Triplett HDCM3 User manual

User Manual
Model HDCM3
8” HD IPS LED Monitor
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

Introduction
Congratulations on your purchase of the Triplett HDCM3 HD IPS (In-Plane Switching)
LED Monitor. The Triplett HDCM3 8” HD IPS LED Monitor is a multi-purpose
ruggedized HD LED monitor. It can be used for temporary or permanent connection to
any NVR, DVR, Cable/Satellite box, computer, or other video source that has an HDMI,
AV, VGA, or BNC connection. Use with Security Cameras during setup, testing, and
monitoring; DVRs, Cable/Satellite TV boxes, and DVD Players; Computers and Laptops
as a second monitor; DSLR Cameras as a second screen while broadcasting live events;
Raspberry PI Projects, and much more. Versatile stand allows placement on top of
desk or DVR/NVR, mounting to wall, or mounting to IT cabinet or server rack. Includes
stand, AC Adapter, HDMI cable.
Features
8 inch Full HD resolution (1280x720) IPS LED screen

178° wide viewing angles, 1000:1 contrast,16:9 Aspect Ratio,350-450cd/m² high
brightness, which offers outstanding viewing experience.
Supports HDMI, AV,BNC, and VGA inputs , high sensitivity, strong anti-jamming.
Built-in Rechargeable Battery plus AC Adapter
Includes Monitor, VGA Cable, HDMI cable, AC Adapter/Charger, Stand

www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

Specifications
Model
HDCM3
Display Screen
8” IPS LED
Aspect Ratio
16:9
Native Resolution
1280 x 720
Contrast
1000:1
Brightness
450cd/m2
Response Time
< = 12ms
Viewing Angle
Wide 178 ° (78 x78)
Frequency
60-75 Hz
Signal Input
AV / BNC / VGA / HDMI
Backlight
LED
Analog Interface
PAL/NTSC
HDMI Format (Full
HD-HD)
1080p, 1080i,720p, 576p,576i, 480p, 486i
Speaker
Built-in
Operating
Temperature
-10 degrees Celsius to 60 degrees Celsius
Language
English, Spanish, Russian, Portuguese, Dutch,
German, French, Italian, Chinese
Battery
Lithium Polymer (3 cell) 11.1V 1000mAH
Charger
12.6V DC 2A
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

Screen Cleaning & General Care
Do not use solvents when cleaning the screen as they may cause damage; clean with a
soft cloth. Do not expose the Monitor to wet/damp/humid, dusty, or excessively hot or
cold environments or leave it in direct sunlight. Make sure all connections are free of dirt
and debris at all times. Do not block vents. Only use the supplied power supply. Turn
power off when not in use.
NOTE: The HDMC3 will not work directly connected to HD Analog Cameras or
anything that uses proprietary encoding.
Quick Start K START GUI
How to display video
Plug the AC adapter into a wall outlet, and then connect it to the HDMC3. The HDMC3
will automatically turn the screen on and attempt to show video. Next, connect your
video source to the appropriate connection on the top of the HDMC3. If you see a “No
Signal” message on the screen, press the Input Selector button on the top to access that
menu, then press it again to scroll through the AV, BNC, HDMI, and VGA options. Once
you have highlighted the connection type you are using, press one of the Arrow buttons
to select it. Your video should now display.
Adjusting brightness, contrast, etc.
Press the Screen Controls Menu button to access the menu. There will be four primary
icons on the top row—a Color Wheel icon, a Speaker icon, a Screen Shift icon, and an
Advanced Settings icon (the one with the clock). Use the Left and Right Arrow buttons to
highlight/ select one of the menus. Then use the Input Selector button to scroll down the
list of Settings. When you have highlighted the setting you want to adjust, use the Arrow
buttons to make the change. Once you have made the change, select the Screen Controls
button again to save it.
IMPORTANT NOTE ABOUT POWER & CHARGING THE BATTERY
There is a built-in rechargeable battery. Therefore, leaving the Battery Engage/Disengage
Switch in the ON position will drain the battery even when the screen is not ON. Be sure
to turn off the Battery Engage/Disengage Switch during transport or when the HDMC3 is
not in use. Always use the AC power adapter if you set up the HDMC3 in a permanent
location, or plan to run it continuously for more than an hour.
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

NOTE: To charge the battery, plug in the AC adapter and turn the Battery
Engage/Disengage Switch to the ON position.
User Interface
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

Monitor Stand Installation
TOOLS
You will need a long, narrow flat-head screwdriver that has a magnetic tip. You will also
need to be in a well-lit area.
Step 1: Unboxing & Parts**
The stand ships in two separate pieces—the Base and the Tilt Adjuster—and must be
assem-bled before use. Remove both parts from your case. The Base is the piece with a
bottom that is shaped like a boomreang. The Tilt Adjuster is the piece that has the
rectangular piece of metal mounted on a black plastic circle with a piece of rubber in
between.
Step 2: Removing the Screws and Mounting the Tilt Adjuster to the Base
Remove the screws from the Tilt Adjuster using the flat-head screwdriver. Then, flip the
Base over and place the neck of the Base into the Tilt Adjuster. Line up the screw holes,
then use the screws to connect the two pieces.
Step 3: Mounting the Screen Onto the Stand
Place the Base upright on the table with the feet of the stand facing you. Verify there is
no slack between the Base and the Tilt Adjuster (the connection should be tight; the Tilt
Adjuster may move left and right slightly, but should not have any ability to move up or
down.) Take the HDCM Monitor and look at the back of it. Below the label on the back
of the unit, you will see a slot cut out of the metal case. Place the rectangular piece of
metal on the TIlt Adjuster into that slot.
Step 4: Tighten Tilt Adjuster Against the Monitor
Now that the Monitor is mounted onto the Tilt Adjuster, use the wheel on the Tilt
Adjuster to tighten the connection to the Monitor until the connection is tight enough
that the monitor will not fall out if the stand is picked up and flipped upside down (be
sure to be careful when you are testing this in case you haven’t tightened it down
enough).
Step 5: Tilt Adjustments
To complete the adjustments, loosen the Tilt Up/Down bolt, manually move the Monitor
to the desired viewing angle, and then re-tighten the Tilt Up/Down bolt.
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

Warranty Information
Triplett / Jewell Instruments extends the following warranty to the original
purchaser of these goods for use. Triplett warrants to the original purchaser for
use that the products sold by it will be free from defects in workmanship and
material for a period of (1) one year from the date of purchase. This warranty
does not apply to any of our products which have been repaired or altered by
unauthorized persons in any way or purchased from unauthorized distributors so
as, in our sole judgment, to injure their stability or reliability, or which have been
subject to misuse, abuse, misapplication, negligence, accident or which have
had the serial numbers altered, defaced, or removed. Accessories, including
batteries are not covered by this warranty
Copyright ©2019 Triplett
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]