UEi CA383B User manual

1-800-547-5740 • Fax: [phone]
www.ueitest.com • email: [email protected]
CA383B
INSTRUCTION MANUAL

Introduction
The CA383B measures both AC and DC current and is compatible with
most DMMs which have a 200mV and 200mA AC range or a 40mA and
400mA AC range.
Features include
• 300 Amps AC
•Max. jaw opening 1.2” (30mm)
•Dimensions: 3.1 x 6.1 x 1.4 (89 x 156 x 35mm)
•Output: 1mV AC per 0.1 Amp AC
Operating Instructions
Measuring AC Current
1. Observing the polarity markings on the CA383B connector,
plug the test lead into the input jacks on your digital
multimeter. The "-" on the CA383B connector plugs into
the "COM" jack and the "+" plugs into the "mA/µA" jack on
your multimeter.
2. If your multimeter is equipped with a 20mA and 200A AC range
use one of the following settings:
a) Set the multimeter on 20mA AC and the CA383B on the 40
range for measuring 0 to 20A AC.
b) Set the multimeter on 200mA AC and the CA383B on the
400 range for measuring 0 to 200A AC.
If your multimeter is equipped with a 40mA and 400A AC range
use one of the following settings:
a) Set the multimeter on 40mA AC and the CA383B on the 40
range for measuring 0 to 40A AC.
b) Set the multimeter on 400mA AC and the CA383B on the
400 range for measuring 0 to 400A AC.
3. Clamp the jaw of the CA383B around a single current
carrying wire.
NOTE: Clamp around only one wire at a time. If the CA383B
is clamped around two or more wires, it will not work properly
4. Take the reading directly from the digital multimeter's display.
NOTE: 1mV = 1A
Specifications
CA383B-MAN P. 1
Measuring Ranges
AC Amps 0-20A on 20mA or
200mV on 200mA AC range
0-40A on 40mA or
400mV on 400mA AC range
Output
AC Amps 1mV AC per 1A AC
Accuracy
40A ±(1.5% of reading +2
least significant digits)
400A ±(1.5% of reading +4
least significant digits)
Operating Temperature
+32˚F to 122˚F (0˚C to 50˚C)

Limited Warranty
The CA383B is warranted to be free from defects in materials and workmanship for a period
of one year from the date of purchase. If within the warra n ty period your instrument should
become inoperative from such defects, the unit will be repaired or replaced at UEi’s option.
This warra n ty covers normal use and does not cover damage which occurs in shipment or
failure which results from alteration, tampering, accident, misuse, abuse, neglect or improper
maintenance. Batteries and consequential damage resulting from failed batteries are not
covered by warra n ty.
Any implied warranties, including but not limited to implied warranties of merchantability
and fitness for a particular purpose, are limited to the express warranty. UEi shall not
be liable for loss of use of the instrument or other incidental or consequential damages,
expenses, or economic loss, or for any claim or claims for such damage, expenses or
economic loss. A purchase receipt or other proof of original purchase date will be required
before warra n ty repairs will be rendered. Instruments out of warra n ty will be repaired
(when repairable) for a service charge. Return the unit postage paid and insured to:
1-800-547-5740 • FAX: [phone]
www.ueitest.com • Email: [email protected]om
This warranty gives you specific legal rights. You may also have other rights which vary from
state to state.
CA383B
Clamp-On Adapter
Copyright © 2007 UEi CA383B-MAN 11/07
PLEASE
RECYCLE