US Robotics USR997903 User manual

Gigabit Ethernet CardBus NIC
Quick Installation Guide
Guide d'installation rapide
Installationsanleitung
Guida per l'installazione rapida
Beknopteinstallatiegids
Guía breve de instalación
Manual de Instalação Rápida
Οδηγός γρήγορης εγκατάστασης
Краткое руководство по установке
Snabbinstallationsguide
Příručka pro rychlou instalaci
Gyorstelepítési útmutató
Instrukcja szybkiej instalacji
Hızlı Kurulum Kılavuzu
R24.0513.00rev 4 03/
2005
R24.0529.00
rev 0 04/2005

Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Installazione . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Instalación . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Installatie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Instalação. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Εγκατάσταση . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Установка . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Instalace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Telepítés . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Instalacja . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Kurulum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199

3
Installation
Package Contents
Before You Begin
If you use Windows Me or 98, you may need your operating system installa-
tion CD-ROM to complete the installation procedure.
For the most current installation instructions, visit www.usr.com/support
Step One: Install the software
1. Insert the U.S. Robotics Installation CD-ROM into your CD-ROM drive.
2. Select your preferred language, then review the License Agreement
and click Yes.
3. Select Installation.
4. When the installation wizard appears, click Next.
5. Click Next; click Next again.
If you see a prompt regarding Windows Logo testing, click Continue
Anyway.*If a Digital Signature Not Found window appears, click Yes.*
6. Wait while the wizard installs the software, then click Finish.
* U.S. Robotics has thoroughly tested this driver in conjunction with the supported hardware and
has verified compatibility with Windows XP, Me, and 2000.
Quick Installation Guide
(this guide)
Gigabit Ethernet
CardBus NIC Installation CD-ROM

4
Step Two: Install the Hardware
1. Insert your new PC Card firmly
into an available PCMCIA slot.
2. Insert one end of an RJ-45 Eth-
ernet cable into the port on the
PC Card and the other into a
LAN Ethernet port on your net-
work connection device.
Windows XP
1. If the Found New Hardware Wizard displays a welcome screen, select
No, not this time and click Next.
2. Select Install the software automatically (Recommended) ; click Next .
If you receive a prompt regarding WIndows Logo testing, click Con-
tinue Anyway.**
3. Wait for the operating system to copy the files that it needs, then click
Finish.
Windows Me
The operating system starts the new hardware installation automatically.
If the Found New Hardware Wizard requests your Windows Me CD-ROM,
1. Remove the U.S. Robotics Installation CD-ROM.
2. Insert the operating system installation CD-ROM.
3. In the following command, D represents your CD-ROM drive letter. If
your drive uses a different letter, be sure to type that letter instead of
D. Type D:\ winMe and click OK.
** U.S. Robotics has thoroughly tested this driver in conjunction with the supported hardware and
has verified compatibility with Windows XP.

5
4. Wait for the operating system to copy the files that it needs. When the
Found New Hardware Wizard closes, remove the operating system
installation CD-ROM.
If you are prompted to restart your computer click Yes.
5. Re-insert the U.S. Robotics Installation CD-ROM so that you can com-
plete the setup program.
Windows 2000
If a Digital Signature Not Found window appears, click Yes.*** Hardware
installation is complete when the Found New Hardware Wizard closes.
Windows 98
The operating system starts the new hardware installation automatically.
If the New Hardware Found Wizard requests your Windows 98 CD-ROM,
1. Remove the U.S. Robotics Installation CD-ROM.
2. Insert the operating system installation CD-ROM.
3. In the following command, D represents your CD-ROM drive letter. If
your drive uses a different letter, be sure to type that letter instead of
D. Type D:\ win98 and click OK.
4. Wait for the operating system to copy the files that it needs. When the
New Hardware Found window closes, remove the operating system
installation CD-ROM.
If you are prompted to restart your computer click Yes.
5. Re-insert the U.S. Robotics Installation CD-ROM so that you can com-
plete the setup program.
*** U.S. Robotics has thoroughly tested this driver in conjunction with the supported hardware and
has verified compatibility with Windows 2000.

