VARSITY Scoreboards 2240 PPF5 User manual

MODEL 2240 PPF5
Installation Manual

2
SERVICE
Technical support is available 24 hours a day, 7 days a week.
1-800-411-3136
https://www.varsityscoreboards.com/support/contact-support.html
(link to ll out support request on website)
WARRANTY
This product is warrantied against defects in materials and workmanship for
the period specied in the warranty from the date of invoice.
MODEL 2240 PPF5 INSTALLATION

3
A NOTE TO INSTALLERS
If you are installing this scoreboard for a client, please return the manual to the
individual in charge of the scoreboard upon completion of installation.
SCOREBOARD DIMENSION
16’ wide x 7’ tall x 8” depth

4
MODEL 2240 PPF5 INSTALLATION . . . . . . . . . . . . . . . . . . . . . 5-6
INSTALLATION OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PRODUCT SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
JOINING THE TWO PANELS TOGETHER . . . . . . . . . . . . . . . . . . . . 9
JOINING THE TWO PPF5 PANELS TO THE SCOREBOARD . . . . . . 10-11
MOUNTING THE SCOREBOARD ON A WALL . . . . . . . . . . . . . . . . . 12
HANGING THE SCOREBOARD FROM THE CEILING . . . . . . . . . . . . 13
RUNNING & CONNECTING THE ELECTRIC SERVICE . . . . . . . . . . . . 14
INSTALLING SPONSOR PANELS . . . . . . . . . . . . . . . . . . . . . . 15-16
TESTING THE INSTALLED SYSTEM . . . . . . . . . . . . . . . . . . . . . . 17
TABLE OF CONTENTS

5
Please inspect all shipping containers upon arrival for damage and ensure
that you have all the parts listed below:
(1) 16’ x 7’ Basketball Scoreboard
Shipped in four (4) sections
MODEL 2240 PPF5 INSTALLATION

6
ITEMS IN
ACCESSORY BAG
(1) LCD Wireless
Keyboard Controller
(1) Sport Inserts
(1) 12-Volt Adapter
INSTRUCTIONS FOR
REPORTING SHIPPING DAMAGE
1/
Note “DAMAGED” on the Delivery Receipt Form, including details
of the type of damage to the freight and packaging.
2/
Ask the delivery driver to call the local terminal and report
immediately.
3/
Contact Varsity Scoreboards immediately while the delivery
driver is still present to report the damage.
A. Phone number
B. Email
Shipping damage must be noted at the time of delivery. The shipper is not
responsible for shipments that aren’t sighted for as damaged upon arrival.
The shipper is responsible for ling a claim, unless shipped 3rd party.

7
INSTALLATION OVERVIEW
This manual will walk you through the installation of the scoreboard. While
care has been taken to consider the many scenarios for installation, some
general infromation applies to all. Follow this guide as closely as
possible to ensure proper installation.
1 /
Review the product specications below to determine your
specic installation hardware.
2 /
Determine the scoreboard’s location and orientation.
3 /
Mount the scoreboard on a wall, or suspend the scoreboard from
a structure such as a ceiling.
4 /
Run and connect the electrical service to the scoreboard.
5 /
Test the installed system.

8
CONSTRUCTION
22-gauge galvanneal steel cabinet with powder coat nish for strength,
durability, and lasting appearance.
PRODUCT SPECIFICATIONS
OVERALL DIMENSIONS WEIGHT
16’ L x 7’ W x 8” D - shipped in four (4)
sections
Hanging weight = approximately 560 lbs
Shipping weight = approximately 625 lbs
INSTALLATION RECOMMENDATIONS
We recommend this model to be installed by mounting to a wall or
suspending the scoreboard from the ceiling.
Installation hardware not supplied. Check local code for requirements.
Anchors, bolts, chains, cables and related hardware must meet minimum
weight requirements.

9
Carefully remove the scoreboard from its packaging, making sure not
to pry against or cut into the cabinet. Inspect each unit for shpping
damage according to the instructions on page 6.
1 /
Lay both sections down, face up, with the cabinets aligned.
Connect the sections with the supplied plates, one on the top,
and one on the bottom as pictured.
JOINING THE TWO PANELS TOGETHER

10
Carefully remove the player-point-foul panels from their packaging,
making sure not to pry against or cut into the cabinet. Inspect each
unit for shpping damage according to the instructions on page 6.
1 /
Lay the assembled scoreboard and both player-point-foul
sections down, face up, with the cabinets aligned. Connect the
sections with the supplied plates, two on the top, and two on the
bottom as pictured.
JOINING THE TWO PPF5 PANELS TO THE SCOREBOARD
NOTE: The cabinets must be joined on both the TOP AND BOTTOM
using four plates and sixteen bolts.

11
2 /
Connect a lifting device to the 6 outside hanging brackets on the top
of the scoreboard and lift enough to acquire access to the back of the
panels. Cardboard or foam packaging can be used as a pad between
the lift and scoreboard to protect the scoreboard face.
3 /
Open both access doors on the back and connect the wiring.
Make sure you note the wiring of the connectors as they can be
connected backwards. The at ribbon cable will have a purple
line on one side so be sure this matches. The power harness will
only connect one way.
Crossover Ribbon
Power Harnesss
10 Pin Header

12
Carefully remove the scoreboard from its packaging, making sure not
to pry against or cut into the cabinet. Inspect each unit for shipping
damage according to the instructions on page 6.
1 /
Connect a lift device to the two hanging backets on top of the
scoreboard and lift the scoreboard into place. Refer to the illustration
to see the location of the hanging/lifting holes.
MOUNTING THE SCOREBOARD ON A WALL
NOTE: Use hardware appropriate for the wall type you are mounting
to that is capable of supporting the weight of the scoreboard. No
mounting brackets are necessary as the pre-drilled mounting anges
on the top and bottom of the scoreboard are provided to mount the
scoreboard directly to the wall. The scoreboard must be attached to
the wall securely through all twelve (12) mounting holes in the top
and bottom mounting anges. (See the gure for location of mount-
ing holes and mounting anges).
2 /
Lift the scoreboard to the desired location and mark the
holes in the top and bottom anges. It may be necessary to mark the
top ange, install anchors, and secure the top of the scoreboard
before having access to the bottom ange. Ensure that you use
all four mounting holes in the top and bottom anges.

