UNEEKOR EYE MINI User manual

USER MANUAL
Important: Read before using.

EYE MINI USER MANUAL
We received your feedback and engineered the most innovative, versatile,
and accurate portable launch monitor to guide you on your way to master
your passion. For those looking to use the EYE MINI on the range or take
your simulation room to the next level, the EYE MINI is there to help you
analyze and improve every aspect of your golf game.
The EYE MINI user manual is designed to assist you in better
understanding your launch monitor, different set-up methods,
installation, operation, and proper storage.
GOLF YOUR WAY
THANK YOU FOR SUPPORTING THE EYE MINI

What’s Included
License Registration
EYE MINI Overview
Get Familiar
Getting Set-Up
Aligning Your EYE MINI
Applying Club Stickers
Safety Notice
Appendix
Data
External Links
EYE MINI USER MANUAL 3
TABLE OF CONTENTS
4
5
6
11
14
19
21
23
26
26
29

EYE MINI USER MANUAL 4
EYE MINI
Rubber Stopper
Club Stickers
Power Cable Ethernet Cable Tweezers
Carrying Case with
Shoulder Strap
WHAT’S INCLUDED

EYE MINI USER MANUAL 5
License Registration
The EYE MINI requires periodic connection via internet
to validate the license. If the EYE MINI is disconnected
from the internet for a period of longer than 90 days, all
connection will be prohibited until device is connected
to internet and license is validated.
To determine when your license will expire. Please go to
MENU then LICENSE. You can check both the expiration
date and the validation remaining days.

EYE MINI Overview
EYE MINI USER MANUAL 6
Specifications
15.75”
12”
8”
Ready Zone
S
c
r
e
e
n
Page 6 Diagram - v1 - EYE-MINI Manual Diagrams
Data Points
11
Hitting Zone Dimensions
12” W x 8” L
Battery Life
5-6 hours
Placement
Portable
Space Requirements
10’ L x 13’ W x 10’ H
Marked Balls
No
Compatible Accessories
Club stickers, Swing Optix, Balance Optix
Dimensions
6.5” L x 6.6” W x 15.75”
H
Weight
7lbs 15oz

EYE MINI Overview
EYE MINI USER MANUAL 7
Front
E-Ink Screen
Displays
calibration,
options, and
shot data
Power Button
Turns the
Device On/Off
Two High-
Speed
Cameras
& Infrared
Sensors

EYE MINI Overview
EYE MINI USER MANUAL 8
Rear
Ethernet Port
Utilized to connect
to network via
ethernet cable or
connect to PC
Handle
Power Port
USB-C Port
**For Uneekor use only

EYE MINI Overview
EYE MINI USER MANUAL 9
E-Ink Display
Backlight Button
OK Button
Increases
brightness for
better viewing
Used to
select
options
Used to navigate
between settings
and shot data
Power Button
Back Button
Hold to turn
device On/Off
*Tap to wake up
from sleep mode
Return to
previous screen
Up/Down Keys

EYE MINI USER MANUAL 10
EYE MINI Overview
There are various ways to use the EYE MINI: (1) PC, (2) iPad/ iPhone/ Android,
(3) E-Ink Display.
1. PC
For when you are at home and looking to make the most of your indoor golf
simulator bay.
Download the Uneekor Launcher from …….Insert link here…. Run the installer to
install on Windows PC. Mac and Linux is not supported.
Recommended PC Specs are listed at https://uneekor.com/golf-launch-
monitors/eye-mini
2. iPad/ iPhone/ Android
For golfers looking to be versatile and take their EYE MINI indoors and outdoors
with a more immersive experience.
Search Uneekor in the App Store and install Uneekor View.
3. E-Ink Display
For golfers looking to hone-in their skills outdoors without bringing additional
hardware into the mix.
Ways to Use

EYE MINI USER MANUAL 11
Begin by pressing the power button to turn on the EYE MINI.
After powering on the EYE MINI, it will take you to the “Searching…” screen. This is the screen you
will see when the sensor is looking for a golf ball in the hitting zone when you are ready to hit.
The bottom of the screen contains DATA, PUTTING, ALIGN, and MENU.
All settings can be navigated using the up/ down keys and selected using the OK button. Settings
will auto save after exiting the screen.
This is where the ball and club data* will be displayed.
*Club Stickers Needed*
Display of data can be changed to one or two pages
in settings. Two-page data rotation can be changed
to manual or automatic every 2 or 5 seconds. Under
settings you can change what data is displayed on
the EYE MINI screen. Default setting is to display Ball/
Club Data.
Data that is displayed can be changed to Distance/
Direction to view data oriented to the distance and
direction of the ball ight.
Please note: when using Distance/Direction display,
data will be displayed on seperate pages. Select
the DIST or DIR button on the bottom left to change
between the two.
DATA
POWER ON
Get Familiar

EYE MINI USER MANUAL 12
The putting tab is to be selected when putting. When putting mode is turned on you’ll see a dark “P”
at the top left of the display next to the “RH”.
PUTTING
Calibrating/ aligning your EYE MINI to
the target is done here and can also
be completed by going to MENU then
Target Alignment. Select “Align” at the
bottom of the display, then start. Align
two balls 10”- 20” apart pointed at your
target (*Ensure that target is within
10 degrees of where the EYE MINI is
aimed). Make sure there is a check mark
above the two balls on the EYE MINI
display, then click “APPLY.”
This is another place you can align/
calibrate the EYE MINI to the target.
On page 1 under the settings option you
can change between left- and right-handed
golfers. Switch the distance measurement
from yards to meters. Change the speed
metrics from mph, m/s, km/h, yd/s. Display
mode from one page, distance/ Direction,
Ball/ Club. Display rotation can be changed
from Manual, or auto rotation every 2 or 5
seconds.
On page 2, you can turn putting mode
on or off. Change the elevation from
automatic conguration to a preset elevation
depending on your geographic location. Auto
sleep, auto shutdown, and auto upgrade can
all be turned off here.
On page 3, you can toggle the ethernet type
between Dynamic or Static depending on
your conguration at home. This is where the
WIFI is congured on/off.
ALIGN MENU
Target Alignment
Settings
Get Familiar
Page 12 Diagram - EYE-MINI Manual Diagrams

