Utopia ANTIGUA User manual

ANTIGUA
LED TABLE LAMP
Operating Instructions

ANTIGUA
LED TABLE LAMP
LED 2.7K - 4K switchable
3.5W - DC 3.7V - IP65
110mm
300mm
Model Application Net Weight Dimensions Inner Box Outer Carton Pcs/Ctn
Antigua Rechargable 760g 110 x 300mm 150 x 125 x 340mm 395 x 320 x 360mm 6
table light
Input Voltage Power Safety Class Ingress Protection Beam Angle Light Source Luminaire Flux
DC3.7V 3.5W CLASS III IP65 100˚ SMD 270 lm
Materials
Die-cast aluminium alloy, clear polycarbonate diuser with optical structure.
How to use
This product is made exclusively for lighting purposes.
It must not be exposed to heavy mechanical loads or contamination. Please install and use only after thoroughly checking that it is undamaged.
Any installation or maintenance must be carried out while the product is turned o. Any alterations to the product, tampering with the product,
or failure to comply with the instructions may harm the product and make it hazardous. When fully assembled, the lamp (not including the
charging base), reaches an IP65 rating making it ideal for outdoor use. When assembled fully and on top of the charging base it has an IP20 rating
which means it is not suitable for outdoor use. All metal and plastic surfaces should be cleaned with a soft dry cloth. Utopia shall not be held
liable for any damage caused due to its products being assembled or used in any manner that does not comply with these instructions.
Battery charger technical data
• Contact charging base : INPUT/OUTPUT 5Vdc -1A; cavo USB 1.2 Mt.
• Charger: INPUT AC100-240V 50/60Hz; OUTPUT 5Vdc -1A.
• This lamp may also be used when connected to the charging base.
• It is advised that only the original provided charging base is used. Alternatively, 1A max chargers can be used.
Important to know
• The lamps supporting surface should not exceed 15° of tilt or it will fall.
• The provided battery has an overload protection function.
• To preserve the integrity of this battery, we recommend keeping the charging to 20% minimum to 80% maximum; if the lamp is not used
regularly it is advised to regularly charge/discharge it.
• Please refer to local laws/guidance for proper disposal/recycling of the battery.
Product Description
Table Lamp IP65
Magnetic Contact
Charging
ON/OFF TOUCH SWITCH
Turn lamp on/o with one touch
Enjoy the same brightness level as
previous use, with a smart
brightness level memory system.
STEPLESS DIMMER
Only works when the light is on.
CCT STEPLESS ADJUSTMENT
Only works when the light is on.
CHARGE
When Charging
Amber Light On
Fully Charged
Amber Light O
100% 0%
9 Hours
Max 6 Hours
AVOID DIRECT
SUNLIGHT
On O

Head Oce & Showroom
Utopia Tableware
One Langham Park,
Manseld Road,
Chestereld, S41 0GG
T. 01246 858800
E. [email protected]
www.utopia-tableware.com
/utopiatableware
@utopiatableware