13
Carefully remove the scoreboard from its packaging, making
sure not to pry against or cut into the cabinet. Inspect each unit
for shipping damage according to the instructions on page 6.
1 /
If eye bolts, cables, or chains are to be used to suspend the
scoreboard, unsure that they are capable of supporting the
weight of the scoreboard. Choose one of the following methods
to get the scoreboard into place:
Connect the cables or chains you will use to suspend the score-
board to the hanging brackets on top of the scoreboard cabinet
using “C” clips or clevises. Connect the strap, cable, or chain you
will use to lift the scoreboard to the two outside mounting holes
in the top rear ange.
OR
Connect the cables or chains you will use to suspend the score-
board to the hanging brackets on top of the scoreboard cabinet
using “C” clips or clevises. Connect the strap, cable, or chain you
will use to lift the scoreboard to the same “C” clips or clevises.
HANGING THE SCOREBOARD FROM THE CEILING
2 /
If the scoreboard will be against the lift during lifting, place card-
board or foam between the lift and scoreboard to protect the face
of the scoreboard. Lift the scoreboard into place. Check clearance
during lift. Connect the suspension system and lower the score-
board until its weight is on the suspension system and disconnect
the lifting cables from the scoreboard.
3 /
Place a level in the top channel of the scoreboard cabinet to see if
adjustments need to be made.
NOTE: It is recommended that the cables that will be used to
permanently suspend the scoreboard be attached to the
ceiling structure rst, then to the scoreboard’s hanging
brackets after it is lifted into position using a lifting device.

14
RUNNING & CONNECTING THE ELECTRIC SERVICE
NOTE:
THIS PORTION OF THE INSTALLATION REQUIRES A LICENSED ELECTRICIAN. IDEALLY,
THE SCOREBOARD WILL BE POWERED FROM A DEDICATED 120V/20A CIRCUIT.
ADDITIONALLY, SINCE THE SCOREBOARD’S POWER SHOULD BE TURNED OFF AFTER
EACH USE, THERE SHOULD BE EASY ACCESS TO THE POWER SWITCH OR CIRCUIT
BREAKER. IF ACCESS TO THE CIRCUIT BREAKER IS NOT AN OPTION, INSTALL A SWITCH
SOMEWHERE THAT IS ACCESSIBLE, EVEN IF UNDER THE SCOREBOARD AT AN ABOVE
AVERAGE HEIGHT.
1/
Open the power/signal access
door on the top of the score-
board. Locate the power input
wires.
2/
The connections are stan-
dard black, white, and green
(ground). Included is a utility
ground which must be used.
Make up the power supply con-
nections and replace the utility
box cover.
3/
Close and secure the power/
signal access door.
NOTE: The location of the disconnect switch
after installation shall comply with Article 600
of the National Electric Code.

15
INSTALLING SPONSOR PANELS
NOTE:
DETERMINE NUMBER OF SPONSOR PANELS
BEING INSTALLED AND THEIR LOCATION.
(2) 21” x 8’ Panel
(6) Mounting Brackets
(6) 3/8-16 x 3/4” Bolts
(6) 3/8-16 Hex Nuts
(18) #8 x 1/2” Self Tap
Screws
(6) M3/8” Flat Washers

16
1/
Before the sponsor panels
are lifted into place, attach
the mounting brackets to the
panels using the supplied
hardware. The brackets t
inside the panels (illustrated
above). The top (for top-
mounted installations) or the
bottom (for bottom-mounted
installations) of each panel is
pre-drilled for the brackets.
2 /
Lift the sponsor panels into
place with the panels resting
on top of the scoreboard for
top-mounted installations
or against the bottom of
the scoreboard for bottom-
mounted installations. The
face of the panel should be
at against the
scoreboard’s front ange
(illustrated above).
3 /
Secure the mounting
brackets to the wall,
using mounting hardware
appropriate to the surface
(illustrated above). All
mounting hardware required
for securing the panel to the
wall is the responsibility of
the installer.
4 /
Install self tap screws through
the scoreboard’s front ange
and into the sponsor panel faces,
spaced evenly.
NOTE: To avoid damaging
border striping please drill
approximately 1 inch from the
edge of the scoreboard’s ange.

17
1/
While holding down the
OPTIONS button, turn the
wireless controller on.
TESTING THE INSTALLED SYSTEM
Please refer to the OPERATORS MANUAL for startup instructions.
AFTER INSTALLATION IS COMPLETE, HAVE
THE INSTALLER TEST THE SCOREBOARD
BY FOLLOWING THE STEPS BELOW:
2/
The screen will display
“Select Diag Mode.” Press
the down arrow once to
scroll to “Digit Test.” Press
ENTER.
3/
The screen will display
“Segment Test” and
“Segments Off.” Press the
down arrow once to display
“Segments On.” When all
segments are on, all digits
should display “8.”
4/
Press the down arrow again
to display “Digits Count.” All
digits should continuously
count from 0-9.
5/
If all digits turn on and
count, the installer can
then turn off the wireless
controller.
Congratulations!
You’ve successfully installed your
Varsity Scoreboard!
If any problems arise, please have the installer call Varsity Scoreboards Customer Service at 1-800-411-3136 while the installer is still
present at the scoreboard.