Vacmaster AM1502 User manual

AM1502
220-240V~ 50HZ
PORTABLE AIR MOVER
AM1502 / 150W / 50HZ

2 3
TABLE OF CONTENTS
SECTION PAGE
Warranty
Safety Instructions and Warnings
Grounding Instructions
Specications
Operation
Storage
Maintenance
Troubleshooting
Disposal/Environmental protection
Thank you for purchasing this Vacmaster® air mover.
Feel condent that with Vacmaster® you are obtaining a high-quality product engineered for optimal performance.
3
3
4
4
4
6
6
7
7

2 3
WARRANTY
Vacmaster® takes pride in producing a high quality, durable product. This
Vacmaster® product carries a limited two (2) year warranty against defects
in workmanship and materials from date of purchase under normal household
use. Warranty does not apply to defects due to direct or indirect abuse,
negligence, misuse, accidents, repairs or alterations and lack of maintenance.
Please keep your receipt as proof of purchase.
SAFETY INSTRUCTIONS & WARNINGS
IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE
USING THIS AIR MOVER.
Read and understand this operator’s manual and all labels on the
air mover before operating. Safety is a combination of common
sense, staying alert, and knowing how the air mover works. Use
this air mover only as described in this manual.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK
OR INJURY:
• This air mover is intended for household use and similar purposes,
including blowing air
• This device can be used by children aged 16 and over and by people
with reduced physical, sensory or mental capacities or with a lack of
experience or knowledge, if they are supervised or have been instructed
regarding safe use of the device and understand the resulting risks.
Children are not permitted to play with the device. Cleaning and user
maintenance are not to be undertaken by children without supervision.
• Never leave a machine which is ready for operation unattended at the
workplace.
• Ensure that the mains cable is not damaged by being pulled over sharp
edges, by jamming, or by pulling on the cable.
• Before each use, check the power supply lead and the extension cable for
damage and ageing. Do not use the equipment if the cable is damaged or
worn. Danger of electric shock hazard.
• If the power cable for this equipment is damaged, it must be replaced by a
suitably qualied repair specialist in order to prevent hazards.
• If air mover is not working as it should, or has been dropped, damaged,
left outdoors, or dropped into water, take it to a suitably qualied repair
specialist for inspection and repair before using it again.
• Switch the machine off and disconnect the mains plug:
- when the machine is not in use,
- before the machine is opened up,
- for all maintenance and cleaning work,
- if the connecting cable is damaged or tangled up.
• Never use the mains lead to pull the plug out of the socket or to pull the
appliance. Protect the cable from heat, oil, and sharp edges.
• Make sure that the mains voltage corresponds with the information on the
rating plate.
• Only plug the appliance into a socket which is safeguarded by at least 16 A.
• The device must only be connected to a mains socket via a residual-
current circuit breaker (RCD) with a rated leakage current of not more
than 30 mA.
• Do not use with a solid state speed control device.
• For indoor use only, Do not expose to rain. Store indoors.
• Do not handle the plug or air mover with wet hands.
• Do not run cord under carpeting. Do not cover cord with throw rugs,
runners, or other coverings. Direct cord away from trafc areas where it
will not be tripped over.

4 5
• Do not put any object into intake openings.
• Never operate this air mover with intake grills removed or intake openings
blocked.
• This air mover is equipped with an over-load protection device which
may shut down the unit during operation. To reduce the risk of injury from
accidental starting, turn off unit and unplug power cord when not in use or
before servicing.
• Keep hair, loose clothing, ngers, and all parts of body away from
openings and moving parts.
CAUTION:
• For dusty environment, wear a dust mask.
• Do not move or carry the air mover while it is operating.
• Only operate on a level, stable surface to prevent the air mover from
falling and potentially causing injury or damage to the unit or property.
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current to reduce
the risk of electric shock.
This air mover is for use on a nominal 220-240V circuit, and has a
grounded plug. The air mover should not be plugged into an outlet if it is
not grounded. Do not use with an extension cord.
SPECIFICATIONS
Motor : 220-240V ~ 50Hz
Power: 150W
Air ow：16m3/min
Power Receptacle
Intake Grill
(Left)
Air Discharge Grill
Power Cord
Reset Button
3-Speed On/Off Switch
Handle/Cord
Wrap
Peg for Stacking on
Side (4)
Receiver for Stacking Peg
(4)
3-Position
Anti-Skid
Feet (3 Pairs)
Intake Grill
(Right)
GETTING TO KNOW THE AIR MOVER
OPERATION

