UGO BASILE 47400-030 User manual
UGO BASILE S.R.L.
assembling instruction
USB Camera
Cat. No. 47400-030
Cat. No. 47400-040
Page 1
assembling instructions (Rev. 2)
USB Cameras
Cat. No. 47400-030 / 47400-040
1 How to assemble Camera 47400-030
The camera is shipped disassembled; follow these steps to assemble it correctly.
The camera is delivered with a
protective cap (1) and a lens
adaptor* (2).
Remove both, as you will not
need them for standard opera-
tion.
(* the lens adaptor is provided as
standard with the videocamera, for
possible other applications)
You will find in the 47400-030 kit, beside the camera, the following components (see pic-
ture):
3) TBL2.1: 2.1mm Optics (for Rat cage)
4) TBL4.0: 4.0mm Optics (for Mouse cage)
5) TLHCCS: M12 Adaptor
2
1
1
2
Page 2
assembling instructions (Rev. 2)
Assemble the M12 adaptor
on the camera body.
Let’s consider the two optics included with the 47400-030 camera; they are both provided
with a visible light block filter (6) already fitted in the correct position.
If necessary, the filter separates easily from
the optics.
To reassemble it, just exert a light pressure.
The filter to be assembled on the 2.1mm
lens is provided with a support ring, while on
the 4.0mm lens, the
filter fits without any
support.
6
5
4
3
Page 3
assembling instructions (Rev. 2)
Insert and tighten the correct
optics (2.1 for rat cage, or 4.0
for mouse cage) inside the
support.
Here’s how the assembled
camera looks like.
Replace the optics if you plan
to change from mouse to rat
cage or viceversa.
Now assemble the ceiling
mount bracket to the camera.
Prepare all the necessary
components in the correct
order (pay attention to the
orientation of the camera).
Page 4
assembling instructions (Rev. 2)
Attach the bracket to the
camera, by the two screws
provided (the arrows indicate
where the screws must be
positioned)
Once the camera is attached to the cubicle ceiling, act on the optics, by turning it, until
the correct focus is reached.
2 How to assemble Camera 47400-040
The camera is shipped disassembled; follow these steps to assemble it correctly.
The camera is delivered with a
protective cap (1) and a lens adap-
tor* (2).
2
1
Page 5
assembling instructions (Rev. 2)
Remove both, as you will not
need them for standard opera-
tion.
(* the lens adaptor is provided as
standard with the videocamera, for
possible other applications)
The 47400-040 kit, beside the camera, in-
cludes the Day&Night 2.8-12mm Varifocal
Lens, model YV4.3x2.8SA-2.
Remove the protective cap (3) before fit-
ting the optics to the camera.
Assemble the Varifo-
cal Lens on the cam-
era body.
1
2
3
Page 6
assembling instructions (Rev. 2)
Here’s how the assembled camera
looks like.
Once the videocamera has been in-
stalled, the
commands on the lens
body will enable you to
obtain the
best view (WIDE< >TELE
) and
reach the correct focus (NEAR < >
FAR).
A mounting bracket is
provided with the standard
package,
to fix the camera
on a wall or on the ceiling
over the test area.
Attach the videocamera to
bracket the via
one of the
two threaded holes.
Page 7
assembling instructions (Rev. 2)
3 Customer Support
For any further information you may need concerning the installation and/or use of the
cameras, please do not hesitate to contact our service department (or our local distribu-
tor) either directly of via our support page http://www.ugobasile.com/support.html :
UGO BASILE s.r.l.
Via G. Di Vittorio 2
21036 GEMONIO – Varese, ITALY
Phone : +39 0332 744574
4 Ordering Information
47400-030
B/W USB Camera
(Fear Conditioning), including:
DMK22AUC03
Videocamera
TBL2.1
2.1mm M12 optics (for rat cage)
TBL4.0
4.0mm M12 optics (for mouse cage)
TLH CCS
M12 adaptor
M-CM 566-F
Visible light block filter
M-LM 889-F
Ceiling support (for Isolation Cubicle)
E-WP 043
5m USB cable CAA
-90LMB5-5M
47400-040
B/W USB Camera
(general purpose), including
DMK22AUC03
Videocamera
YV4.3x2.8SA-2
Day&Night 2.
8‐12mm Varifocal Lens
GPMSTP160
Ceiling support
E-WP 043
5m USB cable CAA-90LMB5-5M
_______________________________________________________________________
INSTRUCTION MANUAL June 2016 REVISION 2
Device Drivers
Device Driver for The Imaging Source USB 2.0 Cameras.
Software Development Kits (SDKs)
IC Imaging Control .NET Component, C++ Class Library, IC Imaging
Control C Library, IC Imaging Control for VC++ 6.0, IC Imaging
Control ActiveX and IC Imaging Control ActiveX Runtime Setup.
