Vantech J2026W User manual

Warehouse Use Only
Part #: J2026W
Dimensions: 6” X 6” X 56” (Telescopic)
Weight: ???
Part # QUANTITY
D069 1
D115 1
D119 1
G004 4
M13W 4
A286-55W 2
BG555 2
A03 4
A11 1
A15 1
A69 1
W

REQUIRED TOOLSPRODUCT INFO
Part #: J2026W
System: J2000
Material: Aluminum
Fitment: Universal (Drilling Required)
Color: White
1/2” Wrench
Power Tool With 5/16” Drill Bit
Marker
MARKER
3/16” Allen Key Wrench

PART # DESCRIPTION QTY ITEM
ITEM NOT DRAWN TO SCALE
S052 DOUBLE SLIDER 2” BOLT TO BOLT 4
S062 DOUBLE SLIDER 1 3/8” BOLT TO BOLT 1
W008 5/16” X 3/4” WASHER 28
B015 5/16” X 1” CARRIAGE BOLT 2
B016 5/16” X 1 1/4” CARRIAGE BOLT 8
B118 5/16” X 1 1/4” BUTTON HEAD ALLEN BOLT 8
N005 5/16” NYLON NUT 20
M13 MOUNTING BASE 4
M07 INTERIOR PLATE 4
A286-55 3” X 1.5” X 55” CROSS BAR 2
G004 POLYFOAM GASKET 1.5” X 4” 4
BG555 RUBBER BAR GUARD 55” 2
A03 SIDE SUPPORT 4
A11 LADDER BASE 1
A15 STOPPER 1
A69 EZ-VELCRO STRAP 1

SYSTEM PLACEMENT
MUST BE PLACED IN THIS ORDER
A286
FRONT
REAR
Do not tighten hardware
M13
M13
EZ-Velcro Strap Directions
RubbeR baR GuaRds
- Press the rubber bar guard into the channels of cross bars
RubbeR baR GuaRds
- Press the rubber bar guard into the channels of cross bars
- Leave 1” on each end
W008
N005
M13
S052

MARKER
*Remove van rack and
use a 5/16” drill bit.
*Mark with marker.
Align with interior
plate to ensure bolt
alignment.
M07

90°
90°
90°
90°
Tighten all hardware
B118
W008
A03
Repeat for all cross Bars
Installed onto front cross bar
B015
W008
W008
A15
N005
N005
S062
A11
B016
W008
N005
M07
Front Rear
Front
Ladder Stopper
Rear
Velcro Strap
Ladder Stopper Velcro Strap
Ladder Guide
Accept no compromises, choose only quality truck bed accessories.
Feel the difference with Vantech.