UBTECH Ulyte User manual

Ulyte User Manual
ProductName：Ulyte（U：you、UBTECH；lyte：light））
ProductModel：UP3001
Product Category：Pocket GimbalCamera
Read Before First Use
Make sure to read the following documents before using Ulyte.
It is recommended to read the user manual and watch the tutorial videos on UBTECH official
website (www.ubtrobot.com) or the Ulyte APP before using it for the first time. Please contact
UBTECH or the authorized agents if you encountered any problemswhen using or
maintaining your device.
. OverviewⅠ
1. About Ulyte
Ulyte is a 3-axis intelligent hand-held gimbal camera that combines mobility and stability in one device.
It shoots stable video at up to 4K 60fps and 12 mega pixel photos. The camera's live view is displayed
on the 1.3-inch onboard touchscreen. Intelligent settings include HDR Video, Panorama, Timelapse and
Slow Motion, as well as the joystick and zoom slider in the camera body, help you get the great shot.
With the dual microphones and various shooting modes, you can experience high-quality sound
recording and photos. By connecting Ulyte to the Ulyte APP on your smartphone via the wireless
module, you can manage it remotely and experience real-time previews of HD photographs and smart
video editing before sharing to social media with a single click.

Note:
(1) Accessories (not provided) such as an external tripod and extension rod can be inserted into the
1/4-inch thread hole.
(2) When capturing videos, avoid blocking the microphone for improved audio quality.
2. Activating Ulyte
When using the device for the first time, activation is required through Ulyte APP on your
smartphone.
(1) Press and hold the Power button to power onthe device;
(2) Launch the Ulyte APP;
(3) To activate Ulyte, go to the home screen and choose 'Connect.' Then follow the on-screen
instructions.
Note: Do not touch the gimbal when it is powering on. Otherwise, the performance may be
affected.
. Preparation Before UseⅡ
(1) Charging
Choose the provided USB-C cable to connect Ulyte USB-C jack for charging. For charging, a
5V/2A adapter is recommended (not provided).
(2) Install the Micro SD card
A UHS-I Speed Grade 3 rating microSD card (not provided) is required due to the fast read
and write speed necessary for high-resolution video data. It can support max 256GB SDHC.
As shown below, insert the microSD card into the microSD card slot .

. OperationⅢ
(1) Power/Record Button
Power On & Off
Operation Descriptions
Power on Press and hold the button for 2 seconds
Power off Press and hold the button for 3 seconds
Shutter/Record
Record Mode Operation Descriptions
Photo Take photos Press once
Video
Start recording Press once
Finish recording(under
recording）
Press once

(2) Gimbal Joystick
Operation Descriptions
Push up Turn the lens up
Push down Turn the lens down
Turn to left Turn the lens to left
Turn to right Turn the lens to right
Turn to upper left Turn the lens to upper left
Turn to upper right Turn the lens to upper right
Turn to lower left Turn the lens to lower left
Turn to lower right Turn the lens to lower right
Note: The rotation direction of the lens mentioned above shall be under the condition that the lens
is in the forward direction.
(3) Zoom Slider
Operation Descriptions
Turn up To increase focal length
Turn down To reduce focal length
Note: the maximum focal length is 3 times and the minimum focal length is 1 times.

(4) Touchscreen
Camera View
1. Re-center: to re-center the gimbal;
2. Flip: switch the camera between facing forward and backward;
Swipe Left
Swipe left on the touchscreen to enter the settings of the shooting mode;
Swipe up or down to select a shooting mode;
Swipe Right
Swipe right on the touchscreen to enter the media library;
Swipe up or down to scroll through photos and videos, and delete or save them;
Swipe Up
Swipe up on the touchscreen to enter the
settings of shooting parameters;
Set parameters such as countdown, continuous shooting, active track, exposure, white balance,
resolution, and frame rate;
Swipe Down
Swipe down on the touchscreen to enter the menu, where you can swipe left or right and click the
icon to enter the settings;

