UVI Group T30G User manual

T30G
Personal GPS Tracker User Manual
Designer and Manufacturer of GPS Tracking System & Solutions. 1
UVI GROUP CORPORATION Email/MSN: [email protected]
Export Office:
Address: 403, F/4, Rainbow Building, ShangMeiLin,Shenzhen, China
Tel: [phone] (Mobile phone: [phone])
Fax: [phone]
Website: www.uvi-group.com
General Business: [email protected] (Pls c.c. to [email protected] for backup)

Table of Contents
A. Working Directions········································································································4
B. System Introduction······································································································5
C. The button operations. ·································································································6
1. Function set·················································································································7
2. System set···················································································································8
D. Operating instructions.·······························································································12
1. Position Report Function·······················································································14
2. Tracking Function····································································································14
3. Stop tracking function.···························································································15
4. GPRS function of:····································································································15
5. Parameter setting：·································································································15
A. Set the APN····································································································15
B. Set the center IP and Port···········································································15
C. Set the terminal ID························································································15
Designer and Manufacturer of GPS Tracking System & Solutions. 3

A. Working Directions
Thank you for your purchase of T30G personal GPS Tracker. In order to realize the
full functions of this product, please read this manual carefully before starting to use the
product.
1. This product can only be maintained and repaired by qualified professional service
personnel. If you detach this product for maintenance or repair, your warranty will be
invalidated.
2. When connecting the other devices, read carefully their instruction manuals, so as to
carry out correct installation; do not connect incompatible device.
3. Please use genuine original parts and qualified batteries and peripheral equipments,
so as to avoid damage to this product.
4. As this product is a high-tech product, please read carefully this manual before
starting to use the product, so as to avoid inappropriate operation.
5. This product can work properly only when GSM communication is in good condition.
6. Please reduce electromagnetic wave interference to the product; and use it properly.
7. GPS communication is liable to be affected by environmental shielding; may fail to
carry out positioning during certain circumstances. It will resume the positioning
function as soon as it leaves the shielding environment. This is normal. Please do not
worry when encountering such problem.
8. Each signal sent out from the system will be confirmed for successful transmission in
the base station of the mobile operator. However, if system stoppage occurs or if the
mobile telephone is preset to a switch off state by the customer, it cannot ensure
successful transmission.
9. For safety reason, do not tell the other people your T30G mobile number, without
taking precautions. Otherwise, your privacy may be compromised along with other
safety problem.
Designer and Manufacturer of GPS Tracking System & Solutions. 4

B. System Introduction
T30G is a high-tech product through cooperation with mobile operators. It combines
GPS Global Positioning System and GSM communication system, which can clearly
inform you the position & situation of your Pets, the elderly and children.
GPS is the abbreviation for Global Positioning System, which based on 24 position
location satellites around the earth orbit. Their locating precision can be kept within 10 to
15 meters.
GSM is the second digital mobile communication system (GPRS, second and fifth
digital mobile communication system), and at present it is the mobile communication
system that has the largest coverage and owns the most number of users. This product
combines GPS and GSM/GPRS technologies together. It uses GPS system to locate your
Pets, the elderly and children, and sends the position/ situation report back to you via
GSM/GPRS communication system.
With a delicate mobile-phone, you can monitor the present situation in your Pets, the
elderly and children from a faraway place. You can use the telephone remote control
function to set monitoring mode, which will report the situation of your Pets, the elderly
and children to you periodically.
Our products have added A-GPS functions; it can greatly short the locating time, so
as to achieve rapid orientation purposes.
Designer and Manufacturer of GPS Tracking System & Solutions. 5

