Trotec Cardboard Tree User manual

www.troteclaser.com
Assembly Instruction
Cardboard Tree
Design by CNCKing.com

www.troteclaser.com
Cardboard Tree
Design by CNCKing.com 2

www.troteclaser.com
Cardboard Tree
Design by CNCKing.com 3

www.troteclaser.com
Cardboard Tree
Design by CNCKing.com 4
1 Step-by-step assembly instruction
Check inventory
Once you have all the pieces in front of you, the process of
putting them together is no different from assembling pieces
of Lego. First, double-check your inventory. Take your time
and enjoy the building process!
Build the foundation
Start by laying down part A followed by all eight part Bs
(roots).
Complete the foundation
Cap the top of the foundation with all part Cs.
D
D
D D
E
F
G
C
B
A
H
I

www.troteclaser.com
Cardboard Tree
Design by CNCKing.com 5
Add sides
Slide into place all four tree sides (part Ds) using at first the
three disks (E, F and G) then slotting
the tree into the foundation you built in the previous step.
Build and set the star
Glue the three parts of the star together using a part "I"
in between two part Hs. This is the only point when you really
need some glue. The rest of the parts fit together without glue
or any other kind of fixture.
Perform some finishing touches
There is no need to apply any preservatives or paint; feel free
to add some decoration. You can add some Christmas bau-
bles by inserting a cord or twine around the tree giving you
some extra space for decoration. ENJOY!