Veilux VRHD-8-4SDI User manual

Veilux VRHD-8-4SDI Operating Instruction & User’s Guide
www.Veilux.net
1
FCC Compliance Statement
Model Name: VRHD-8-4SDI
This device complies with Part 15 of the FCC Rules. Operation is Subject to the following two conductions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operations.
WARNING
Unauthorized reproduction of all or part of this manual is strictly prohibited.
The figures in this manual are for illustration purposes only (may differ from the actual product).
The specifications and design of the product are subject to change without prior notice for purposes of
quality improvement.
CAUTIONS
To get the best use out of the product, be sure to read the cautions before using the product. For safety, please
take note of the following.
Instructions before using the product
1 To prevent electric shock when installing, moving, or opening the DVR and peripheral devices, connect
and disconnect the cables as instructed. All cables must be connected to grounded power outlets.
2 If the product is installed near a power outlet, make sure it can be unplugged easily.
3 Do not use the DVR in water or in wet places.
4 Keep the plastic packing materials used for the DVR or other peripheral devices out of reach of children
(may cause suffocation).
Installation Environment of the DVR
1 Maintain the following conditions: operating temperature of 5˚C ~ 40˚C; operating humidity of 10% ~ 80%.
2 Install the DVR in a safe place that is free from external vibration.
3 Install the DVR in a well-ventilated place.
4 To protect the hard disk from data loss and breakdown, install the DVR away from magnetic materials.
5 When using a rack other than the standard one, use a separate table with sufficient spacing, i.e., 60cm
from the floor, 50cm from the ceiling, and 20cm from the side and back walls and other objects.
Safety Notes on the DVR
1 When installing additional boards and HDD, separate the power cable and turn OFF power supplied to the
DVR completely..
2 Keep the product away from heat-generating devices such as heaters.
3 Do not use a damaged power cord.
4 To prevent problems due to magnetic interference and electric surge, use only grounded cables and
power outlets.
5 If the power cord is connected, do not touch the power unit. If the power cord is connected, electric current
is still flowing internally even after the switch is turned OFF.
6 Do not place a heavy object on top of the product.
7 Do not drop a conductive object in the ventilation holes.
8 Allot sufficient space for system cabling.
9 Use only the parts indicated in the manual. Do not disassemble, repair, or modify the product without
permission.
10 Incorrect system setup may cause malfunction.
11 Shut down the system normally as instructed in the manual.
Safety Notes on the Lithium Battery
1 Replace lithium batteries as instructed to avoid danger.
2 Dispose used lithium batteries properly.
【Warnings and Cautions are indicated as follows】
Possible injury or product damage
Risk of minor injury or product damage
Cautions for the usage of the product

Veilux VRHD-8-4SDI Operating Instruction & User’s Guide
www.Veilux.net
2
Information for the usage of the product

Veilux VRHD-8-4SDI Operating Instruction & User’s Guide
www.Veilux.net
3
CONTENTS
CONTENTS
Chapture 1. Introduction
１-２Veilux VRHD-8-SDI series Major Features ............................................................ 6
１-３About the Product........................................................................................... 7
１-５ Components .................................................................................................. 7
Chapter 2. Installation and Connection........................................................8
１-７Veilux VRHD-8-SDI Series Front Pan.................................................................. 8
１-７-１Veilux VRHD-8-SDI Series Front Panel..................................................................8
１-７-３Veilux VRHD-8-SDI Channel Rear Panel...............................................................8
１-８Installation and Connection .............................................................................. 9
１-８-１Basic Connection................................................................................................ 10
１-８-２Connection of Other Devices................................................................................. 10
Chapter 3. Operation and Setup Tools ....................................................... 11
１-９-１Veilux VRHD-8-SDI series Front Panel Button........................................................ 11
１-９-２Veilux VRHD-8-SDI series Remote Controller ....................................................... 13
１-９-３Mouse .............................................................................................................. 13
Chapter 4. DVR Operation Setup .............................................................. 13
１-１１Veilux VRHD-8-SDI Series Storage Installation ................................................ 13
１-１２ Power ON. ................................................................................................ 15
１-１３ Storage Setup ........................................................................................... 15
１-１４ Recording Setup........................................................................................ 15
１-１５ Date/Time Setup ....................................................................................... 16
Chapter 5. System Operation................................................................... 16
１-１６ Starting System and Exiting the System ........................................................ 16
１-１７ Monitoring ................................................................................................ 16
１-１７-１Screen Division and Auto Sequence .................................................................... 16
１-１７-２Zoom (x16)................................................................................................... 16
１-１８ System Login ............................................................................................ 17
１-１８-１User Account and Authorization.......................................................................... 17
１-１８-２Login............................................................................................................. 17
１-１８-３Logout........................................................................................................... 17
１-１９ System Information View and Display Setup Change....................................... 18
１-２０ System Information .................................................................................... 19
１-２１ Display Setup ............................................................................................ 20
１-２２ Audio, Relay, Spot control .......................................................................... 20

