Turbo TS25 Smart Instruction Manual

KEEP THIS USER MANUAL FOR FUTURE REFERENCE.
SMART ELECTRIC FIREPLACE
CONNECTION GUIDE
MODEL NO: TS25 Smart

Connect to AIR.ai App
Use the AIR.ai App to control your electric fireplace from your iPhone or Android
device even when you are away from the home.
System Requirements
• Supported wireless routers must have an available 2.4 GHz operating frequency
• Standard: 802.11b/g/n bands
• Supported smartphone systems: Android 4.4 or later
iOS 9.3 or later
Operation Guide
Please scan this QR code to watch the step-by-step guiding video.
A. Scan the QR code below or search ‘AIR.ai’ on App Store or Google Play and
download it.
01
AIR.ai

B. Launch the AIR.ai App and log in to your account (sign up for your first use).
C. Turn on the Bluetooth of your phone and connect your phone to your Wi-Fi.
D.
1. When the fireplace is plugged in, it will automatically enter Wi-Fi pairing mode.
During this mode, the screen will flash 'PO', and pressing any buttons will exit the
Wi-Fi pairing mode and switch the device to standby mode.
2. The WiFi mode will automatically turn off after 60 seconds of inactivity. To
reactivate the Wi-Fi pairing mode, press and hold the Timer Button for 5 seconds.
The screen will continuously flash 'PO'.
02

E. Back to the AIR.ai App. Press the ‘+’ button in the top right corner. The App will
search for the fireplace automatically. Press the ‘Go to add’ button to add your
device.
F. Choose your Wi-Fi (the one your phone is connected to) and enter the password.
Press the ‘Next’ button to continue.
03

G. The AIR.ai App starts connecting to your device. It may take some time, please
wait patiently.
H. Once you have set up the connection, you will find your fireplace in the device
list. You can rename your device and get started now.
04
Note:
The fireplace WiFi cannot connect 2 mobile devices at the same time, but it can be
shared via the App with others after connecting one device.
To change the control mobile device, please delete it on the App in the previous
mobile device to set it back to default setting mode, then repeat above connect
steps on the new mobile device.