1.
G



2.
W
3. F
u
4.S
D
5. S
e
6.
K
6.1
G
6.2
S
6.3
(Ul
y
han
d
6.4
A
6.5
cert
a
6.6
L
G
imbal Mode
Follow: the
vertically a
f
Tilt Locked
:
axis rotates
FPV: the p
a
W
i-fi: enable
o
u
ll-Screen S
e
D
Card: displ
a
e
ttings: displ
a
K
ey Tone: tap
G
imbal Sens
i
Fast Foll
o
Slow Fol
l
S
peed of Joy
s
Calibration
o
y
te should b
e
d
);
A
nti-Flicker:
Automatic
S
a
in period of
L
anguage: se
tilt and pa
n
f
ter reaching
t
:
the tilt axis
vertically aft
e
a
n, tilt, and r
o
o
r disable Wi
-
e
tting: set ful
l
a
y the used c
a
y mores set
t
to turn the k
e
i
tivity: Selec
t
o
w: the gimb
a
l
ow: the gim
b
s
tick: select t
h
o
f Gimbal:r
e
e
placed on
a
select an ant
i
S
hutdown: s
e
time, it will
s
t the display
n
axes of th
t
he limit;
of the gimba
e
r reaching t
h
o
ll axes follo
w
-
Fi and chec
k
l
-screen or le
t
apacity and t
o
t
ings as sho
w
e
y tone on a
n
t
the sensitiv
i
a
l responds
fa
b
al responds
h
e 3 speeds
o
e
ducedrift ca
u
a
flat and st
i
-flicker freq
u
e
t the autom
a
s
hut down a
u
language of
t
e gimbal fo
l
l is locked, a
n
h
e limit;
w
;
k
the Wi-Fi c
o
t
terbox displ
a
o
tal capacity
w
n below;
n
d off;
i
ty of Follow
fa
ster and mo
v
slower, but t
h
o
f joystick to
u
sed by nea
r
able surface
u
ency accor
d
a
tic shutdo
w
u
tomatically;
t
he Ulyte;
l
low the ha
n
n
d the pan a
x
o
nnecting Q
R
a
y;
of microSD
v
es abruptly;
h
e movemen
t
control the
m
r
by magneti
c
during cali
b
d
ing to local
r
w
n duration.
I
n
dle, and th
e
x
is follows t
h
R
code.
card, and for
m
t
is smoother
;
m
ovement;
c
interferenc
e
b
ration and c
r
egulations;
I
f Ulyte is
n
e
roll axis r
o
h
e handle. Th
e
m
at the SD
c
;
e
or human
c
annot be he
l
n
ot used wit
h
o
tates
e
roll
ard;
error
l
d by
h
in a

6.7 More: view the firmware information of Ulyte and reset system parameters.
(5) Status LED
Status LED Descriptions
Blinks green slowly Charging
Solid green Charging completed
Blinks red Battery level is low
Ⅳ.APPInstallation
Before using the device, download and install the UlyteAPP.
Download and install the Ulyte APP by scanning the QR Code on the right with your smart phone,
or searching for "Ulyte" in the APP store.
QR Code (to be inserted)
Note: The iOS version of Ulyte APP is compatible with iOS v11.0 and later. The Android version
of Ulyte APP is compatible with Android v7.0 and later.
Ⅴ. Updating Firmware
Ulyte Camera firmware must be updated using the Ulyte APP. When a new firmware is available,
a prompt will show. Please follow the on-screen instructions to update the firmware.
Note:
(1) During the firmware upgrade, a microSD card must be installed.
(2) Make sure that the battery level of Ulyte is at least 20% before updating firmware.
. Product ParametersⅥ
Product Name: Ulyte
Product Model: UP3001