4 5
OPERATION (CONTINUED)
GENERAL USE INSTRUCTIONS
1. Verify that the 3-speed on/off switch is set to "0" (OFF) and the cord is
unplugged.
2. Place the air mover in the desired position on a stable surface. Ensure
there is at least a foot of clearance on each side of the air mover. Avoid
placing the air mover where loose fabric, sheets, or other objects can
get pulled onto the intake grills.
3. Direct air mover at the designated target area, using one of the
operational positions listed on page 5.
4. Plug in the air mover to a grounded. See page 4 for grounding
instructions. DO NOT USE WITH AN EXTENSION CORD
5. Turn on the air mover by rotating the 3-Speed On/Off Switch clockwise
to the desired power level (I, II, or III).
6. The air mover is tted with a socket near the On/Off Switch. The max
load on the socket is 1872W. Never to connect a power tool with power
more than 1800W.
7. The air mover is equipped with an overload protection feature. If the air
mover is overloaded, it will shut off and will need to be reset before it can
be used again. If this occurs, rst remove any power tool or other device
from the socket. Then set the on/off switch to "0" (OFF) and press the
reset button. Check that there are no obstructions preventing airow into
the intake grills before turning on the air mover again.
8. When nished, turn the 3-speed on/off switch counter-clockwise to the
"0" (OFF) position and unplug the power cord from the outlet. See page
8-9 for storage instructions.
Carpet and Flooring Stairs and Walls Ceilings
OPERATIONAL POSITIONS
• Do not stack air movers vertically during operation. To reduce risk of
overheating or overload, ensure area around intake grills are clear to
allow for unobstructed air ow.
• The total rated amperage for all units running through the unit plugged
into the outlet should never exceed 13A. Do not use an extension cord to
connect units, or to connect a unit to the wall outlet.
• This air mover has the ability to connect up to three units together to
maximize air circulation. To do this, plug the rst unit into a grounded
electrical outlet. Then plug a second unit into the receptacle of the rst
unit. A third unit can then be plugged into the receptacle of the second
unit. (Other units sold separately.)

6 7
STORAGE
MAINTENANCE
WARNING: DO NOT STORE OUTDOORS. STORE IN A DRY
ENVIRONMENT, AWAY FROM HAZARDOUS MATERIALS, SUCH
AS TOXIC, CARCINOGENIC, FLAMMABLE, OR EXPLOSIVE
SUBSTANCES.
CAUTION: TO PREVENT DAMAGE TO AIR MOVER, PROPERTY
DAMAGE, OR PERSONAL INJURY: DO NOT STACK MORE THAN
THREE UNITS HIGH. STACK ONLY ON A STABLE, LEVEL, EVEN
SURFACE. DO NOT TRANSPORT STACKED UNITS UNLESS THEY
ARE BRACED ON ALL SIDES.
CAUTION: DO NOT TURN ON THE AIR MOVER WHILE IT IS
STACKED. THE STACKING PEGS ARE FOR STORAGE PURPOSES
ONLY.
CORD STORAGE
Before storing the air mover, ensure the power switch is turned to the OFF
position, and unplug the unit from the power outlet.
Wrap the cord around the base of the handle.
Use the attached cord clip to hold the cord in place.
STORING THE AIR MOVER
To conserve space while storing multiple units, this air mover can be
stacked together with multiple additional units, as illustrated below.
To stack, the pegs on the intake grill on the power switch side of the unit
must be inserted into the peg receiver on the opposite side of the partner
unit.
WARNING: AFTER SERVICING OR CLEANING, ENSURE ANY
PROTECTIVE OR SAFETY DEVICES ARE REINSTALLED BEFORE
USE, INCLUDING INTAKE GRILLS OR AIR DISCHARGE GRILL, OR
IMPELLER.
Before and after each use:
Inspect the plug and the cord to ensure that it has not been damaged
during operation or between uses; if the plug or cord is damaged, do not
use the air mover and replace the damaged part immediately.
Check the air intake and air discharge grills and make sure they are free of
blockage.

6 7
TROUBLESHOOTING
DISPOSAL/ENVIRONMENTAL PROTECTION
WARNING! TO REDUCE THE RISK OF ELECTRIC SHOCK UNPLUG
BEFORE TROUBLESHOOTING.
Problem Possible Causes Corrective Action
Air Mover will
not operate.
1) No power supply. 1) Check power supply - cord,
breakers, and fuses.
2) Faulty power cord.
2) Unplug and check the power
cord. If damaged, have it
repaired by a professional.
3) Switch in the wrong
position.
3) Move switch to the "On"
position (I, II, or III).
4) Switch is faulty or
burned out.
4) Have switch replaced by a
professional.
5) Overload protection
has engaged, shutting
off the air mover.
5) Ensure the switch is turned to
the "Off" position (0) and press
the reset button.
Air Mover
runs but
makes loud
scraping
noise.
1) Accident to unit
has caused deformed
housing or misaligned
wheel.
1) First remove the products in
the socket.
2) Replace air mover.
Air Mover
runs but
blower wheel
does not
rotate.
1) Blower wheel and
housing are jammed. 1) Replace air mover.
Air Mover
runs but with
excessive
vibration.
1) The blower wheel has
dirt build up. 1-2) Have air mover inspected
by a professional.
1) Have blower wheel cleaned
by professional.
2) Replace air mover.
2) The blower wheel is
damaged or the motor
is bent.
Disposal Information
The appliance contains electric and electronic components and
may not be disposed of as household garbage. The local and
currently applicable legislation must be observed unconditionally.
Be environmentally friendly. Return the tool, accessories and packaging to
a recycling centre when you have nished with them.
Machines must not be disposed of with household refuse.
Take the machine to a recycling point. The waste plastic and metal parts
can be separated, accurately graded and passed on for recycling.

AM1502
cleva-uk.com