C. The button operations.
There are two buttons on the product. One is five-directional button, and another is a
side key. Press side key for a long time, you can turn on/off the device. Figure 1 shows the
main time page while the products are working.
Side Key
Five-Directional Button
Figure1
The icons on the top of the page are: signal strength, detecting of the SIM card, SMS
state or GPRS state, the power of the battery.
When the SIM card was detected, the no-card icon will disappear. Whether the
system works at GPRS or SMS state was identified by the third icon, the S denote the
SMS state, and the G denote the GPRS state.
As shown in the figure 1. 00:21 is the time; 09-01-01 was the date.
The moving speed is displayed on the right of the date.
If GPRS signal can’t be detected, there is no speed displayed.
The last two lines below the page are the longitude and the latitude. If there is no
GPRS signal, there is nothing displayed.
Designer and Manufacturer of GPS Tracking System & Solutions. 6

1.Function set
Press the 5-directional button to lighten the backlight. Press the side button to enter
the function settings page (as shown in figure 2).
In the function settings page, we can choose the function using the up and down
button. In the first item, it will send the SOS signal if anyone presses the 5-directonal
button. In the second item, we can choose turn on or turn off GPRS state using the right
and left key, and presses the 5-direction button down will affirm the state of current
choose. In the second item, we can choose turn on or turn off A-GPS state using the right
and left key, and presses the 5-direction button down will affirm the state of current
choose.
Press the side key to go back to the last settings page.
Figure 2
Designer and Manufacturer of GPS Tracking System & Solutions. 7

2.System set
Press the 5-directional button down to enter the system settings page (as shown in
figure 3). In the system set page, we can set the time, the date, and the wait time of the
GPRS return.
Press down the 5-directional button will affirm the choice and enter the corresponding
settings page, and press the side key to go back to the last page.
Figure 3
Designer and Manufacturer of GPS Tracking System & Solutions. 8

Figure 4 is the time settings page, up or down will change the time value, and right or
left button change the position. Pressing down the 5-directional button will affirm the
settings, the time is saved and return to the last page. Press the side key to go back to the
last page.
Figure 4
Designer and Manufacturer of GPS Tracking System & Solutions. 9

Figure 5 is the date settings page. They are the year, the month, the date in turn. up
or down will change the time value , and right or left button change the position. Pressing
down the 5-directional button will affirm the settings, the date is saved and returns to the
last page if the date format is right and if the date is wrong, and it won’t be saved. Press
the side key to go back to the last page.
Figure 5
Designer and Manufacturer of GPS Tracking System & Solutions. 10

Figure 6 shows the settings of the wait time of GPRS signal’s return page. The
maximum value is 59999 seconds. Up or down change the time value, and right and or
button change the position. Pressing down the 5-directional button will affirm the settings,
the time is saved and return to the last page. Press the side key to go back to the last
page.
Figure6
The long time press on the side key will shut up the product. And the small hole near
the side key is the reset hole.
Designer and Manufacturer of GPS Tracking System & Solutions. 11

D. Operating instructions.
SMS protocol of, the default password of is 000000
SMS Instruction Format Remark
1 Request one position V******,000
2 Modify user password V******,001,###### ****** is old password
###### is new password
3
Set the time internal of position
refresh
V******,002,XXX
XXX(3 digital) =000,stop
=[1——999] time internal (unit: min)
4
Set a preset phone number for
SOS button.
When this button is pressed,
Will send the SOS and position
message to the preset number.
V******,003,1,TelNumber
V******,003,2,TelNumber
TelNumber: Preset Tel. number, can set
2 numbers
(TelNumber must <20 digits )
5
Set low power alarm
When the voltage is lower than the
preset value, will send one lower
power alarm SMS to the control
number.
V******,004,X
X (voltage preset value)
=0 , close (default )
=1 , <3.5V send SMS alarm
=2 , <3.6V send SMS alarm
=3 , <3.7V send SMS alarm
=4 , <3.8V send SMS alarm
=5 , <3.9V send SMS alarm
6
Set over speed alarm
When the speed higher than the
preset value, will send one over
speed alarm SMS to the control
number.
V******,005,XX
XX (the speed preset value)
=00 , close
=[01≤XX≤20] (unit: 10Km)
7 Inquire the system state V******,008
Including the software version,
password, interval, speed limit, area
limit, I/O state, LED display state, GPS
state, SOS number, control number,
etc.
Designer and Manufacturer of GPS Tracking System & Solutions. 12