6
Step Three: Verify Your Installation
If an LED on the PC card flashes continuously, you have successfully
installed the card. Please go to www.usr.com/productreg to register your
new Gigabit Ethernet CardBus NIC.
Troubleshooting
I inserted the PC card, but I can’t get it to install properly.
Possible Solution:
The recommended installation procedure is to install the software first,
without having the PC card in the laptop. Remove the PC card from the lap-
top and follow the instructions in the “Installation” section of this guide.
The U.S. Robotics interface did not begin when I inserted
the Installation CD-ROM.
Possible Solution:
Another program may have disabled the autorun feature of Windows. Close
all open applications and re-insert the Installation CD-ROM. If the U.S.
Robotics interface does not appear automatically, click Windows Start and
then click Run. In the Run dialogue box, type D:\setup.exe (if your CD-ROM
drive uses a different letter, type that letter instead of “D” ).
Congratulations! The installation procedure is complete!

7
I accidentally clicked Cancel during the software instal-
lation.
Possible Solution:
Simply restart the software installation process by clicking Installation on
the U.S. Robotics interface.
My computer is not recognising my new PC Card.
Possible Solution 1:
Make sure that the PC card is seated in the PCMCIA slot securely. Check for
hardware problems, such as physical damage to the card’s edge connector.
Try the card in another PCMCIA slot.
Possible Solution 2:
Another network adapter in your computer may be causing a conflict. Unin-
stall and remove the other adapter, then test the new PC card separately.
Are You Still Having Problems?
1. Go to the Support section of the U.S Robotics Web site at
www.usr.com
Many of the most common difficulties that users experience have
been addressed in the FAQ and Troubleshooting Web pages for your
product. The product number of the Gigabit Ethernet CardBus NIC is
7903. You may need to know this to obtain information on the U.S.
Robotics Web site.
2. Submit your technical support question using an online form at
www.usr.com/emailsupport

8
3. Contact the U.S. Robotics Technical Support Department. To receive
assistance, you need your serial number, which is located on the PC
card’s label and box. Write the number in the space below.
For current support contact information, go to www.usr.com/support
Product Number Serial Number
7903
Country Voice Webmail Support Hours
United States [phone] www.usr.com/emailsupport 9:00 A.M. - 6:00 P.M., M-F Central
Canada [phone] www.usr.com/emailsupport 9:00 A.M. - 6:00 P.M., M-F Central
Austria 07 110 900 116 www.usr.com/emailsupport/de 9:00A.M.–17:00P.M.,M-F
Belgium (Flemish) [phone] www.usr.com/emailsupport/ea 9:00A.M.–17:00P.M.,M-F
Belgium (French) [phone] www.usr.com/emailsupport/ea 9:00A.M.–17:00P.M.,M-F
Denmark [phone] www.usr.com/emailsupport/uk 9:00A.M.–17:00P.M.,M-F
Finland [phone] www.usr.com/emailsupport/ea 10:00A.M.–18:00P.M.,M-F
France 082 507 0693 www.usr.com/emailsupport/fr 9:00A.M.–17:00P.M.,M-F
Germany 01805671548 www.usr.com/emailsupport/de 9:00A.M.–17:00P.M.,M-F
Hungary 01805671548 www.usr.com/emailsupport/hu 9:00A.M.–17:00P.M.,M-F
Ireland [phone] www.usr.com/emailsupport/uk 9:00A.M.–18:00P.M.,M-F
Italy 848 80 9903 www.usr.com/emailsupport/it 9:00A.M.–17:00P.M.,M-F
Luxembourg [phone] www.usr.com/emailsupport/bn 9:00A.M.–17:00P.M.,M-F
Middle East/Africa [phone] www.usr.com/emailsupport/me 9:00A.M.–17:00P.M.,M-F
Netherlands 0900 20 25 857 www.usr.com/emailsupport/ea 9:00A.M.–17:00P.M.,M-F
Norway [phone] www.usr.com/emailsupport/ea 9:00A.M.–17:00P.M.,M-F
Poland www.usr.com/emailsupport/pl 8:00A.M.–18:00P.M.,M-F
Portugal [phone]www.usr.com/emailsupport/pt 9:00A.M.–17:00P.M.,M-F
Spain 902 117 964 www.usr.com/emailsupport/es 9:00A.M.–17:00P.M.,M-F
Sweden [phone] www.usr.com/emailsupport/ea 9:00A.M.–17:00P.M.,M-F
Switzerland +0848 840 200 www.usr.com/emailsupport/de 9:00A.M.–17:00P.M.,M-F
UK 0870 844 4546 www.usr.com/emailsupport/uk 9:00A.M.–17:00P.M.,M-F