Ubiquiti UAP User manual

Enterprise WiFi System
Models:
UAP
UAP-LR (Long Range)

1
Introduction
Introduction
Thank you for purchasing the Ubiquiti UniFi Enterprise WiFi
System. The UniFi Enterprise WiFi System includes the UniFi
Controller software that allows you to manage your wireless
network using your Web browser.
This Quick Start Guide is for use with the following UniFi Enterprise
WiFi System Access Point models. Unless otherwise needed to
specify differences between the two models, this Quick Start
Guide will refer to both as UniFi AP.
Model Maximum Power
Consumption
Maximum TX
Power
UniFi AP
(UAP) 4W 20 dBm
UniFi AP Long Range
(UAP-LR) 6W 27 dBm
The UniFi Enterprise WiFi System also includes the necessary
hardware for mounting the unit on a wall or a ceiling. The UniFi
Enterprise WiFi System supports Passive PoE which works with the
included PoE adapter.
If you want to power the UniFi AP from an 802.3af compliant
switch, Ubiquiti Networks offers the optional Instant 802.3af
Adapter to instantly transform any PoE device into a fully 48V
802.3af compliant product. Product details are available on our
website at http://ubnt.com/8023af

2
UniFi AP/UniFi AP-LR
Package Contents
Wall Mount
UniFi AP Wall-Mount Bracket Ceiling-Mount Plate
Enterprise WiFi System
UniFi Controller
CD with User Guide Quick Start Guide 24v PoE Adapter Power Cord
M3X30 Flat Head
Screw (Qty. 3)
M3 Keps Nut with
Tooth Washer
(Qty. 3)
M2.9x20 Self Tapping
Screw (Qty. 3)
M3x20 Screw
Anchor (Qty. 3)
System Requirements
• Microsoft Windows XP, Windows Vista, Windows 7, or Mac OS X
• Java Runtime Environment 1.6 (or above)
• Web Browser: Mozilla Firefox, Google Chrome, or Microsoft
Internet Explorer 8 (or above)

3
Network Topology Requirements
Network Topology Requirements
• A DHCP-enabled network (for AP to obtain an IP as well as for
the wireless clients after the deployment).
• Access point(s) and either an on-site management station
computer running the UniFi Controller software connected to
the same Layer-2 network or located in an off-site cloud or NOC.
or
Router
O-Site
Cloud/NOC2
On-Site
Management Station
Wired UAP/UAP-LR
Wireless
Uplinked1
UAP/UAP-LR
Sample Network Diagram
Note: 1Please refer to the UniFi Enterprise WiFi
System User Guide | UAP/UAP-LR for setting up
Wireless-Linked APs. 2All UniFi APs support Off-Site
Management Controllers. See User Guide for setup
details.

4
UniFi AP/UniFi AP-LR
Hardware Installation
The UniFi AP is powered by the included PoE (Power over Ethernet)
adapter. To install the UniFi AP, perform the following steps:
1. Connect an Ethernet cable to the Ethernet port on the
UniFi AP.
2. Connect the power cord to the power port on the PoE Adapter.
Connect the other end to of the power cord to a power outlet.

5
Hardware Installation
3. Connect the other end of the Ethernet cable to the Ethernet
port labeled PoE on the PoE Adapter.
Note: If you plan to mount the UniFi AP on your ceiling,
perform the ceiling mount installation steps before
connecting the Ethernet cable to the PoE Adapter.
Below is an overview of the PoE connections.
Power Connection Diagram

6
UniFi AP/UniFi AP-LR
Mounting the Access Point
The UniFi AP can be wall-mounted or mounted on a ceiling.
Perform the following steps for the appropriate installation:
Wall-Mount
1. Align the wall-mounting bracket with the Wall Mount text
facing up. There are horizontal and vertical lines on the bracket
to help with orientation.
Wall Mount
Wall Mount text
2. Use a pencil to mark the holes on the wall.
3. Use a 6 mm drill bit to drill the holes in the wall.
4. Insert the 3 screw anchors into the wall.
5. Secure the wall-mount bracket to the wall by inserting the self
tapping screws into the anchors.
Wall Mount

7
Hardware Installation
6. Align the notches on the UniFi AP with the notches on the
wall-mount bracket.
Wall Mount
7. Turn the UniFi AP clockwise until it locks into place.
Wall Mount

8
UniFi AP/UniFi AP-LR
Ceiling-Mount
1. Remove the ceiling tile.
2. Align the ceiling-mount plate to the center of the top side of
the ceiling tile.
3. Use a 3.5 mm drill bit to drill holes for the three flat head
screws.
4. Cut or drill a circle approximately 25 mm in size that lines up
with the larger circle on the ceiling-mount plate. This will be
used for the Ethernet cabling.
5. Secure the wall-mount bracket and ceiling-mount plate to the
ceiling tile using the 3 flathead screws and 3 nuts with tooth
washers.

