USAPRO SECURITY AS62UG User manual

FACTORY KEYLESS ENTRY UPGRADE
SECURITY SYSTEM
USER MANUAL
AS62UG

This vehicle security system is warranted to the original purchaser, to be free from defects in
material and workmanship. The manufacturer will repair or replace at its option, and free of
charge for the first twelve (12) months, any part that proves defective in material or workmanship
under normal installation, use, and service, provided the product is returned to the manufacturer
freight prepaid. After the first 12 month warranty period there will be a maximum service charge
of $25.00 per calendar year (if required) for repair and/or replacement of any defective parts.
A copy of the original purchase receipt must accompany any products returned for warranty
service. Warranty is limited to defective parts and/or replacement parts only and excludes any
incidental, and consequential damages connected therewith.
The manufacturer of this theft deterrent system makes no warranty against the theft of the vehicle
or its contents. This warranty is not to be construed as an insurance policy against loss.
WARRANTY OF INSTALLATION LABOR, REMOVAL AND RE-INSTALLATION CHARGES ARE
NOT THE RESPONSIBILITY OF THE MANUFACTURER.
1. Factory Upgrade Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 5
Arming Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 5
Disarming Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 5
Tamper Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6
Silent Arming/Disarming. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 6
Passive Arming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . ..Page 6
Emergency Override . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 7
Optional Coded Emergency Override. . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7
Valet Mode .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . Page 7
Remote Sensor Disable . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . Page 7
Ignition Controlled Lock/Unlock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 7
2. Technical Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Page
3. Company Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Page
Limited Lifetime Warranty
Table of Contents

Remote Arming
Note: This system does not improve or affect the operating range of the Factory Keyless Entry
Remote Transmitters. This is an ADD-ON system only. The Arm/Disarm range will be the same as
the Factory’s Lock/Unlock range.
To Arm the System:
1. Turn off the ignition, exit the vehicle and close all entry points.
2. Press the Lock Button on the Factory Remote.
(locking the door with the key may also arm the system on some vehicles).
· The horn will honk once.*
· The doors will lock.
· The parking lights will flash once.
· The LED will turn On to indicate the starter defeat is activated.
3. 5 seconds after Arming:
·The LED will start blinking to indicate that the doors and hood/trunk inputs are being
monitored.
(The system monitors 4 independent areas (
zones
) while armed: doors,trunk, shock
sensor and optional sensor inputs).
* During Arming, if the system detects a bad sensor or an open zone, the system will honk 4 additional
times and ignore that input, but keep all other areas protected.
Once Armed, the alarm will trigger when any of the following occurs:
·The doors are opened.
·The hood or trunk is opened.
·The shock sensor detects an impact to the vehicle.
·The optional sensor is disturbed.
When the alarm triggers, the horn will honk, and the parking lights will flash. If the system
is triggered by the doors, or hood/trunk, the system will alarm for 45 seconds. If triggered
by the shock sensor or optional sensor input, the system will alarm for 30 seconds.
In the event the alarm is triggered and remains triggered continuously by the same sensor
or input during a single arming cycle, that sensor or input will be automatically bypassed
until the next time the system is armed.
If the Shock Sensor detects a light impact to the vehicle, or the Optional Sensor’s warn-
away zone is disturbed, the Horn will Honk 5 times as a warning indication.
Remote Disarming
To Disarm the System:
Press the Unlock Button on the Factory Remote.
(unlocking the driver’s door “twice” with the key may also disarm the system).
· The horn will honk twice.*
· The doors will unlock.
· The parking lights will flash twice.
· The LED will turn off.
* During Disarming, if the system was triggered while away from the vehicle, the horn will honk 3 times, the parking
lights will flash 3 times, and the LED will flash to indicate triggered zone. See
Tamper Alert
for zone listing.
Factory Upgrade Operation

Tamper Alert
If the system was triggered while away, the LEDwill flash to indicate which zone triggered the
system after disarming and turning on the ignition. The LEDindication will repeat 8 times.
LED Flashes:
1 flash = optional sensor
2 flashes = shock sensor
3 flashes = not used
4 flashes = door
5 flashes = trunk
10 flashes = main power interrupt or system was reset
example: flash-flash-pause-flash-flash-pause = shock sensor
Silent Arming/Disarming
The system can be programmed to operate without Arm and Disarm Horn Honk indications.
When programmed for full-time silent operation, the siren will sound only when the system is
triggered.
Note: The open zone warning chirps will not be bypassed when the system is Armed or Disarmed silently.
Passive Arming
When programmed for the optional Passive Arming feature, the system arms itself automatically,
each time the ignition is turned off and all of the doors, hood, and trunk are closed.
To start the Passive Arming Process:
1. Turn off the ignition.
2. Open the door and exit the vehicle.
· Once all doors are closed and the dome light is off, the LED will begin flashing rapidly.
Parking Lights will flash twice three seconds after passive arming cycle began.
3. After 30 seconds,
· The horn will honk.
· The parking lights will flash.
· The doors will lock.*
· The status LED will begin flashing.
4. The system is now armed.
*If the Passive Locking feature is selected.
Note: Some vehicles have an Automatic Feature that Re-Locks the doors 30
seconds after the system was unlocked with the Factory Remote Transmitter if
neither doors or trunk were opened.
The AS62UG will also Re-Arm at this point.
That is the vehicles factory feature that can not be disabled by the installer.

Emergency Override
If the transmitter becomes lost or inoperable, the system can still be disarmed using the following
procedure. Before beginning this procedure be sure to have the ignition key ready and know the
location of the override switch.
To Emergency Override the system:
1. Unlock the door using the key.(some vehicles will also disarm the system by unlocking
the driver’s door “twice” with the key).
If not, proceed with the following steps.
2. Enter the vehicle.
· The system will trigger.
3. Turn the ignition key on.
4. Press and hold the override switch for 5 seconds, the system will disarm.
5. The vehicle will now be able to start.
Valet Mode
The Valet Mode temporarily disables the security system so the vehicle may be operated by a
mechanic or parking attendant.
To activate or deactivate the Valet Mode:
1. Turn on the ignition.
2. Press and hold the override switch for 5 seconds.
· The Horn will Honk once and the LED light will stay ON to confirm the Valet Mode is
on.
· The Horn will Honk twice and the LED light will turn OFF to confirm the Valet Mode is
off.
3. Turn off the ignition.
While in Valet Mode the remote transmitters will continue to lock and unlock the doors, and
operate the optional auxiliary functions.
Remote Sensor Disable
When parking the vehicle in areas susceptible to unwanted disturbance from animals or strong
weather conditions that could cause the sensors to trigger, the sensor inputs can be temporarily
bypassed using the Remote Transmitter, preventing possible false alarms.
To disable the sensor inputs :
1. Arm the system normally.
2. Within 5 seconds of Arming the system, press the Arm button again.
·The horn will honk 5 times and the parking lights will flash 5 times to indicate the sensors are disabled.
·The sensors will remain disabled until the next arming cycle.
Ignition Controlled Door Locks
For added safety, the Ignition Door Locking feature allows vehicles equipped with power door
lock systems to automatically lock the doors when the ignition is turned on, and unlock the doors
after the ignition key is turned off. If a door is open when the ignition is turned on, the ignition
locking feature is disabled to protect against locking the keys inside the vehicle.