8 Set the APN V******,011,APN,user
name, password
e.g.:V000000,011,CMNET,,(CMNET
has no user name, password, however,
the comma must be there)
9 Set the center IP and Port V+Password,+012,+IP:P
ort
The IP and Port is the IP and Port of the
platform that customers used
10 Switch between SMS mode &
GPRS mode V******,013,X
X=0 SMS mode
X=1 GPRS mode
This command is effective in GPRS
mode.
11
Set the phone number
These phone numbers can
Request one position through
dialing.
V******,014,X,telnumber X:=1-5 position number of the phone
number
12 Set the terminal ID V******,015,terminal ID
The terminal ID is a 15 bit character
string; it can be capital letter or number.
eg: V000000,015,VICZONE00000001
13 Modify the IP and port of AGPS V******,020,ip:port
The IP and port is AGPS Server’s IP
and Port
14
Modify the username and
password of AGPS Server
V******,021,username,pa
ssword
Username and password is the
username and password of AGPS
Server
15 Turn on/off A-GPS Function V******,022,X
X =1, Turn on A-GPS (Default setting)
=0, Turn off A-GPS
16 Reboot the terminal V******,502
17 Clear all parameter V******,888 Including all configure and password
Notice: If you want to use low power alarm function, you must
set the time internal of position refresh function first.
Designer and Manufacturer of GPS Tracking System & Solutions. 13

1. Position Report Function
No matter where you are, when you want to know the position of the terminal, send a
SMS message or make a telephone call to the ; it will report its location back to you by
SMS.
Edit a message as following format, and then send it to
Format: V+Password,+000
(Default password is: 000000)
For example: V000000,000
The send back one SMS, which including the position information
Lat: 2232.6022N, Lon: 11402.2969E
This mean your position is on North Latitude 22 degree 32.2232 cent and East Longitude
114 degree 2.2969 cent
Apply for one position service by another way: you need pre-storage the phone number in
SIM card
(a) Make a cell phone call to
(b) Then, listen the rings of, it will hold off after two rings.
(Its non-alarm and monitoring number)
(c) Then, after 10 second, the cell phone will receive the Position SMS.
2. Tracking Function
Tracking report function can be turned on or off according to the requirements of the
user. Tracking function will continually report terminal position until it get stop
command .In this tracking mode, will send one position message at a preset time
interval.
Step1.Edit a message as following format, then send it to :
----- V+Password,+002,+XXX
(Note: XXX Unit: preset minute interval
-- if XXX=000 it is STOP tracking)
For example: V000000,002,003
(It means is will send Position Data every 3 minute.)
Step2. will send back one SMS-----Set Time OK.
This SMS means that is in tracking mode now and preset time interval is 3 minutes.
Step3. will send back position SMS at preset time interval.
In this example, the SMS will send back at preset time interval: 3 minute
Designer and Manufacturer of GPS Tracking System & Solutions. 14

Designer and Manufacturer of GPS Tracking System & Solutions. 15
3. Stop tracking function.
This function is used to turn off tracking report function.
Edit a message as following format, and then send it to:
Format: V+passwaord,+002,+000
For example: V000000,002,000
4. GPRS function of:
If you want to use the GPRS functions of, first you must set the GPRS parameters (APN,
Terminal ID, IP, port) in the SMS mode. Send V******, 013, 1 to turn into SMS mode
5. Parameter setting：
A. Set the APN
Send the SMS to the tracker as following format
----- V+Password,+011,+APN,+user name,+password
For example: V000000,011,CMNET,,
(CMNET has no user name, password)
B. Set the center IP and Port
Send the SMS to the tracker as following format
----- V+Password,+012,+IP:Port
For example: V000000,012,121.34.241.160:8086
C. Set the terminal ID
Send the SMS to the tracker as following format
----- V+Password,+015,+terminal ID
The terminal ID is a 15 bit character string; it can be capital letter or number.
For example: V000000,015,VICZONE00000001
After setting the parameters, send V******,013,1 to turn to GPRS mode.