US Fleet Tracking CloudSat3 Solar Specification sheet

CloudSat3 Solar
Get Started
MOUNTING
• Mount the CloudSat3 Solar device on the top
side (recommended) of the asset/equipment
with a clear view of the sky and access to a
direct light source.
• Secure the device by installing screws into the
four corners of the device and attaching them to
your asset/equipment.
• An optional foam barrier with adhesive backing
is included for a more secure installation.
Need assistance? Call our technical support
team at 405.726.9900, opt. 3.
CSSv1.3
405.726.9900 | www.usfleettracking.com
mounting
point

CloudSat3 Solar
Get Started
POWERING ON
• Mount the device. Refer to the other side of this
card for mounting details.
• Remove the black rubber magnetic tab located
on the top of the device opposite of the solar
panel. Retain this tab should you ever need to
store the device for long periods of time.
• Once the black rubber magnetic tab is removed,
the device will transmit a “power on” update
within five minutes and initiate the device’s
update sequence according to your rate plan.
Need assistance? Call our technical support
team at 405.726.9900, opt. 3.
CSSv1.3
405.726.9900 | www.usfleettracking.com
,p
rubber
tab