Uniq UNIQfunky User manual

UNIQfunky
Wireless Speaker
USER GUIDE
For correctly operang, please read this User Guide carefully before
using. Any content revise of the manual won’t declare again and we
are not responsible for consequences caused by fault or oversight of
this manual.
Features
1. 2.0CH charming Boombox of RGB Lighng;
2. Output very clear sound and dynamic sound eect;
3. Wireless version 5.0 , wireless stream music from any Wireless-enabled device such
as your mobile phone ;
4. Secure simple pairing for user-friendly operang;
5. 10 meters operang range(without obstacles);
6. With USB and TF card supporng;
7. With FM radio;
8. With Line-in funcon(AUX-IN),suitable for PC,MID,TV and other audio device;
9. With TWS funcon,1 Wireless connecon to 2 same speakers at the same me,
enjoy the stereo eect;
10. Built-in lithium rechargeable baery 3000mAh;
11. With handle, easy to take out.
Specification
Product size: 341 (L) *125(W) * 164 (H) mm
Wireless version: 5.0; Support A2DP and AVRCP prole
Wireless range: up to 10 meters(without obstacles)
Speaker: Tweeter size: 2.75”*2; Tweeter output: 8.5W*2, 4Ω
Connecons: USB and Aux-in 3.5mm jack connecon
Power supply: Built-in rechargeable lithium baery 3000mAh
(2 hours playme with max volume and RGB Light )
Recharge power: DC 5V 1A (USB-to-micro USB charging cable included)
Frequency Response: 80Hz-12KHz

Control Panel
1. TF card slot
2. USB Port
3. Charging Port
4. AUX-in Jack
5. Baery Indicator
6. Forward(Short press)/ Volume down( Long press)
7. Backward(Short press)/ Volume up( Long press)
8. Play/Pause
9. Mode (Switch Wireless, USB, TF card, FM radio and AUX-IN state)
10. TWS Buon(Long press)
11. Power buon
Bluetooth function
1. Short press “Power buon”to open the power supplyto open the power supplyto
open the power supply, The Power buon turn blue and twinkle quickly, then
enter Wireless mode and make a tone “Wireless Device Ready To Pair”.
2. Acvate Wireless of mobile phone and search for device name “UNIQFunky”
then connect it. The power buon stop twinkling and make a tone “Wireless
Device Connected Successfully once connected.
3. Play the music from your mobile phone and enjoy.
4. Short Press “Forward” or “Backward” buon on the device or on Mobile phones
to select songs you like.
5. Short Press “Play/Pause” buon on the device or on Mobile phones to Play/
Pause the music.
6. Long press “Forward”or “Backward” buon to adjust volume up and down. Or
adjust the mobile phones’ volume.
7. Long press “Play/Pause” buon to acvate Mobile phone voice control funcon
SIRI/GOOGLE ASSISTANT;
FM Radio

1. Under FM radio state, the audio cable provided treat as antenna. Please Insert
the Audio Cable to get best FM signal before using.
2. Short press “Power “buo to open the power supply, press the “M” buon, the
speaker will prompt “The Radio Mode” when entering FM state.
3. Under playing mode, short press “”Play/Pause”” buon to auto search the FM
Channel and store it automacally.
4. Press “Forward”or “Backward” buon to change the stored FM channel.
AUX-IN
1. For other compable music devices or your MP3/MP4 players, use the supplied
Audio cable to connect from the device’s “Line Out” to the “Aux In” of this
device. Then press the “M” buon, the speaker will prompt “Aux Input Mode”,
then Enjoy…
2. When using an external device, all funcons can be controlled by the external
device.
TWS Function
1. Turn on two idencal speakers you want to pair, please noted they must be the
same BT paring name, both under BT mode. Only need to set one of the two
units;
2. Press the “TWS” buon, speaker will make a tone “di” to start to pair, it will make
“di” 3 mes and TWS buon will keep lighng aer paired successfully;
3. Make Wireless connecon with your mobile phone to play music by the two
paired Speakers to create more powerful surround sound eect.
4. When you want to exit the TWS mode, press “TWS” buon (of the unit you set at
beginning) again to exit the TWS funcon.
Playing music from USB disk & TF card
1. Short press “Power buon”to open the power supply.
2. Insert TF card or USB ash disk into slot, the speaker will make a tone “Music
Play Mode”, and play the stored music automacally.
3. Under playing mode, short press “Forward”or “Backward” buon to select songs
you like, long press to adjust the volume up and down.
4. Short Press “Play/Pause” to play or pause.
Remark: Under Wireless playing mode, insert TF card or USB will disconnect the Wireless and switch to
play the USB or TF card. You can press the MODE buon to switch to Wireless mode again.
remarks
1. When Wireless connecon with iPhone mobile, there will be a baery icon
indicang the speaker baery volume on your iPhone.
2. Short Press the “M” buon to switch the dierent modes, the order is Wireless,
USB disk, SD card, FM radio and AUX-IN.
3. When the speaker Wireless connected with one mobile device, user can long
press the TWS buon to disconnect the previous device, then make Wireless
connecon with another mobile device;

4. Default volume is at 50% Speaker of max volume;
5. Long press “M” buon to turn the RGB on/o;
6. When baery voltage low, the speaker will prompt “Baery Is Low, Please
Recharge In Time”;
7. Long press “Power buon”to turn o the power,while without use.
how to charge
1. The charger is not included in the accessories. Please use the Universal 5V/1A
charger to charge this device, and we are not responsible for any damage caused
by using other charger.
2. Power o the unit, put the provided charge cable into the charge slot of unit,
connect the other end to PC or other charger with 5V output.
3. Charge me should about 4.5 hours. The light is red while charging, and the
indicator light will switch o when full charged.(When playing music during
charging, please put the volume to middle, because for some music with heavy
bass, the charger may not be able to aord the high current temporarily under the
maximum volume.)
4. In order to prolong the life of baery, please do not charge more than 8 hours.
Accessories
Adapter, charging cable, audio cable, USER GUIDE
For more informaon about UNIQberlin (EAN: 8719273158005), please contact UNIQ
Accessory using the following contact informaon:
Model: UNIQfunky
EAN: 8719273158005
Email: [e-mail]
Web: uniqaccessory.com
Address: Innsbruckweg 46, 3047AH Roerdam, The Netherlands
-------------------------------------------------- WARRANTY FORM -----------------------------------------
Your full name: ……………………………… ………………………………
Reason: ………………………………………………………….......
Product EAN: ………………………………
Model: ………………………………
Purchase Date: ………………………………