt DC 5 Amps, Linear Tube Buffered
Tube: One (1) NOS GE 5670
Gain: Three Position Gain Selector Switch for Tube Output
Shield: Copper Sleeve Tube Shield
Pre-Amp: Pre-Amp Section Shunt Resistor Design
Shielding: Shielded to Protect Against External Magnetic Fields
and Prevent Contamination Due to Ultrasonic and RF Interference
Headphone: 6.3mm (1/4") Jack with Built in Headphone Amplier
Input: Six Inputs, Five Stereo RCA Inputs, One Stereo Balanced XLR
Balance: 2 Passive Isolating Transformers for Balanced Signal
Input through RCA
Output: 2 Stereo RCA, One Stereo Balanced XLR
Cabinet: Bamboo with 1/8" Anodized Aluminium Face Plate
Dimensions: 304.8mm x 229mm x 178mm / 12″ x 9″ x 7″
Remote: Bamboo Encased Remote Control Included
use &
guidelines
Input/Mute Switch
The Input/Mute Switch located has three positions.
Left Position:
Output to speaker is unmuted. Input is selected RCA source using source selector.
Middle Position:
Output to speaker is muted, headphone jack is unmuted. (Use for headphone listening)
Right Position:
Output to speaker is unmuted. Input is XLR (balanced) connection.
included
in the box
• B-Series Passive Pre Amp
• Remote Control
• 12 Volt External Power Supply
• Iso Feet
• Barrel to Barrel Plug
congratulations!
Your Tri-Art Audio pre-amplier is
operational and fully set up.
Now, go play your favourite record!
Our Bamboo Design
We have selected bamboo to construct many of the structural parts of our
systems rather than metal or plastic. In addition to being aesthetically pleasing, it
has a vital function.
The sonic virtues of bamboo are evident. We use the latest CNC machinery to
manufacture to precise tolerances. Due to the nature of the material, there may
be slight variations that do not comprise the sound. Every component is hand
nished and then inspected by the designer before it leaves the factory.
Crafted with bamboo and natural sheep’s wool.
Learn more at triartaudio.com
warranty
information
For Your Protection:
Completely and immediately mail the product registration card so that we may contact you
directly in the event a safety notication is issued in accordance with the 1972 Consumer
Safety Act, or for other reasons Tri-Art Audio may deem necessary.
Technical Support Hotline
1-877-541-0299
Our technical department will gladly answer any questions you may have about our
products. Monday through Thursday, 9am to 5pm and Friday, 9am to 3pm EST.
Manufacturer’s Limited Three
Year Warranty:
Tri-Art Audio warrants this unit to be free from defective material or workmanship and will
repair or replace this unit or any part thereof if it proves defective in normal use or service
within three (3) years from the date of original purchase.
This warranty will be considered void if the unit has been tampered with, improperly
serviced, subjected to abuse or misuse or if installed in a commercial vehicle. This warranty
does not cover accidental damage.
For all warranty information please see Tri-Art Audio’s warranty
information card included with your new equipment.
thank you for
your purchase!
triartaudio.com
Designed. Fabricated. Assembled
In Canada
Other manuals for B Series
3
Table of contents
