UPPER90 54515 Reference guide

54515—Aluminum Futsal Goal
Customer Instructions
www.upper90goals.com
[phone]
02/26/2016
INST54515
Copyright © 2016 by Litania Sports Group, Inc.
All rights reserved.
Unwrap and lay out all parts before starting the assembly.
A
A
B B
CC
EE
FF
FF
D D
F
B
C
A
D
E

Assemble the left and right base corners
Large tapped 4 hole plate
(for left rear wheel)
Insert two small tapped 2 hole plate
(for rear back stay connection)
Use large tapped plate,
clamp plate and four short
screws, lock washers and
flat washers.
F
A
C

Insert large tapped plate and clamping
plate to splice side base tubes and up-
right corners. Attach a left wheel to the
tapped plate using four large screws,
lock washers and flat washers.
E
C
Add clamping plate and
attach a left wheel to the
tapped plate using four
large screws, lock wash-
ers and flat washers.

E
B
Use large tapped plate,
clamp plate and four short
screws, lock washers and
flat washers to attach the
uprights.
Insert large tapping plate

F
Slide the two small 2
hole clamping plates
down
Assemble the upper crossbar.
Use upper crossbar corners and crossbar tube.
Attach them using one large tapped plate, a clamp-
ing plate and four short screws, lock washers and
flat washers (at each corner).
FA

D
Place crossbar assembly
onto uprights.
Backstay plate needs to be
centered over splice line.
Attach lower backstay portion to the
two small tapped plates using four
large screws, lock washers and flat
washer.

Slide one of the two small tapped plates up to
the crossbar corner. Hold it in place using a
narrow object. Use two large screws, lock
washers and flat washers to bolt the top por-
tion of the backstay to the corner. Slide the
second small tapped plate up and fasten it the
same way. Repeat on the other side.

Attach the net using the plastic net
clips as shown.
WARNING: This product can expose you to Titanium Dioxide,
which is known to the State of California to cause cancer.
For more information go to www.p65warnings.ca.gov.
E