１-２３ Search ..................................................................................................... 21
１-２３-１Calendar Search.............................................................................................. 22
１-２３-２Time Index ..................................................................................................... 22
１-２３-３List All ........................................................................................................... 22
１-２４ Log Viewer................................................................................................ 23
１-２５ Playback .................................................................................................. 24
１-２５-１Playback status and Playback Speed Control ........................................................ 24
１-２５-２Smart Search.................................................................................................. 25
１-２５-３MULTI TIME ................................................................................................... 25
１-２５-４MULTI DAY .................................................................................................... 25
１-２５-５Event............................................................................................................. 25
１-２５-６Panorama Playback ......................................................................................... 25
１-２６ Backup .................................................................................................... 25
１-２７ Snapshot .................................................................................................. 26
１-２８ Log Backup .............................................................................................. 26
１-２９ Setup Backup ........................................................................................... 26
１-３０ PTZ Camera Control................................................................................... 27
Chapter 6. Setup ................................................................................... 28
１-３１ Time ........................................................................................................ 28
１-３２ Definition.................................................................................................. 29
１-３２-１Camera.......................................................................................................... 29
１-３２-２PTZ............................................................................................................... 29
１-３２-３Event Source .................................................................................................. 29
１-３２-４Relay............................................................................................................. 29
１-３３ Action ...................................................................................................... 29
１-３３-１schedule (schedule1 - schedule4) ....................................................................... 30
１-３３-２Event............................................................................................................. 30
１-３３-３Recording....................................................................................................... 30
１-３３-４Alarm ............................................................................................................ 30
１-３３-５Duration......................................................................................................... 30
１-３３-６Log ............................................................................................................... 31
１-３４ Schedule .................................................................................................. 31
１-３４-１Holiday setup.................................................................................................. 31
１-３５ Storage .................................................................................................... 32
１-３５-１Max. Recording Days........................................................................................ 32
１-３５-２HDD Overwrite................................................................................................ 32
１-３５-３Local Storage Management ............................................................................... 32
１-３６ Network.................................................................................................... 34
１-３６-１Ethernet......................................................................................................... 34
１-３６-２DDNS............................................................................................................ 34
１-３６-３Port............................................................................................................... 34
１-３６-４E-mail............................................................................................................ 34
１-３６-５Bandwidth ...................................................................................................... 34
１-３６-６Callback......................................................................................................... 34
１-３７ System..................................................................................................... 35
A/P/P/E/N/D/I/X ..................................................................................... 36
4 Veilux VRHD-8-4SDI Operating Instruction & User’s Guide
www.Veilux.net

