DIN-Based Metric Subrack Ordering Information
CCK -160 3U
Rack Height
Model Type 3U = 5.25”H x 19.0”W
CCK- Card cage frame kit 6U = 10.50”H x 19.0”W
CCA- Factory Assembled 9U = 15.75”H x 19.0”W
Card Depth Standard Card Heights
160 -160mm, 6.299” 3U = 100mm (3.94”)
220 -220mm, 8.66” 6U = 233.35mm (9.187”)
280- 280mm, 11.02” 9U = 366.70mm (14.437”)
340- 340mm, 13.39”
400- 400mm, 15.75”
34 www.vectorelect.com 800-423-5659
NON EMC
Subracks
Specification subject to change without notice
Vector subrack packaging for 19”
systems offers a versatile and com-
prehensive solution to your packag-
ing needs. Based on DIN 41914,
all parts conform to a system which
allows your unique design to be
constructed from a combination of
standards. You may mix different
module sizes and add accessories
without the need for special
designs. Subracks and accessories
are available “off the shelf”, afford-
ing you short lead times for on time
completion of your project.
COMPLETE DIN SUBRACKS FULLY ASSEMBLED OR KITS
CCK Card Cage (subrack) frame only kit including sidewalls, front, rear and rear-center extrusions, all
nut strips, backplane insulators and assembly instructions. CG1-series VectorPaktm card guides sold
separately. Guide positions are variable at 1HP (0.200”) horizontal increments.
CCA Card cage (subrack) frame only described above , but factory assembled.
CG1-series VectorPaktm card guides sold separately
VectorPaktm Kit (CCK)
Non EMC DIN-Based VectorPaktmSubracks
CCA160-6U shown with 1 pr. of
CG1-160 card guides installed CCA160-3U shown with 1 pr. of
CG1-160 card guides installed
CATALOG 128_CATALOG 128.qxd 4/24/2014 10:10 AM Page 34
