Simplified Illustration of Operation of System Controller VC-SC1000M
- 9 -
Description of Operation Keys of the Controller for VC Camera for VC User
No. Keys of the controller Usage
1) * SET+N+ENTER Set preset N
2) SHOT+N+ENTER Go To Preset N(N=0:Start Sequence Prepos)
3 )* SET+N+ON Insert Prepos In Stack
Delete Prepos From Stack
4 )* SET+N+OFF --N=0: Delete all Prepos From Stack
5 )* SET+N+SET Set Stack Dwell time
6 )* SET+ON Set up AUTO_PANING Start LIMIT
7 )* SET+OFF Set up AUTO_PANING End LIMIT
8 )* SET+N+SHOT Set up speed of AUTO_PANING(N=1~9)
9 ) AUTOPAN Run AUTOPAN
10 ) ON+CAM+ENTER Unlock current camera
11) OFF+CAM+ENTER Lock current camera
12)* ON+CAM+N+ENTER Open CAM Auxiliary
13)* OFF+CAM+N+ENTER Close CAM Auxiliary
--N=0:Set up/Dismantle terminal alarm
--N=1～8:Open/Close auxiliary Switch
--N=9:Auto/Manual Focus
For
12)&13)
--N=10:Auto/Manual Iris
14)* CAM+MENU Enter Camera Menu
15) CLOSE+N (simultaneously) CLOSE @ Speed N(N=1~9)
16) OPEN+N (simultaneously) OPEN @ Speed N(N=1~9)
17) NEAR+N (simultaneously) NEAR @ Speed N(N=1~9)
18) FAR+N (simultaneously) FAR @ Speed N(N=1~9)
19) TELE+N (simultaneously) TELE @ Speed N(N=1~9)
20) WIDE+N (simultaneously) WIDE @ Speed N(N=1~9)
21) SET+N+CLOSE+ENTER Set Close Speed N(1~9)
22) SET+N+OPEN+ENTER Set Open Speed N(1~9)
23) SET+N+NEAR+ENTER Set Near Speed N(1~9)
24) SET+N+FAR+ENTER Set Far Speed N(1~9)
25) SET+N+TELE+ENTER Set Tele Speed N(1~9)
26) SET+N+WIDE+ENTER Set Wide Speed N(1~9)
NOTE: One who has authority of management can set up.
