Veikk VK1560 User manual

VK1560 Pen Display
BATTERY-FREE PEN DISPLAY
Windows 10/8.1/8/7/Vista/XP(32/64 bits)
Mac OS 10.8 or later
www.veikk.com
User Manual

IMPORTANT SAFETY INSTRUCTIONS
WARNING
Donotusethisproductinacontrolsystemthatrequiresahigh
degreeofsafetyandreliability.
Insuchasystem,thisproductcouldnegativelyaffectother electronic
devicesandcouldmalfunctionduetotheeffectofthosedevices.
Donotusethisproductinalocationfrequentedbylittle
children.
Makesurethatachilddoesnotputthepenor pentipinhis/her
mouth.
Thepentiporsideswitchcovercouldbedetachedandbe
accidentally swallowed.
Turnthepoweroffinareaswhereuseof electronicdevicesis
prohibited.
On boardanaircraftorinanyotherlocationwhereuseofelectronic
devicesisprohibited,thisproduct,iflefton,couldnegativelyaffect
other electronicdevices.UnplugtheUSB connector fromthis product
andturnthepower off.
CAUTION
Donotplacethisproductonanunstablesurface.
Placingthisproductoranunstableortiltedsurfaceorinalocation
exposed toexcessivevibrationscouldcauseittofalloffresulting
ininjury.

WARNING
Avoid high or low-temperature locations for storage.
Do not store this product in a location where the temperature drops
below 5℃ or goes above 40℃and in locations subject to excessive
temperature fluctuations. Failure to heed this caution could result in
damage to the product and its components
Do not disassemble.
Do not disassemble or modify this product as this could expose you
to heat, fire, electric shock and injury. Disassembling the product will
also void your warranty.
Do not use alcohol for cleaning.
Never use alcohol, thinner, benzene or other mineral solvents as
they could discolor or cause deterioration to the product.
Do not expose to water.
Do not place glasses or vases filled with water or other liquids near
this product. Exposure to water or liquid could damage the product.
Donotplaceheavyobjectsontopofthisproduct.
Donotsteporplaceheavyobjectsonthisproductasthiscould
damageit.

CAUTION
LimitationofLiability
Donotplacemetalobjectsonthisproductduringoperation.
Placingmetalobjectsonthisproductduringoperationcouldcauseitto
malfunction ordamageit.
Donotstrikethepenagainsthardobjects.
Strikingthepenagainsthardobjectcoulddamageit.
Donothandlethepenwithsoiledhands.
Thepenisahigh-precisioninstrument. Handlingitwithsoiledhands or
usingitinlocationsexposedtodustor strongodorsmaycause theentry
offoreignmatterwhichwillresultinbreakdown.
VEIKKshallinnoeventbeliablefordamagesresultingfromfiresor
earthquakes, thosecausedbythirdpartiesandthosearisingfromuser
misuse, abuseorneglect.
VEIKKshallinnoeventbeliableforincidentaldamages-includingbut
notlimitedtolossofbusinessincome, interruptionofbusinessactivities,
corruptionorlossof data-thatariseoutof theuseorfailuretousethis
product.
VEIKKshallinnoeventbeliablefordamagesresultingfromusesnot
documentedinthismanual.
VEIKKshallinnoeventbeliablefordamagesfrommalfunctioncaused
by connectiontootherdevicesoruseofthirdpartysoftware.

Catalog
1.General Information ..................................................................1
1.1Overview ................................................................................1
1.2System Requirement .............................................................1
1.3Hardware Specification ..........................................................1
1.4Display Connection ................................................................2
1.5Installation on Windows .........................................................3
1.6Monitor Mapping ....................................................................5
1.7Specification ..........................................................................6
2.VK1560 Pen Display Configuration .........................................7
2.1Pen ........................................................................................7
2.2Mapping .................................................................................8
2.3Function ...............................................................................11
2.4About us ..............................................................................13
3.FAQ ..........................................................................................15

1.General Information
1.1Overview
1.2 System Requirement
Welcometothe VEIKK!Thisuser manualwillhelpyousetuptheVK1560and installthedriver.
Either you are a beginner or professional, this one can satisfy your requirement .For the driver,
please download from http://www.veikk.com/download
Windows 10/8.1/8/7/Vista/XP(32/64 bits)
Mac OS 10.8 or later.
1.3 Hardware Specification
1

1.4 Display Connection
Note 1:WerecommendyouinserttheVEIKKUSBcabletothehostUSBportofyourcomputer. You
mayuseaUSBhubwithanattachedexternalpowersupplytoadequatelypoweryourVEIKKifneeded.
Note 2:Makesureyourcomputersupportsmultiplemonitors.CheckifyourcomputerhasextraHDMI
ports.Ifyourcomputerhasanindependentvideocard, pleaseusetheHDMIportsthere.
Note 3:Ifthere isn’t any input signal,itmeansthetabletdoesn’t receiveHDMIvideoinput.Please
reconnect the HDMI cable, or change another HDMI cable or change another computer to have a try.
2

1.5 Installation on Windows
1. Before installing driver, please uninstall all tablet drivers from your computer, and keep all
antivirus program closed
2. Connect the tablet to your computer before installation
3. Please download updated driver from www.veikk.com
4. Unzip downloaded file to desktop, open the new unzipped folder
5. Click VK TabletDriver.exe and follow onscreen instructions
3