Programming Samples
Barcode Scanner C# Sample for IC Imaging Control.
Extensions
TWAIN Source for IC Imaging Control, Cognex VisionPro AIK Plugin
for IC Imaging Control, ActivVisionTools Driver for IC Imaging
Control, HALCON Extension for IC Imaging Control, LabVIEW
Extension for IC Imaging Control and IC Matlab Plugin for Matlab
10.0.
End User Software
IC Capture, Image Acquisition.
Software Tools
Processor Idle State Manager.
DMK 22AUC03 Monochrome Camera
The Imaging Source "22" Series USB 2.0 Camera
Only 36 x36 x25 mm
Lens not included
The Imaging Source DMK 22AUC03 monochrome camera has a USB 2.0 interface and is the perfect
solution for many industrial automation, quality assurance, security, surveillance and medical applications.
The monochrome camera ships with the very sensitive / " Micron CMOS MT9V024 sensor. With up to 150 images
per second, the DMK 22AUC03 is a low cost, yet highly versatile imaging solution. The camera includes a C to CS mount
adapter, making it compatible to C and CS mount lenses. Using the optional CS to M12 board lens adapter, the camera is
also compatible to M12 board lenses.
Drivers, SDKs, programming samples, extensions and end-user software for Microsoft Windows can be freely downloaded from our
web site (see below). Community-driven, Open Source projects allow the camera to be used on Linux. Extensions for Microsoft
Windows enable the camera to be integrated in to common machine vision software libraries, such as LabView. In addition, the camera
is compatible to the Open Source computer vision library, OpenCV.
Features
USB 2.0 interface.
Windowing and high-speed readout.
/ " Micron CMOS MT9V024.
Global shutter.
Up to 744 x480 (0.4 MP).
Up to 150 images per second.
Compatible to C and CS mount lenses.
Only 36 x36 x25 mm.
Accessories
CS to C mount adapter (shipped as standard).
CS to M12 board lens adapters.
C and CS mount lenses.
M12 board lenses.
Standard USB 2.0 cable in various lengths.
5 m USB 2.0 cable with fixing screws.
13
13
Cat. 47400-030
47400-040
UGO BASILE
DMK 22AUC03 Specification
GENERAL BEHAVIOR
Example Configurations
Resolution Format FPS Sensitivity
Set resolution, format, FPS and sensitivity with shipped software.
744 x480 (0.4 MP) / " 76 4.8 V/lux-sec
640 x480 (0.3 MP) / " 87 4.8 V/lux-sec
320 x240 (0.1 MP) / " 150 4.8 V/lux-sec
Color format Y800
Dynamic range 8 bit
INTERFACE (OPTICAL)
IR cut filter no
Sensor specification Micron MT9V024
Shutter Global
Format / "
Resolution H: 744 pixel, V: 480 pixel
Pixel size H: 6 µm, V: 6 µm
Lens mount C/CS
INTERFACE (ELECTRICAL)
Supply voltage 4.5 VDC to 5.5 VDC
Current consumption approx 250 mA at 5 VDC
INTERFACE (MECHANICAL)
Dimensions H: 36 mm, W: 36 mm, L: 25 mm
Mass 70 g
ADJUSTMENTS (MANUAL)
Shutter / s to / s
Gain 0 dB to 18 dB
ADJUSTMENTS (AUTOMATIC)
Shutter / s to / s
Gain 0 dB to 18 dB
ENVIRONMENTAL
Temperature (operation) -5 °C to 45 °C
Temperature (storage) -20 °C to 60 °C
Humidity (operation) 20 % to 80 % non-condensing
Humidity (storage) 20 % to 95 % non-condensing
Subject to change
13
13.5
17
13
110,000 14
110,000 14
Micron MT9V024 Spectral Response Curve
CMOS Sensor in DMK 22AUC03
Wavelength [nm]
Quantum Efficiency [%]
A
A
Dimensions:mm
Tolerances:DINISO 2768m
36
36
18
6,75
16,25
23 M6x1,depth8
1/4-20 UNC,depth8
16
415
12122
44
DMK 22AUC03 Dimensional Diagram
CAMERA 47400‐040 ALSO MOUNTS THE YV4.3x2.8SA-2 OPTICS
MOD. 13 Rev. 1
CE CONFORMITY STATEMENT
Manufacturer UGO BASILE srl
Address Via G. Di Vittorio, 2 – 21036 Gemonio, VA, ITALY
Phone n. +39 0332 744574
Fax n. +39 0332 745488
We hereby declare that
Instrument. Videocamera
Catalog number 47400-030, 47400-035, 47400-040
is manufactured in compliance with the following European Union Directives
and relevant harmonized standards
2014/30/UE relating to electromagnetic compatibility
Account Manager Mauro Uboldi
Nome / Name
October 2018
Date Firma / Signature
This manual suits for next models
1
Table of contents
