Ubiquiti UC-Display13 User manual

Ubiquiti Inc.
FCC E-Label Information
Model: UC-Display13
A. Information to be displayed
1. The information that will be displayed on the e-label and information that will remain in the user manual
is shown below:
Information On e-label In Manual
FCC ID number Yes No
DoC logo No No
15.19 statement (“This device
complies with part 15 of the FCC
Rules. Operation is subject to the
following two conditions: (1)
This device may not cause
harmful interference, and (2) this
device must accept any
interference received, including
interference that may cause
undesired operation.”)
Yes No
Class A / B Digital Device user
manual statements1
Yes No
DoC declaration1 Yes No
Caution to the user that changes
or modifications not expressly
approved by the party responsible
for compliance could void the
user's authority to operate the
equipment1
Yes No
Describe any other FCC
regulatory information included
in e-label 1
Yes No
1 If the e-label includes information typically included in the manual then the e-label shall clearly
differentiate between information required to be on the device’s surface and information required to be in
the manual – refer to 784748 D02 e labelling v01 section II D 3(b)

The e-label is provided as the document E-Label-User-Manual-5206472 pdf.
B. Access to the required information on the e-label 1. Users are able to access the information in no
more than three steps in a device’s menu.
The actual steps are:
E-label and warning statements can be found in the device/controller GUI under Device >
Overview > E-labe info
No special access codes or permissions are required to go through the above steps
beyond entering a user-defined password to protect against unauthorized access to the
device.
2. The information is stored on the device, no special accessories or supplemental
plug-ins (e.g., a SIM/USIM card) are required to access the information.
Yes
3. Users are provided specific instructions on how to access the information.
The information to the user is provided in the last page of user manual. The document
E-Label-User-Manual-5206472 pdf is uploaded on TIMCO website.
C. Labeling for Importation and Purchasing
Products utilizing e-labels are required to have a physical label on the product at the
time of importation, marketing and sales. For devices imported in bulk and not packaged
individually, a removable adhesive label or, for devices in protective bags, a label on the bags is
acceptable for this purpose. Any removable label shall be of a type intended to
survive normal shipping and handling and must only be removed by the customer
after purchase. For devices imported already in individual packages ready for sale, the
information may alternatively be provided on the package. It shall contain:
1. The FCC ID and/or the DoC logo (if applicable); and
2. Any other information required by specific rule to be provided on the surface of
the product unless such information is permitted to be included in the User’s manual
or other packaging inserts.
FCC ID and model number are present on the device back plate

D. Other considerations
1. The above information must be programmed by the responsible party and the
information must be secured in such a manner that third-parties cannot modify it.
The e-label information is pre-programmed by the grantee. The user cannot modify
the e-label information.
2. All the applicable regulatory information required on the packaging or user
instructions must be provided according to the rules even if it is displayed
electronically. For example, hearing aid compatibility (HAC) ratings for the phones as
specified in 47 C.F.R. § 20.19.
Yes it is provided. The information required by the applicable FCC rule exists in
the e-label. The document E-Label-User-Manual-5206472 pdf was uploaded on TIMCO website.