Trim a Home TY-S6-250L User manual

Made in / Hecho en CHINA. Distributed by Kmart Corporation
Hoffman Estates, IL 60179 SHOP kmart.com
For questions or comments about the product:
Email: [email protected] or Call toll-free: 1-855-428-6664
OWNER’S MANUAL
6' 250L SPIRAL TREE
Product code: 0-03431418-7 (clear), 0-33431419-5 (multi)
UPC code: 029944488996 (clear), 029944489009 (multi)
Date of purchase: _____/ _____/ _____

6 FT SPIRAL TREE
ITEM NUMBER:TY-S6-250L
A. Star tree topper
Qty：1pc
B.SpiralTree
Qty：1pc
C.PoleSections
Qty：3pcs
D. Tree Stand Center Cone
Qty：1pc
E. Tree Stand Legs
Qty：4pcs
F. Driving Cap
Qty：1pc
G. Ground Stakes
Qty：4pcs
H. Stake Section
Qty：1pc
I. Center Cone
Qty：1pc
NOTE:“ Plastic stand included MUST only be used for indoor use, and
not used in conjunction with ground stake.”
ASSEMBLY INSTRUCTIONS
FOR INDOOR USE:
STEPS: (1) Slide the four legs into the matching slots on the sides of the Tree Stand Center
Cone to create the Tree Stand (See FIG.1). (2) Insert a Pole Section, with the big end down, into
the Tree Stand. (3) Insert the remaining two Pole Sections. (See FIG. 2). (4) Insert the end of
final pole section through the top of the tree and fit the end inside the bottom of the center
cone.(See FIG.3) (5) Place the Star into the top of the Center Cone.(See FIG.3)
(6) Secure the Spiral Tree to the Tree Stand by attaching the four strings to each leg.(See FIG.4)
(7) Plug in.
FOR OUTDOOR USE:
STEPS: (1) Attach the Driving Cap to the top of the Stake Section. (2) Push or drive the Stake
Section into the ground firmly. Remove the Driving Cap and save for future use; (3) See and
make the same Steps 2-5 from Indoor Use above for Spiral Tree Assembly. (4) Secure the Spiral
tree to the ground by tying the strings to the Ground Stakes and firmly push the Ground Stakes
into the ground. (See FIG.5)(5) Adjust the four Strings/Ground Stakes so the Spiral Tree rests
evenly. (6) Plug in.
FIG.4 FIG.5
FIG.1 FIG.2 FIG.3