No tools required for assembly.
Important - Please read these instructions fully before starting assembly
•Assemble the item as close to the position (in
the same room) as possible.
•Assemble on a soft level surface to avoid
damage to the item.
•Part of the assembly maybe easy with two
people.
•Use only the tools as shown below.
•Do not dispose of packaging until the
assembly is complete.
•Dispose of all packaging carefully and
responsibly at your local recycling plant.
•More stubborn marks can be
removed using a damp (not wet)
cloth. Wipe the item dry using a lint
free cloth.
•DO NOT use detergents, abrasive
cleaning products or cleaning
products that contain ammonia,
solvents or silicone as these may
damage the surface of the item.
•Regulary check that there are no
lose screws on the light fitting and
plug.
•Always disconnect power supply when
servicing or cleaning.
•Use a duster to reach even the most
difficult of spaces.
•It it’s been a while since you’ve dusted
your lights, consider wearing a mask to
protect your mouth and nose.
•After wiping down the dirt, dust and
any residue left behind, check for
damage, broken or missing pieces.
•Check you have all the components and
tools listed on page 2.
•Remove all fittings from the bag and
separate them into their groups.
•Keep children and animals away from the
work area. Small could parts/components
could choke if swallowed.
•Make sure you have enough space to
layout the parts before commencing with
the assembly.
•Do not stand or put weight on to the item.
This potentially could cause damage.
Tools Required. Not supplied.