Veilux VRHD-8-4SDI Operating Instruction & User’s Guide
www.Veilux.net
5
(1) Recommended HDD
........................................................................................... 36
(2) Recommended PTZ Camera Protocol. .................................................................... 36
(3) Recommended USB2.0 Device ............................................................................. 36
Figure List
[Figure 2-1. Veilux VRHD-8-SDI Basic Connection and Device Connections…………………......... 9
[Figure 2-2. Veilux VRHD-8-SDI Basic Connection and Device Connection] ...................... 9
[Figure 2-3. Terminal Block Description]................................................................................ 11
[Figure 4-4. Menu Window] ................................................................................................ 15
[Figure 4-5. Storage Device New Tab menu].......................................................................... 15
[Figure 5-6. Recording Status Window]................................................................................. 18
[Figure 5-7. DVR Infomation].............................................................................................. 19
[Figure5-8. Search Window] ............................................................................................... 22
[Figure 5-9. Log Viewer] .................................................................................................... 23
[Figure 5-10. Playback Screen] ........................................................................................... 24
[Figure 5-11. Playback Status and Control bar] ...................................................................... 24
[Figure 5-12. Backup]........................................................................................................ 25
[Figure 6-13. Date and Time Window] .................................................................................. 28
[Figure 6-14. Definition Window].......................................................................................... 29
[Figure 6-15. Action Window].............................................................................................. 30
[Figure 6-16. Pre/post alarm].............................................................................................. 31
[Figure 6-17. Schedule Window].......................................................................................... 31
[Figure 6-18. Storage Window]............................................................................................ 32
[Figure 6-19. Ethernet Window]........................................................................................... 34
[Figure 6-20. System Setup Window] ................................................................................... 35

Veilux VRHD-8-4SDI Operating Instruction & User’s Guide
www.Veilux.net
6
１-１SH2 series Major Features
VRHD-8-4SDI
System
Reliable Standalone DVR
Channel type
4 BNC - HD-SDI
4 BNC - SD Analog
OS
Embedded Linux - Built in Flash Memory
Video Input
8 BNC
Video
output
Monitor
1 VGA, 1 HDMI, 1 BNC TV OUT
Spot
1 BNC
Audio Input
Line Input : 4 RCA
Audio Output
Line Output : 1 RCA
Compression Format
[Video: Standard H.264)] / [Audio: G.711]
Recording Speed
Max. 45fps@720p
Recording Resolution
Max. 720p
Recording Mode
Automatic, Continuous, Manual, Events(Sensor and Motion, Sound)/Schedule
Recording
Storage
Internal
[Internal: Max. 2HDD, Max. 4TB]
External
1 eSATA
Video Output
Resolution
HDMI : Full HD(1080p), HD(1080i), WSXGA,SXGA
VGA : WSXGA (1680x1050), SXGA(1280 x 1024),
TV : SDTV(720 x 480/576)
Sensor Input
4 Sensors
Relay/TTL Output
[1ea NC/NO]
Backup & Copy
Access
USB2.0, Network
Network Access
Various Network Interface
(Ethernet 10/100/1000, ADSL, Cable modem)
PTZ Access
2ea of RS485
System Operation &
Adjustment
Front Button, Mouse, IR Remote Controller, Keyboard Controller, Network
System Upgrade
USB2.0 Memory Stick, Network
Network
System Automation (Controlled by VMS)
NTP Supported
VMS / WEB Brower / PDA / Smart Phone
Others
18Languages Supported, Automatic E-mail
Power [12V/5A] / Max. Power Consumption[40W] / Operating Temperature [5 ~
40℃]
Weight without HDD [3kg] / Dimension [340 ⅹ58 ⅹ300mm]

Veilux VRHD-8-4SDI Operating Instruction & User’s Guide
www.Veilux.net
7
１-２About the Product
As a digital image monitoring equipment that can display images inputted from up to 8 cameras, VRHD-8-4SDI
digitally records high-quality images using various video recording modes and displays them as clean quality
images.
For users’convenience, front panel button, remote controller, and mouse are provided. Powerful network
functions including remote monitoring and remote system setup modification are also supported.
１-３Differences between MH2/SH2 series
VRHD-8SDI
DVD
NO
Front Button
14 Buttons
USB port
Right side of the front panel
Dimension
COMPACT SIZE
１-４Components
Please check the components after unpacking the product.
-Remote controller
-CD (CMS, CMS Manual, PDA Viewer Software)
-AAA 1.5V Batteries 2es
-Adapter (12VDC/ 5A)
-User Manual