9
Hardware Installation
6. Feed the Ethernet cable through the hole and then align the
UniFi AP with the notches on the wall-mount bracket.
Note: The UniFi AP supports Passive PoE which works
with the included PoE adapter. If you want to power
the UniFi AP from an 802.3af compliant switch, Ubiquiti
Networks offers the optional Instant 802.3af Adapter
to instantly transform any PoE device into a fully 48V
802.3af compliant product. Product details are available
on our website at http://ubnt.com/8023af
7. Turn the UniFi AP clockwise until it locks into place.

10
UniFi AP/UniFi AP-LR
Software Installation
Insert the UniFi Controller software CD into your CD-ROM drive
and follow the instructions for your specific computer type.
Mac Users
1. Click on the Install icon.
2. Click Continue and follow the on-screen instructions to install
the software.

11
Software Installation
3. Go to Go > Applications and double-click the UniFi icon.
Proceed to Configuring the UniFi Controller Software on page 13.
PC Users
1. Launch UniFi-installer.exe.
2. Click Install.
3. If your computer doesn't have Java 1.6 or above installed, you
will be prompted to install it. Click Install to continue.

12
UniFi AP/UniFi AP-LR
4. Click Next.
5. Be sure the Start UniFi Controller after installation option is
checked and click Finish.
Note: The UniFi Controller software can also be
launched from Start > All Programs.

13
Software Installation
Configuring the UniFi Controller Software
1. The UniFi Controller software startup will begin. Click Launch a
Browser to Manage Wireless Network.
2. Select your language and country. Click Next.
3. Select the devices that you want to configure and click Next.

14
UniFi AP/UniFi AP-LR
4. The UniFi Installation Wizard will create a secure primary
wireless network for your devices. Perform the following steps:
a. Enter the wireless network name (SSID) in the Secure SSID
field.
b. Enter a passphrase to be used for your primary network.
c. If you want to enable guest access, select Enable Guest
Access and enter a guest network name in the Guest SSID
field.
d. Click Next.
5. Enter an admin name and password to use when accessing the
management interface. Confirm your password in the Confirm
field. Click Next.

15
Software Installation
6. Review your settings. Click Back to make changes or Finish to
save your settings. Once finished you will be redirected to the
management interface via your web browser.
Congratulations, your wireless network is now configured.
A login screen will appear for the UniFi Controller management
interface. Enter the Admin Name and Password that you created
and click Login.
You can manage your wireless network and view network statistics
using the UniFi Controller management interface. For information
on configuring and using the UniFi Controller software, refer to the
User Guide located on the CD.

English
We recommend that you protect your networks from the
most brutal environments and devastating ESD attacks with
industrial-grade shielded Ethernet cable from Ubiquiti Networks.
For more details, visit www.ubnt.com/toughcable
Deutsch
Schützen Sie Ihre Netzwerke vor extremen Umwelteinflüssen
und verheerender elektrostatischer Entladung (ESD), indem
Sie abgeschirmte Ethernetkabel in Unternehmensqualität von
Ubiquiti Networks verwenden. Weitere Informationen erhalten Sie
unter www.ubnt.com/toughcable
Español
Le recomendamos que proteja sus redes de los entornos más
hostiles y los devastadores efectos de las descargas electrostáticas
utilizando cable Ethernet blindado con calidad-industrial de
Ubiquiti Networks. Para obtener más información, visite
www.ubnt.com/toughcable
Français
Nous vous recommandons de protéger vos réseaux contre les
environnements les plus brutaux et les décharges électrostatiques
les plus dévastatrices avec un câble Ethernet Ubiquiti Networks
avec blindage renforcé. Pour en savoir plus, rendez-vous sur
www.ubnt.com/toughcable
Italiano
Si consiglia di proteggere le reti dagli ambienti e dagli attacchi
ESD più invasivi con il cavo Ethernet schermato-di tipo industriale
di Ubiquiti Networks. Per ulteriori informazioni, visitare il sito Web
www.ubnt.com/toughcable
MA090111

Ubiquiti Networks Support
Email: suppor[email protected]om
Phone (9 a.m. - 5 p.m. PST): 408-942-1153
Online Resources
Wiki Page: www.ubnt.com/wiki
Support Forum: www.ubnt.com/forum
Downloads: www.ubnt.com/support/downloads
www.ubnt.com
© 2011 Ubiquiti Networks, Inc. All rights reserved.