VARSITY Scoreboards 2210SA User manual

MODEL 2210SA
Installation Manual
Standalone Version

WARRANTY
This product is warranted against defects in materials and workmanship for
the period specied in the warranty from the date of invoice.
SERVICE
Technical Support is available 24 hours a day, 7 days a week.
1-800-411-3136
https://www.varsityscoreboards.com/support/contact-support.html
(link to ll out support request on website)
MODEL 2210SA INSTALLATION

If you are installing these shot clocks for a client, please return the manual to the
individual in charge of the shot clocks upon completion of installation.
SHOT CLOCK DIMENSIONS
26” wide x 25” tall x 6” depth
A NOTE TO INSTALLERS

MODEL 2210SA INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . 5-6
INSTALLATION OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PRODUCT SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
MOUNTING THE SHOT CLOCKS TO A WALL . . . . . . . . . . . . . . . . . . 9
SUSPENDING THE SHOT CLOCKS . . . . . . . . . . . . . . . . . . . . . . . 10
CONNECTING AND RUNNING ELECTRIC . . . . . . . . . . . . . . . . . . . 11
WIRELESS SHOT CLOCKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
TABLE OF CONTENTS
BBL CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
TESTING THE INSTALLED SYSTEM . . . . . . . . . . . . . . . . . . . . . . 14

5
MODEL 2210SA INSTALLATION
(2) 26” x 25” Basketball Shot Clocks
Shipped in two (2) sections
Please inspect all shipping containers upon arrival for damage and ensure
that you have all of the parts listed below:
ITEMS IN
LARGE PACKAGE(S)

6
ITEMS IN
ACCESSORY BAG
INSTRUCTIONS FOR
REPORTING SHIPPING DAMAGE
Shipping damage must be noted at the time of delivery. The shipper is not
responsible for shipments that aren’t sighted for as damaged upon arrival.
The shipper is responsible for ling a claim, unless shipped 3rd party.
1 /
Note “DAMAGED” on the Delivery Receipt Form, including details
of the type of damage to the freight and packaging.
2 /
Ask the delivery driver to call the local terminal and report
immediately.
3 /
Contact Varsity Scoreboards immediately while the delivery
driver is still present to report the damage
A. Phone number
B. Email
(2) Wireless Receivers
(1)%DWWHU\&KDUJLQJ
'RFN
(1)86%&KDUJHU
(1)PSC1 Controller

7
INSTALLATION OVERVIEW
This manual will walk you through the installation of the shot clocks. While
care has been taken to consider the many scenarios for installation, some
general information applies to all. Follow this guide as closely as
possible to ensure proper installation.
1 /
Review the product specications below to determine your
specic installation hardware.
2/
Determine the shot clocks location and orientation.
3/
Mount the shot clocks on a wall, suspend them from a structure,
or mount them on the backboards.
NOTE: For backboard or goal mounting instructions,
please contact the manufacturer of your goal/
backboard.
5/
Run and connect the electrical service to each shot clock.
6/
Test the installed system.

8
PRODUCT SPECIFICATIONS
CONSTRUCTION
22-gauge galvanneal steel cabinet with powder coat nish for strength,
durability, and lasting appearance
INSTALLATION RECOMMENDATIONS
We recommend this model to be installed by mounting to a wall or
suspending the shot clocks. For backboard or goal mounting
instructions, please contact the manufacturer of your
backboard or goal.
Installation hardware not supplied. Check local code for requirements.
Anchors, bolts, chains, cables and related hardware must meet minumum
weight requirements.
OVERALL DIMENSIONS
26” L x 25” W x 6” D - shipped in two (2)
sections
WEIGHT
Hanging weight = approximately 35 lbs per clock
Shipping weight = approximately 100 lbs

