Unilux LOLA User manual

LOLA
LOLA Bluetooth speaker is a multi-functional digital device combined microphone, USB charger, FM radio,
Micro SD card reader, AUX, all in one.
3.0 Bluetooth module can be compatible to mobile phone, computer and most of the Bluetooth set devices.
General informations
Rated Output Power: 2 x 3W RMS
Input : DC 5V
Bluetooth standard: 3.0
Transmission distance: 10m (free space)
Built-in lithium battery: 5V / 1200 mAh
Time to charge : 2 hours
Play time: 5 hours
Good to know:
Charging time may vary based on the devic’s battery
capacity, charge level, the age of the battery and the
temperature in the surrounding area.
Charge storage temperature: -20°C to 25°C
Charger operating temperature: 0°C to 40°C
To clean the speaker, wipe with a moist cloth. Never
submerge the charger in water.
Only charge devices that are compatible with the USB
charger.
Only use in dry location.
Children should be supervised to ensure they do not play with
the product.
PARING
Turn on the product or press M button to go to Bluetooth mode.
Turn on the Bluetooth function on your phone, search the Bluetooth file named “S207U”, click to connect.
The speaker voice prompt connection is successful after matched, and the green light is normally ON, then
you can play the music or use the Bluetooth phone function after successful connection.
For customer support or information please contact us on our website www.my-unilux.com, rubric “Customer support”.
Edition du 28 Nov. 2017

1
3
1ON –OFF Button
M : mode selection
from Bluetooth to FM radio, AUX to Micro SD card (after switching ON speaker)
In FM radio mode, please connect the 3,5mm cable to LINE IN as antenna
Single press: selection of next or previous song in Bluetooth mode, in Radio mode selection of the channel
Long press : adjust volume
Stop/Play button, Bluetooth answer button. After connecting to Bluetooth, single press to answer or cut the
call after finishing talk via this button.
Under FM mode, single press to search the channel and keep them automatically
LINE IN (AUX)
Connect an audio input cable with a 3.5 mm connector
on both ends to the LINE IN socket on this speaker,
and the headphone socket on the external device.
DC INPUT: connecting to DC IN, USB cable to recharge the built-in battery
Red LED is ON during charge.
TF CARD
Connect a Micro SD card to read the music inside.
USB hub
LOLA can be used as battery power bank. Connect the device to the USB slot for recharge.
Charge is activated when speaker is ON.
2
2
3
3
4
4
5
6
7
AUX
8