Wi-Fi: 2.4g +5G, frequency 44
Gimbal
Mechanical Range of Pan Axis: +60~-260°
Mechanical Range of Tilt Axis: ±90°
Mechanical Range of RollAxis: ±90°
Controllable Range of PanAxis: +60~-260°
Controllable Range of TiltAxis: ±90°
Controllable Range of RollAxis: ±90°
Maximum Controllable Speed: 120°/s
Angular Vibration Range: ±0.005°
Battery
Capacity: 3200 mAh
Input Voltage/Current: 5V/2A
Charging Time: 150min
Continuous Recording Time: 120min
Shooting
Maximum Resolution: 4000*3000
Photo Format: JPG
Video Maximum Resolution: 4K@30fps
Video Format: MP4
Video Coding: H.265/H.264
Max Video Bitrate: 100 Mbps
Ⅶ. Maintenance
1. Storing Ulyte
With Ulyte powered off and in storage mode, place Ulyte into the flannelette bag and then
place the device into the storage bag. To avoid unwanted damages to lens, screen and surface
of the camera, make sure to avoid keys, clippers and other sharp objects in the bag.
2. Precautions
(1) When Ulyte is turned on, make sure nothing is obstructing the gimbal.
(2) When using the Ulyte, keep the lens and screen clean. It is recommended to use the lens
wiping cloth.
(3) Ulyte is not waterproof. Keep the device away from liquids and avoid submerging it in
water or getting it wet. In the rain or in a damp environment, DO NOT USE THE DEVICE.
(4) Use the device in temperatures ranging from 0 to 40 ;℃℃
(5) After charging or if the device is not charging, unplug the adapter from the device and
remove it from the power socket.
(6) Ulyte has a built-in battery that cannot be removed. DO NOT replace the battery by
yourself as the battery or device may be damaged. The battery should only be replaced by the
after-sales service center;

(7) Do not store the battery for a long time after it is completely discharged, as it may cause
damage to the cell in over-discharged state, which will render it unusable.
(8) Ulyte may be damaged if the device and accessories are subjected to heavy impact or
vibration. DO NOT use any chemical solutions or cleaning agent.
(9) Do not expose Ulyte to high temperatures, such as under sunlight, around heaters、
microwave ovens、ovens or water heaters, etc., as overheating may cause explosion;
(10) If Ulyte is not used for more than 10 days, discharge the battery level to 40%-65% for
storage, as it may extend the service life of the battery effectively;
(11) Discharge and charge the battery completely once every three months to keep it in good
condition.
(12) Avoid touching or covering the heat dissipation area with your body because it may
become hot during usage and cause burns;
(13) Don't allow children or pets to swallow or bite the device or accessories as it may cause
them harm.
Ⅷ. Name and Content of Hazardous Substance
Components
Name
Hazardous Substance
Pb Hg Cd
Cr (Ⅵ) PBB PBDE
Plastic shell ΟΟΟΟΟΟ
Circuit
board ΟΟΟΟΟΟ
Metal ΧΟΟΟΟΟ
Cable ΟΟΟΟΟΟ
This table is compiled according to the stipulation of SJ/T 11364.
○: refers to the condition that the content of the hazardous substance in all homogeneous materials
is within the limitation of GB/T26572 requirements.
×: refers to the condition that the content of the hazardous substance in one homogeneous material
of the component exceeds the limitation of GB/T26572 requirements.

Ⅸ. Contact Us
WeChat official of UBTECH Service (scan the QR code to follow the official)
. Warranty ServicesⅩ
(1) Warranty Policy
1. If the product has a non-human performance failure that is in line with the Performance
Failure Table of the Ulyte, within 30 natural days from the date of purchase.you can enjoy
repair, replacement and refund services for free after detection and confirmation by UBTECH
after-sales service center.
2. If the device has a non-human performance failure that is in line with the Performance
Failure Table of the Ulyte within 12 months from the date of purchase, you can enjoy repair
services for free after detection and confirmation by UBTECH after-sales service center.
Notes: Please supply a complete set of items for return and exchange of Ulyte, including a
complete set of packing boxes, the device and all of its spare parts, gifts (if any), etc.
(2) Performance Failure Table of Ulyte
Product Name Performance Failure List
Ulyte The device cannot turn on or turn off normally
The buttons and screen are inoperable and unresponsive.
Unable to use the camera shooting and video record functions
The stabilizer is unbalanced and unable to function properly
The product cannot charge properly
Obvious manufacturing defects are found when the device is not in use
（3）Warranty Period
Product Type Warranty Period
Ulyte 12 months
Accessories such as USB cable, hand No warranty period