6
Section 2 Operation of vehicle
I. Operation description
(I) Key
Two key are provided for a vehicle (Key with code anti-theft system
sees Chapter 6).
Vehicle key has the following functions:
1. To control the power supply of vehicle electrical equipment.
2. To unlock and lock vehicle door lock.
3. To unlock and lock fuel tank cap
(II) Door lock and door window
a) Front door lock
Unlocking and locking outside a vehicle, as shown in Fig. 1.2-2.
Turning key clockwise can unlock left front door lock, turning key
anticlockwise can unlock right front door lock, vice versa, lock the
door lock.
Unlocking and locking inside a vehicle, as shown in Fig. 1.2-2. Lift
inner lock button, pull inner handle, vehicle door is unlocked; shut
vehicle door, press inner lock button, vehicle door is locked.
Note: When vehicle is running, inner lock button must be pressed, to
avoid accidentally pulling inner handle to open the vehicle door.
The door can be locked outside vehicle without key. First, open
vehicle door, press inner lock button, then lift the handle outside the
door, the door is locked, as shown in Fig. 1.2-3. But outer handle
should be pulled once, to affirm if the door is locked really or not .
Fig. 1.2-1 Fig. 1.2-2
Fig. 1.2-3
2. Middle door lock
When unlocking outside vehicle, pull backward outer handle, vehicle
door is opened.
Unlocking and locking inside vehicle, as shown in Fig. 1.2-4. Lift
inner lock button, pull backward handle, slide door is opened. Pull
forward inner handle to close vehicle door, press inner lock button,
vehicle door is locked.
Chapter I. Whole Vehicle Operation and Service Manual on VANTAGE TruckALL& VanGO Series