EYE MINI USER MANUAL 13
Get Familiar
Device: you will nd your EYE MINI
Serial Number, Region, Wi-Fi SSID, and
Wi-Fi Password.
License section: you can see your
account email, region, level, license
expiration date, and how many days are
left on the current license.
Notice: you’ll nd the EYE MINI safety
warning.
Device: gives you the product and brand
name.
Gives you the status of the Battery
life, WiFi, WiFi IP Address, Ethernet,
Ethernet IP Address.
Status
Current software version and new
updates can be found here.
Updates
*Be careful to not power off device during updates
Go here to nd contact information for
Uneekor Support Team.
Help
About

Getting Set-Up
Connecting the EYE MINI to the internet
For the initial set up, Uneekor strongly recommends
connecting the EYE MINI to a PC using the ethernet
cable provided directly connected to your PC.
Ethernet- Direct to PC
To connect your EYE MINI with PC, connect the ethernet cable from the PC to the back of
the EYE MINI. Ensure the Ethernet option under settings on the EYE MINI is set to “STATIC.”
Once ethernet is connected to EYE MINI and PC, you will see your launch monitor under the
DEVICES tab in the Uneekor Launcher.
When connecting using this method, in the Uneekor Launcher under devices, make sure
ethernet is selected, then click “connect”.
*EYE MINI is connected to the internet through WiFi for system update and license check
*PC and EYE MINI are connected directly for data communication
EYE MINI USER MANUAL 14
Page 14 Diagram 2 - EYE-MINI Manual Diagrams
EYE MINI
Static IP
PC
Static IP
172.16.1.100
Internet
Page 14 Diagram 1 - EYE-MINI Manual Diagrams
*Not sure about this computer graphic...
we could buy a stock image or I can
make one if we want to replace it
Internet Connection

Getting Set-Up
Ethernet- Router/ Switch
It is possible to connect your EYE MINI to the internet by connecting the
ethernet cable directly into your router or network switch. To connect the EYE
MINI this way, please connect the ethernet cable provided from the back of
the EYE MINI to the LAN port on your router or network switch. Under settings
change ethernet type to “Dynamic”.
*PC and EYE MINI are connected through the ethernet switch.
EYE MINI USER MANUAL 15
Page 15 Diagram - EYE-MINI Manual Diagrams
Internet
EYE MINI
Dynamic (DHCP)
PC
Dynamic (DHCP)
Internet Connection
Cont.

EYE MINI USER MANUAL 16
Getting Set-Up
1. Make sure you have the Uneekor Launcher downloaded on your PC.
The Launcher can be found under the resources section of Uneekor.com
or click on the link below to download.
….LINK…….
2. Once the launcher is installed, create a myUneekor account.
…..Link Myuneekor.com/
For any assistance using the Uneekor Launcher, please see here.
My uneekor guide here….
3. *When connecting the internet connection directly from your PC to
your EYE MINI, go to devices in the launcher and make sure ethernet is
selected in the drop down and click “Select”
PC Software Installation
4. Open the Uneekor Launcher on your PC and go to the “Install” tab on
the left-hand side and select EYE MINI, then continue.
Follow the step-by-step instructions on the Launcher Window to set
up your EYE MINI. During this installation process your EYE MINI will be
registered and all the necessary software will be downloaded.

EYE MINI USER MANUAL 17
iPad/iPhone View App
If you have not already registered the EYE MINI above with your PC
and would like to only use an iPad/iPhone, please see below.
On the main screen of the EYE MINI, select “MENU”. On the left-hand
side of the MENU screen, you’ll see a QR Code.
Open your camera on your iPad/iPhone and hover over the QR Code.
On your iPad screen tap, “Join EYE MINI - .....” Network.
Open settings on your iPad, navigate to WiFi and you should see you
are connected to “EYE MINI - ......”
(*WiFi password for all EYE MINI Launch Monitors is “EYE_MINI”*)

EYE MINI USER MANUAL 18
iPad/iPhone View App
1. Open the Uneekor Launcher and navigate to the “Devices” tab on
the left side. After your EYE MINI and iPad/iPhone is connected to the
network, you should see your EYE MINI at the bottom of this screen.
2. Click Register
3. Once EYE MINI is connected to an iPad/iPhone and has been
registed on the Uneekor Launcher with your myUneekor account,
download the View application from the App Store.
4. ****Link to VIEW app Here
5. Open the View app on your iPhone or iPad. Click the home button
on the top left. In the pop up you’ll see your EYE MINI. Select your EYE
MINI
*Within 90-days you’ll need to download and connect the EYE
App to register your license periodically*

EYE MINI USER MANUAL 19
Ensure EYE MINI is placed on a level surface. If placed on an
angle, the ball will y at the angle it is tilted to.
Ensure EYE MINI is placed on even height surface as hitting area.
Mat
CAUTION
Aligning Your EYE MINI
WARNING