Ultra Z Series User manual

UF65440
UF65443
UF65445
UF65440
UF65443
UF65445
Z Series
Roman Tub with Hand Shower
Installation/Installation/Instalación
CUSTOMER SERVICE
TOLL-FREE 1-888-OK-ULTRA (658-5872)
Tools You Will Need / Outils dont vous aurez besoin/ Herramientas necesarias
Replacement Parts / Pièces de rechange / Repuestos
SAFETY TIPS
•If you use soldering for the installation of the faucet, the seats, cartridges and washers will have to be removed
before using flame. Otherwise, warranty will be void on those parts.
•Cover your drain to avoid losing parts.
•0℃~55℃.
CONSIGNES DE SÉCURITÉ
•Si vous posez le robinet par brasage, il est essentiel de retirer les sièges, les cartouches et les rondelles avant
d’appliquer la flamme, faute de quoi la garantie sur ces pièces sera annulée.
•Couvrez le drain pour ne pas perdre des pièces.
•0℃~55℃.
CONSEJOS DE SEGURIDAD
•En el caso de utilizar soldadurapara instalar el grifo, remueva los asientos, cartuchos y arandelasantes de usar la
llama. De lo contrario, se anulará la garantíapara esos componentes.
•Tape la boca del desagüe para prevenir la pérdidade piezas pequeñas.
•0℃~55℃.
Adjustable Wrench
Clé à molette
Llave ajustable
Phillips Screwdriver
Tournevis cruciforme
Destornillador cruciforme
Groove join pliers
Pince multiprise
Pinzas ajustables
Limited Lifetime Warranty
Ultra Faucets warrants to the original purchaser that its products will be free from defects in workmanship and materials. All Ultra
Faucets are provided with a life time limited warranty. This warranty does not cover any other labor or service charges associated with
the removal, repair, or reinstallation of Ultra Faucets products. This express warranty does not apply to products that have been
damaged as a result of misuse, abuse, negligence, accident, faulty installation or maintenance practices and/or used in any manner
contrary to those recommended by the manufacturer.
Need help? Please call our toll-free customer service line at 1-888-658-5872 for additional assistance or service.
Besoin d’aide? Veuillez communiquer avec notre service à la clientèle au numéro gratuit 1-888-658-5872 pour tous renseignements
ou services complémentaires.
¿Requiere asistencia? Llame a nuestro Servicio al Cliente, sin costo, al 1-888-658-5872para asistencia adicional o servicio.
9Q224800CP/AP/HAHandle Base Assembly5
9Q224900CP/AP/HABase Assembly6
5E0M0115PLAerator7
9Q225200CP/AP/HABase Assembly8
9Q225100CP/AP/HAShower Base Assembly9
5C0001500CP0Handle3
9Q224700PLBush &Screw Assembly4
9Q1350NTDeck Spout Set Screw & Allen Key2
5F0001400CP0Hand Shower10
9Q1349NTHand Shower Set Screw & Allen Key11
Part No.DescriptionNO.
9Q225000CP/AP/HADiverter Knob & Rod Assembly1
1
2
3
4
5
6 7
8
9
1011

UF65440
UF65443
UF65445
UF65440
UF65443
UF65445
Installation/Installation/Instalación
123
5 6
Turn the water supply off and remove
the mud guards.
Remove the plastic cover.
8
Place the spout washer under the
spout and install spout on spout
nipple-diverter assembly. Be sure the
spout is firmly resting on the deck.
Secure the spout with the setscrew.
Insert diverter knob and rod assembly
into the spout and thread the
assembly onto the diverter rod in the
spout diverter assembly. Pull the
diverter rod and knob up and down to
test the connection.
Place the washer over the hot valve.
Align the handle and place the
handle and escutcheon assembly into
the valve. Secure the assembly by
turning the escutcheon clockwise.
Repeat for cold valve.
Remove the aerator with tool. Turn
the water supply on.
11
Attach the hand shower to the black
nylon or finished hose.
7
Pull black nylon or finished hose
through the hand shower nipple
bracket. Slide the hand shower
washer, bracket and hose guide over
the hose. Secure the assembly with
the setscrew. Note, make sure the
hose does not slip under the deck.
9
Make sure the diverter knob is in the
down position. Turn the faucet
handles on full for one minute to flush
debris.
10
Leaving the water on, pull the hose to
its farthest extension and point it into
the tub. Pull the diverter knob to its
top position. Flush the debris for one
minute. Turn off the valves.
4
Insert the bush and screw into the
hot valve. Secure the assembly by
turning the screw clockwise. Repeat
for cold valve.
12
Re-install the aerator with tool.
13
Installation complete.