Veilux VRHD-8-4SDI Operating Instruction & User’s Guide
www.Veilux.net
8
Chapter 2. Installation and Connection
１-５VRHD-8-4SDI Front Panel
SH2 series has the buttons which is simple and easy and the various interfaces on the rear panel.
１-５-１VRHD-8-4SDI Front Panel
１-５-２VRHD-8-4SDI Channel Rear Panel
No.
Name
Function
Type
1
DC-IN Power
100~240V, 50/60 Hz, 3.5A
2
CONFIGURE
Select the type of video input and output
Switch
3
RS485
DIO
PTZ Camera Control Connection
Sensor/ Relay Connection
Termnal Block
4
Ethernet
Network Connection (ADSL, Cable Modem, Ethernet 10/100/1000
Base-T)
RJ-45
5
HDMI
HDMI Video output
HDMI type-C
6
eSATA
External SATA Storage
eSATA
7
VGA-OUT
VGA Monitor or LCD Monitor connection
D-SUB 15P
8
AUDIO OUT
Audio output connection (Line Only Output)
RCA
9
AUDIO IN
Audio input connection (Line Only Input)
RCA
10
CAMERA IN
HD-SDI Camera connection
BNC
11
SPOT
SPOT Video output / CCTV monitor connection
BNC
12
TV
CCTV Monitor Connection(Divided Screen)
BNC
13
CAMERA IN
SD Camera connection
BNC

www.Veilux.net
１-６Installation and Connection
[Figure 2-1. VRHD-8-4SDI Basic Connection and Device Connection]
[Figure 2-2. VRHD-8-4SDI Basic Connection and Device Connection]
9 Veilux VRHD-8-4SDI Operating Instruction & User’s Guide

Veilux VRHD-8-4SDI Operating Instruction & User’s
10
Guide
www.Veilux.net
１-６-１Basic Connection
By referring to above [Figure 2-1] and [Figure 2-2], Connect the CCTV camera, CCTV monitor (or VGA monitor),
and USB mouse to the DVR and set up CONFIG SWITCH.
Connecting Device
DVR Terminal
1
CCTV camera
Rear Panel Video Input
2
CCTV monitor
Rear Panel TV
3
VGA Monitor / LCD Monitor
Rear Panel VGA-OUT
4
Mouse
on Front Left side
5
CONFIG SWITCH
Rear Panel NTSC/PAL or VGA/TV Setup
Refer to the CONFIG SWITCH description as below.
1. The input video type must be either NTSC or PAL; these two types must not be used together.
2. Select the input video format (NTSC/PAL) using the CONFIG switch on the rear side of the product.
3. Should select one between 1080p and 720p for input resolution. These two types must not be used
together. 8Ch DVR is setup 720P regardless of video input. (Please Note that the Veilux 8CH DVR will
only go up to 720P not 1080P. Even if switches are configure correctly.)
１-６-２Connection of Other Devices
Connect the PTZ controller cable, audio in/output, network and sensors as below.
Connecting Device
DVR Terminal
1
SPOT Monitor(CCTV Monitor)
Rear Panel SPOT
2
Mike / Speaker
Rear Panel Audio Input / Audio Output
3
LAN Cable
Rear Panel Ethernet
4
PTZ Camera
Rear Panel Terminal Block
5
Sensor / Relay / TTL OUTPUT
Rear Panel Terminal Block)
6
Key controller
Rear Panel Terminal Block
1) SPOT Monitor
Connect Spot Monitor to the spot connector on the rear panel.
2) Audio In/Output
Audio supports 4 inputs and 1 output.
3) Terminal Block
Terminal Block on the rear panel is for the connections of PTZ / Sensor / Relay.

