Video Mode:
VIDEO
Burst Photo Mode:
BURST PHOTO
Time Lapse Mode:
TIME LAPSE
Photo Mode:
PHOTO
To record video, verify that the camera is in Video Mode. If The Video Icon on
Your camera's LCD screen is not showing, press the Power/Mode Button
Repeatedly until it appears.
To take the pictures simply press the Start/Sto /Select Button. The camera
will emit a shutter sound as the pictures are being taken.
To record video, verify that the camera is in Video Mode. If the Video Icon
on your cameras LCD screen is not showing, press the Power/Mode Button
repeatedly until it appears.
To Start Recording:
Press the Start/Sto //Select Button. The camera will emit one beep and the
camera Status Lights will flash while recording.
To Sto Recording:
Press the Start/Sto /Select Button. The camera Status Lights stop flashing
and the camera emits one beep to indicate recording has stopped. This
camera automatically stops recording when the battery is out of power.
Your video will be saved before the camera powers down.
To capture a series of photos, verify that your camera is in Burst Photo Mode.
If the Burst Photo Icon is not showing on the LCD screen, press the
Power/Mode button repeatedly until it appears. In Burst Photo Mode, your
camera will take a series of 3 photos in 1.5 seconds.
To take the pictures simply press the Start/Sto /Select Button. The camera
will emit 3 shutter sounds as the pictures are being taken
To capture a Time Lapse series of photos, verify that the camera is in Time
Lapse Mode. If you do not see the Time Lapse Icon on the LCD screen, press
the Power/Mode Button repeatedly until it appears.
In Time Lapse Mode, your camera captures a series of photos every 2,3,5,10,
20,30 or 60 seconds depending on which option you chose in the Time Lapse
Menu.
To take the series of Photos, press the Start/Sto /Select Button. The camera
starts to countdown and emits a beep every time a picture is taken. To stop
the process, simply press the Start/Sto /Select Button again.
