UPS IUPS-401-110-B7 User manual

IUPS-401-110-B7
400 VA
Integrated UPS
Communication interface
Reboot function
For PC tower installation
Easy handling and installing
Inclusive Software
Output power 400 VA / 240 W
Input voltage 110 V AC ±15 %
Input frequency 50 / 60 Hz ±5 %
Output voltage 110 V AC ±15 %
Output frequency 50 / 60 Hz ±1 %
Charging time App. 8 h (90 % load)
UPS Classification / Wave form VFD / rectangular
Protection Overload protection UPS mode: 100…120 %, alarm / 120…190 %, switch off
Overload protection mains mode: fuse
Overtemperature protection: switch off
Transfer time <6 ms
Back up time 100 W / 166 VA load app. 5 minutes
180 W / 300 VA load app. 2…3 minutes
Interface See table „Model overview“
Temperature Operating: 0…+40 °C / Storage: 0…+40 °C
Humidity Operating: 10…85% RH, non-condensing / Storage: 10…90% RH, non-condensing
Dimensions (W x D x H) 146 x 253 x 42 mm ±0.5 mm
Weight (net) 2.75 kg
Product specific data
Transfer limit in mains / UPS mode 92 V AC ±5 %
Transfer limit into UPS mode 126 V AC ±5 %
in case of overvoltage at the input
Type of battery 2 x 6 V / 3 Ah, maintenance-free lead-gel batteries (VRLA)
Load sensor Switch off threshold see table „Model overview“
UPS management software see table „Model overview“
Reboot function see table „Model overview“
Button To switch off alarm sound: Press for app. 1 second
To switch off UPS: Press for app. 4 seconds
To switch on UPS (cold start, without
mains supply): Press for app. 2 seconds
The service life of the batteries is app. 4…5 years at +20 °C and will decrease by half with each temperature
increase of 10 °C according to EUROBAT. During storage the UPS has to be charged at least every 6 months.
Bicker Elektronik GmbH | 86609 Donauwörth | Germany
Tel. [phone] | [e-mail] |www.bicker.de
UPS systems
AC UPS
Technical data
Black font panel
incl. in delivery
Delivery
5
YEARS
Delivery
5
YEARS
Fanless
Fanless Eco
Eco
Button

Bicker Elektronik GmbH | 86609 Donauwörth | Germany
Tel. [phone] | [e-mail] |www.bicker.de
UPS systems
AC UPS
Status display and alarm
Status display Alarm Alarm sound detachable LED
Normal UPS mode – green
Battery charge (mains mode) – green flashing
UPS battery mode 2 beep sounds every 3 seconds yes red flashing
UPS battery mode (Battery low) 4 beep sounds a second no red flashing (quickly)
Overload (Normal mode) Continuous sound no red
Internal UPS failure 8 beep sounds per 2 sec., 2 sec. stillness no red flashing (quickly)
Overtemperature 8 beep sounds per 2 sec., 2 sec. stillness yes red flashing (quickly)
Battery defect – red flashing (quickly)
Model overview
Article Interface Load sensor UPS management software Reboot function
No. switch off
IUPS-401-110-B7 SERIAL (D-SUB) 33 W* If mains voltage returns after a power failure
while Windows® is already shutting down,
the UPS switches the PC off (after the shut-
down period) and switches it on again after
approximately 5 seconds in conjunction with
RUPS 2000 and an ACPI-PC.
Please observe BIOS settings of mainboard.
RUPS 2000 OEM, UPS management
software included in delivery.
* Tolerance of switch-o threshold ≤3 %
For futher information please visit our website www.bicker.de and refer to the article number.

Windows® is a registered trademark of Microsoft Corp., NetWare® is a registered trademark of Novell. Specification is subject to change without notice. Errors excepted. Windows® is a trademark of Microsoft Inc. Status as at: 04.07.2017
Bicker Elektronik GmbH | 86609 Donauwörth | Germany
Tel. [phone] | [e-mail] |www.bicker.de
UPS systems
AC UPS
Drawing IUPS-401-110-B7
Tolerance ±0.5 mm