Veilux VRHD-8-4SDI Operating Instruction & User’s
11
Guide
www.Veilux.net
[Figure 2-3. Terminal Block Description]
4) PTZ Camera/Keyboard Controller
Connect PTZ camera to TRX+(No.4) and TRX-(No.5) and GND(No.10). You may refer to APPENDIX for
supported PTZ camera list in this manual. Keyboard Controller has same connection way of PTZ camera.
PTZ Camera may not be working properly if GND is not connected.
5) Sensor/Relay
Connect Sensor/Relay to Terminal Block directly.
(1) Sensor Connection
①Connect Sensors to the Terminal Block S1 ~ S4.
②Each input terminal may be connected regardless of the channel number.
Sensor has the type of NC(Normal Close) and NO(Normal Open).
For Setup {Menu} {Setup} {Action} {Event} {Sensor Type}
NC(Normal Close) : Normally closed; opens when a signal is received.
NO(Normal Open) : Normally opened: closed when a signal is received.
(2) Relay Connection
①Outputs alarm signals to external devices such as siren by relaying them to these external devices.
②Connect Relay to R1 of Terminal Block (TB1).
Relay has the type of NC(Normal Close) and NO(Normal Open).
For Setup {Menu} {Setup} {Action} {Alarm} {Relay Type}
NC(Normal Close) : Normally closed; opens when a signal is received.
NO(Normal Open) : Normally opened: closed when a signal is received.
Chapter 3. Operation and Setup Tools
１-６-３SH2 series Front Panel Button
No.
Name
Feature
1
POWER
Power On/Off
2
MOVE & DISPLAY
Move from one category to another or change the display
mode
3
ESC
Exit the current menu or selects the upper menu
4
MENU
Various Modes

Veilux VRHD-8-4SDI Operating Instruction & User’s
12
Guide
www.Veilux.net
5
MODE
Menu for display mode
6
PLAY
Playback/Fast Forward (in Playback mode)
7
Frame byFrame
Playback Frame by Frame (in Playback mode)
8
PAUSE
Pause (in Playback mode)
9
Reverse Frame by Frame
Backward Playback Frame by Frame (in Playback mode)
10
Reverse Play
Backward Playback/Rewind (in Playback mode)
11
IR Sensor
Remote controller input sensor
12
POWER LED
LED indicating Power On/Off
13
RECORD LED
Green LED turned on upon HDD operation
14
Our Logo
Veilux Logo
15
USB
[Side] USB Mouse, USB Memory Stick Connection Port

Veilux VRHD-8-4SDI Operating Instruction & User’s
13
Guide
www.Veilux.net
POWER
Turn the system power
ON or OFF.
ESC
Exit the current menu
or select the upper menu
MENU
To see the Menu
MODE
None usable
SELECT
Select the category or execute
automatic screen conversion
MOVE
Move from one category to another or
change the display mode
１-６-４VRHD-8-4SDI Remote Controller
a) Basic Control Button
POWER MODE
M E NU
E S C
b) Search Button (Playback Mode)
Reverse Play
Reverse Play
Play
Play
Reverse Frame by Frame
Reverse play frame by frame
Pause
Pause
Frame byFrame
Play frame by frame
１-６-５Mouse
Operate the system by using Mouse. The mouse pointer will be shown when a Mouse is connected to USB port
on the front panel.
Mouse control supports the features as below.
Click on the right button
Monitoring Mode / Move from Play Mode to
Monitoring Menu / Pop up or remove Play Menu.
Show sub-folder of the certain Menu window.
Click on the left button
Select Menu.
Double click on the left
button
Select Menu.
Drag the left button
Move a certain window.
Chapter 4. DVR Operation Setup
１-７VRHD-8-4SDI Storage Installation
※The recommended HDD specification are shown below.
Type
Size
Capacity
Buffer
RPM
SATAI, II
3.5“ 1, 2 Flat
Max.2TB
Over 8MB
Over 7200

Veilux VRHD-8-4SDI Operating Instruction & User’s
14
Guide
www.Veilux.net
1) Open the top case by using screw driver.
1) Normal termination of the system and fully unplugged power code
are required before conducting HDD installation.
2) Touch a grounded metal substance or ground yourself before
installing HDD in order to reduce static electricity. Static electricity may
cause a malfunction of the product.
3) After installing HDD, Do not connect to power supply with the top
case opened. The top case must be covered before usage.
2) Unscrew and separate the HDD bay from body.
3) Screw the additional HDD bay to current HDD bay
4) Connect HDD to HDD connector on the main board directly without cable.
Reassemble the top case by reversing 1) to finalizing HDD installation.

