TTS EY07202 User manual

GB
Quick Start Guide
EY07202TTS Group Ltd., Park Lane Business Park,
Kirkby-in-Ashfield, Nottinghamshire, UK NG17 9GU
Glow Rollers
Recharging Your Batteries
Insert the adaptor cable into the charging socket at side of the docking station.
Plug the adaptor into a wall socket.
Place the Glow Rollers into the docking station ensuring they are fully connected.
It may take up to 4 hours to fully charge if the battery has been fully discharged.
The Glow Rollers will flash red to show that the batteries are low and the product needs
charging.
The Glow Rollers will light solid red when charging.
The Glow Rollers will light solid green when fully charged.
Only charge your Glow Rollers in the docking station and only use the battery charger
provided.
To switch the Glow Rollers on, move the slide switch to the ON position.
When the Glow Roller is positioned with the On/Off switch at the bottom or the Glow Roller
positioned horizontally the lights will cycle through seven different colours. When the Glow
Roller is turned with the On/Off switch facing upwards the lights will stay on the current
colour at point of turn.
Always switch your Glow Rollers off when not in use to preserve the battery life.
Using Your Glow Rollers
Important Information
Please retain the informationin this User Guide for future reference.
Please read all instructions fully beforeusing.
To clean, wipe the surface with a clean damp cloth.
Do not allow the product to come intocontact with water or other liquids.
Keep the product awayfrom direct sunlight and heat.
If your product malfunctions please switch it off and then back onagain toreset it.
Battery Precautions
Glow Rollers are powered by lithium battery packs which are not user replaceable.
Do not attempt to remove the battery packs.
This product comes with a5V 1A adaptor.
Contents of Pack
¥6 x Glow Rollers
¥ Docking Station
¥ International Charging Adaptor
¥ User guide
LED
DC Jack
On/Off
Know Your Glow Rollers
www.ttsgroupsupport.com
International Power Supply
The Glow Rollers docking stationis supplied with a multi-region power supply which is
supplied with the UK plug fitted. This can easily be changed to suit any country. Press the
release button to release the UK plus and replace with the required plug module.Ensure
that the plug “clicks” in place securely.
It is not possible to operate the toy during charging.
The charger must be regularly examined for damage to the cord, plug, enclosure and
other parts, and in the event of such damage, they must not be used until that damage
has been repaired.