6. After installation then restart your computer.
4

1.6 Monitor Mapping
How to Change to Extended Display
Extended Display means you work with a larger Windows desktop area spanning your computer
monitor and your VK1560 LCD Display. Applications can be moved from one display to the other,
and will allow you to work in different screen resolutions.
1. Right-click your desktop and select Screen Resolution.
2. In Multiple Displays dropdown, change to [Extend these Displays]
3. If your computer is equipped with more than one monitor, your VK1560 pen display will map to
the monitors based on how they are configured in the DISPLAY PROPERTIES control panel.
4. After you have correctly configured your computer for multiple monitors, you can then adjust your
VK1560 pen display mapping by opening the driver icon and changing the appropriate
options. This enables you to toggle the current VK1560 mapping and screen cursor between the
system desktop or primary display and your other monitors.
5

1.7 Specification
Note: Under the Duplicate display mode of the Multiple Display function, the display
resolution of your monitor must be set to the same resolution as your VK1560.
Otherwise, your pen cursor will be misplaced on the screen. For VK1560, please
make sure the other monitor resolution is set to 1920x1080.
ProductDimension
ActiveArea
Pen
DPI
PenPressure
Resolution
DataReportRate
ReadingHeight
ContrastRatio
Brightness
443mm(L)x241mm(W)x23mm(H)
293.76mm(L)x165.24mm(W)11.5x6.5inch
Battery-freePassivePen
1920x1080
8192levels
5080LPI
230pps(points/second)
10mm
700:1
300(cd/m2))
6

2.VK1560 Pen Display Configuration
2.1 Pen:
2.1.1 Pen Function Settings
You may customize the functions of your
tablet pen’s barrel buttons here. Use the
“Function Key” option to program custom
keystrokes.
2.1.2 Current Pen Pressure
Current Pen Pressure shows the current
pressure level being exerted on your tablet
and can be used to test pen pressure.
7

2.1.3 Click Sensitivity
You can adjust pen pressure to “Output”
or “Press” sensitivity on here.
2.2 Mapping
Define the tablet area that will be mapped to the screen area.
2.2.1 Monitor Setting
Here you can adjust the monitor colour temperature and parameter.
8

2.2.2 Rotate
It can freely rotate the pen display, and satisfy left hand users .
9

2.2.3 Screen Mapping
If working in Extended Display, choose which monitor you want your VK1560 pen display
to track with. Most likely, you will want it to track with the VK1560 display.To learn which
monitor is Monitor 1 and which is Monitor 2, Please go to Start > Settings > Display and click
Identify.
2.2.4 Calibration
Click Start Calibration to activate the calibration screen. Press crosses appearing on the
screen one by one with the P68 pen to calibrate the screen.
2.2.5 Enable Windows Ink Function
Microsoft Windows provides extensive support for pen input. Pen features are supported in
such as Microsoft Office、Adobe Photoshop CC、AI and so on.
10

Note: Software keystrokes are based on English input methods. If not already, set
to English when using Hotkeys on your VK1560 pen display.
Note: Most creative software will not accept keystroke inputs when you P68 is still
in use or when your P68 is still within the detectable cursor range. To avoid invalid
keystroke actions, hold the pen away from the screen before pressing your Fast
Access button. (Hold P68 at least 1.5cm away from the surface of the screen.)
2.3.1 Hotkeys
Redefine Hotkey: Click on the title of the button. A dropdown menu will appear with a
list of tool options. Choose the one you want to use.Custom Define: At the bottom of
the dropdown menu, choose Custom. This will allow you to input a custom keyboard
shortcut.
2.3 Functions
Customize the Fast Access Buttons and Dial from Function Tab.
11

2.3.2 Dial
You can define 5 functions to the Dial. Tap on Dial button to select the function you would
like to use. To switch between functions, press down on the edge of the Dial. You will see
the function name briefly at the bottom of the screen when switched.
12

2.4 About Us
Check for updating: If you want to install the newest driver, click ”Check for updating ”,if
there is no response, that means the driver you installed is the newest ;if you find newest
driver in the list, you just need to update.
13

Note:Driver settings in Mac system are the same in Windows system. Users who use
Mac system can refer to Windows system.
Mac:
Diagnostic Tools: Check for missing key files
14

(1).Pleaseuninstallandcompletelyremovealltabletdriversfromyourcomputer.
(2).Disableanyanti-virusprotectionprogramsuchasFirewall.(Windows)Makesurethatyou
areinstallingthedriverasthe Administrator.
(3).Pendisplay:Pleaseconnect HDMIcable,Powercable/adapter,andUSBporttothe
computerandVEIKKpendisplay.IfyourcomputervideoportisnotHDMIport,youshouldbuy
atransfertool,likeVGAtoHDMIorDVItoHDMI.Pentablet:PleaseconnectUSBcabletothe
computerandVEIKKpentablet.
(4).DownloadthelatestdriverfromVEIKKwebsite:http://www.veikk.com/download
(5)Thenfollowtheinstructions:WindowOS:Pleaseexecute"VKTabletDriver"andfollowthe
promptstoinstall.Whenthedriveriscompletelyinstalledyouwillseeanicon“ ”appearing
onthesystemtray(lowerrightcorner).MacOS：Openthefilelist,find“MacDriver”andrun
executionfile .Followitsinstallprocedure/steps,thenrebootthesystem.
(6).Rebootthecomputer.
(7)Whenthedriveriscompletelyinstalledyouwillseeanicon“ ”appearingonthesystem
tray(lowerrightcorner).Oncecompleted,thedigitalpenshouldbeincontrolofthecursor,
andactivatedforconfigurationonthepressuretestarea.
3.FAQ
1.HowtoinstalldriverforveikkPendisplay/PenTablet?
Please visit theVEIKKwebsite to download the current updated driver version:
http://www.veikk.com/download
2.How do I update my software to the newest driver?
Windows:
Run‘Control pannel-----Run‘program’-----choose’VKTabletDriver’----follow the unload tips
until unloading is finished.
Mac:
(1)Open’Finder’-----’Application’-----’Pen tablet Setting’-----’Uninstall PenTablet Driver’
3.How to uninstall driver?
15