
Video Mode:
VIDEO
Burst Photo Mode:
BURST PHOTO
Tim e Lapse Mode:
TIME LAPSE
Photo Mode:
PHOTO
To take pictures, verify that the cam era is in Photo Mode. If The Video Icon on
Your cam era's LCD screen is not showing, press the Power/Mode Button
Repeatedly until it appears.
To take the pictures sim ply press the Start/Stop/Se le ct B utton . The camera
will emit a shutter sound as the pictures are being taken.
To record video, verify that the camera is in Video Mode. If the Video Icon
on your cam eras LCD screen is not showing, press the Power/Mode Button
repeatedly until it appears.
To Start Re cording :
Press the Start/Sto p//Se le ct B utton . The camera will em it one beep and the
camera Status Lights will flash while recording.
To S to p Re cordin g :
Press the Start/Sto p/Se le ct B utton . The cam era Status Lights stop flashing
and the camera emits one beep to indicate recording has stopped. This
camera automatically stops recording when the battery is out of power.
Your video will be saved before the camera powers down.
To capture a series of photos, verify that your camera is in Burst Photo Mode.
If the Burst Photo Icon is not showing on the LCD screen, press the
Powe r/Mode button repeatedly until it appears. In Burst Photo Mode, your
camera will take a series of 3 photos in 1.5 seconds.
To take the pictures sim ply press the Start/Stop/Se le ct B utton . The camera
will em it 3 shutter sounds as the pictures are being taken
To capture a Time Lapse series of photos, verify that the camera is in Tim e
Lapse Mode. If you do not see the Tim e Lapse Icon on the LCD screen, press
the Powe r/Mode Button repeatedly until it appears.
In Tim e Lapse Mode, your camera captures a series of photos every 2,3,5,10,
20,30 or 60 seconds depending on which option you chose in the Tim e Lapse
Menu.
To take the series of Photos, press the Start/Stop/Se le ct B utton . The cam era
starts to countdown and emits a beep every time a picture is taken. To stop
the process, sim ply press the Start/Stop/Se lect B utton again.
5