9
MOUNTING THE SHOT CLOCKS ON A WALL
Carefully remove each shot clock from its packaging, making sure
not to pry against or cut into the clock’s cabinet. Inspect each unit
for shipping damage according to the instructions on page 6.
1 /
Connect a lift device to the hanging/lifting holes on the top of the
clock and lift the unit into place. Refer to the illustration to see the
location of the hanging/lifting holes.
If anchors are to be used, use the pre-drilled mounting holes in
the left and right mounting anges as a template for marking the
drill locations for the anchors, two (2) through the left mounting
anges and two (2) through the right mounting ange.
2 /
Move the clock away from the wall and drill the holes for the an-
chors. Install the anchors in the wall. Refer to the illustration to see
the location of mounting anges and mounting holes.
3 /
Once the anchors are installed (or if no anchors are to be used)
the clock may be fastened securely to the wall. Use hardware
appropriate for the surface to which the unit will be mounted.
4 /
For concrete or concrete block walls, the use of bolts and
anchors is recommended. No mounting brackets are necessary as
the pre-drilled mounting anges on the left and right of the clock
are used to mount the unit directly to the wall.
5 /
The clock must be attached to the wall securely through both
mounting holes in the left mounting ange and both mounting
holes in the right mounting flange. Refer to the illustration to see
the location of the mounting flanges and mounting holes.
NOTE: The location of the disconnect switch after
installation shall comply with Article 600 of the National
Electric Code.

10
SUSPENDING THE SHOT CLOCKS
Carefully remove each shot clock from its packaging, making
sure not to pry against or cut into the clock’s cabinet. Inspect
each unit for shipping damage according to the instructions on
page 6.
1 /
If the clock must be lifted into place before the permanent sus-
pension cables can be attached the unit may be raised into posi-
tion by connecting a lift device to the two top mounting holes in
the unit’s left and right mounting anges.
2 /
Then, two (2) separate suspension cables may be attached to the
hanging holes in the top of the unit. Refer to the illustration to see
the location of the hanging holes and side mounting anges.
3 /
If the clock is to be lifted into position using the same cables that
will permanently suspend it, these cables may be attached direct-
ly to the hanging holes in the top of the unit.
NOTE: It is recommended that the cables that will be used to
permanetly suspend the shot clocks be attached to the structure
rst, then to the clock’s hanging holes after it is lifted into posiiton
using a lifting device.

11
RUNNING & CONNECTING THE ELECTRIC SERVICE
NOTE:
THIS PORTION OF THE INSTALLATION REQUIRES A LICENSED ELECTRICIAN. IDEALLY,
THE SCOREBOARAD WILL BE POWERED FROM A DEDICATED 120V/20A CIRCUIT.
ADDITIONALLY, SINCE THE SCOREBOARD’S POWER SHOULD BE TURNED OFF AFTER
EACH USE, THERE SHOULD BE EASY ACCESS TO THE POWER SWITCH OR CIRCUIT
BREAKER. IF ACCESS TO THE CIRCUIT BREAKER IS NOT AN OPTION, INSTALL A SWITCH
SOMEWHERE THAT IS ACCESSIBILE, EVEN IF UNDER THE SCOREBOARD AT AN ABOVE
AVERAGE HEIGHT.
1 /
Open the power/signal access
door on the top of the shot
clocks. Locate the power
input wires.
2 /
The connections are stan-
dard black, white, and green
(ground). Included is a utility
ground which must be used.
Make up the power supply
connections and replace the
utility box cover.
3 /
Close and secure the power/
signal access door.

12
WIRELESS SHOT CLOCKS
Below is a picture of the back of one of the wireless shot clocks. The wireless receiver is attached inside the unit
and you have up to 10 feet of slack on its cable. Remotely mount this receiver by removing the white strips o the
adhesive and place on a clean, smooth, surface in close proximity to the shot clock.
NOTE: ENSURE THAT THE RUBBER ANTENNA IS POINTED STRAIGHT UP AND THAT THERE IS A
LINE OF SIGHT BETWEEN THE WIRELESS RECEIVER AND THE KEYBOARD CONTROLLER.

13
The Backboard Lighting (BBL) connection point is on the top of each of the shot clocks. Once
the shot clocks are installed and the BBL strips are installed, plus the XLR connection to a port
as shown below.
Please refer to your BBL Installation Manual for further instructions on their installation.
BBL CONNECTION
NOTE: If you purchased the shot clock standalone version, please skip to Testing the
Installed System on the next page.

14
TESTING THE INSTALLED SYSTEM
Please refer to the OPERATORS MANUAL for startup instructions.

15
Congratulations!
You’ve successfully installed your
Varsity Scoreboard!
If any problems arise, please have the installer call Varsity Scoreboards Customer Service at 800-411-3136 while the installer is still
present at the scoreboard.