Veilux VRHD-8-4SDI Operating Instruction & User’s
15
Guide
www.Veilux.net
１-８Power ON.
①Check the adapter (12VDC/3.5A) and connect the power.
②Booting will be initialized after pressing the power button on the front panel.
③Menu widow pops up by clicking the right button of the mouse or pressing [MENU] button in the fr
ont panel as shown below.
Default ID and PW is as below
[ ID: Local Admin, PW: 00000 ]
[Figure 4-4. Menu Window]
１-９Storage Setup
①{Menu} {Setup} {Storage} {Local Storage Management} {New}
②Select the HDD on New tap and then select Recording-Init.
[Figure 4-5. Storage Device New Tab menu]
③{Recording-Init} means that it is initializing for recording.
④After initializing done, HDD on New tap will be moved to Recording tap.
{Recording-Init} procedure may take time.
Refer to [6-4 Storage] for better understanding about storage.
１-１０Recording Setup
①{Menu} {Setup} {Action} {Recording}
②Setup for [Recording Resolution]/[Recording Quality]/[Recording Speed]/[Audio].

Veilux VRHD-8-4SDI Operating Instruction & User’s
16
Guide
www.Veilux.net
1
2
3
4
5
6
7
8
１-１１ Date/Time Setup
①{Menu} {Setup} {Time}
②Setup for time
Chapter 5. System Operation
１-１２ Starting System and Exiting the System
①Press the power button with the power connected.
②All channels connected to cameras will be displayed after booting is completed.
③The system will be terminated after authentication is completed,
１-１３ Monitoring
１-１３-１Screen Division and Auto Sequence
Full Screen(8 groups)
●●●
1 2 3 8
Use the Full Screen mode button or double click the channel you want
4Sub-Screen (2 groups)
1
2
5
6
3
4
7
8
Use the 4Sub-Screen button.
9Sub-Screen (1 group)
Use the 9Sub-Screen button.
Auto Sequence
①Rotating images (channels) with the certain time.
②Select the certain time (1 sec.~10 sec.) on {Menu} {Miscellaneous} {Setup}
③Auto sequence is starting after pressing the select button or icons on the status bar as below.
１-１３-２Zoom (x16)
Zoom in & out for specific zone on live display.

Veilux VRHD-8-4SDI Operating Instruction & User’s
17
Guide
www.Veilux.net
①Move to the Zoom mode by selecting the icon on the status bar thru Mouse.
②Control the Zoom by using the up/down buttons or Mouse.
③Menu for zoom will be disappeared after pressing ESC button or the left button of the Mouse.
１-１４ System Login
１-１４-１User Account and Authorization
Local Admin
The local administrator has all authorities. (But, remote access is not available)
Default password is [00000]
User
Up to 15 users are allowed. Each user can access the functions depending on the
given authorities.
For Authorization Setup, Move to {Monitoring Menu} {Setup} {System}
{4. User Registration}.
１-１４-２Login
For security purpose, user must log in first.
①Select {Menu} {Login} on the live display.
②Password for English can be shown after selecting the space of password.
１-１４-３Logout
After logout, user can’t use menu.
①Select {Menu} {Logout} on the live display.

Veilux VRHD-8-4SDI Operating Instruction & User’s
18
Guide
www.Veilux.net
１-１５ System Information View and Display Setup Change
Audio/Recording Status/Channel Title/Connection Indicator/Time/HDD status are displayed as shown below.
[Figure 5-6. Recording Status Window]
※Recording Event / Recording mode display ※
Recording
Event
Motion recording
Sensor recording
Audio recording
Recording
Mode
Video recording
Audio recording
※Live Display ※
Video is not connected or Video is covert
Audio is set activated
Audio is set silent
No Signal
Camera has been disconnected
The channel for PTZ setup
The channel for PTZ tour1 setup
The channel for PTZ tour2 setup

Veilux VRHD-8-4SDI Operating Instruction & User’s
19
Guide
www.Veilux.net
※Control Bar※
①
1Ch display mode
②
4Ch display mode
③
8Ch display mode
④
Zoom
⑤
Auto Sequence
⑥
Date / Time
⑦
HDD Status
⑧
Playback
１-１６ System Information
①Select {Menu} {Miscellaneous} {DVR info.}
②DVR info. Will be displayed as shown below.
[Figure 5-7. DVR Infomation]