Velodyne SubContractor SC-ICG User manual

In-Ceiling Grille
SubContractorTM Series
USER’S MANUAL

WWW.VELODYNE.COM SC-ICG User’s Manual - i

WWW.VELODYNE.COM SC-ICG User’s Manual - ii
TABLE OF CONTENTS
Congratulations. .......................................................1
Installation Instructions ..................................................2
Specications .........................................................6
Velodyne Products .....................................................7

www.velodyne.com SC-ICG User’s Manual - 1
CONGRATULATIONS
Congratulations on your purchase of a Velodyne in-ceiling grille. The Velodyne in-ceiling grille is for use with the
SC-IF/IC (In-Floor/In-Ceiling) or SC-600 IF/IC subwoofers. Read and follow this instruction manual to ensure
safe and proper installation.
Prior to Installation
Please unpack the grille carefully. Please save the carton and all packaging materials for future use.
Warning
Before installing the Velodyne in-ceiling grille, have the subwoofer location established. Avoid rafters, pipes
and cabling when installing sub and grille. Please refer all service questions to your authorized Velodyne dealer.
Remember to perform all installation procedures with system power turned off to prevent possible damage.
Tools Needed
• Drill or Phillips screwdriver
• Phillips drill bit (if using a drill)
• Box knife
• Staple gun
• Sheetrock saw
• Paint applicator
• Paint

www.velodyne.com
2 -SC-ICG User’s Manual
INSTALLATION INSTRUCTIONS
Retrot
1. Determine the center position for the subwoofer installation location.
2. Puncture a small hole through the ceiling material at the corresponding driver center location.
Figure 1. Position the SC-600 In-Ceiling template on desired installation location.
3. Center the SC-ICG cut-out template to the hole created in the previous step.

www.velodyne.com SC-ICG User’s Manual - 3
4. Cut the ceiling material along the solid line noted on the template, following the outer diameter of the
circular template.
Figure 2. Cut ceiling material along specied solid cut-line.

www.velodyne.com
4 -SC-ICG User’s Manual
5. Insert the paint template into the in-ceiling grille basket. Paint the grille basket ange to match decor.
6. After the paint has dried, remove the paint template and insert the in-ceiling grille basket into the hole in
the ceiling material.
Figure 3. Install the basket ange into the cut-out ceiling material.

www.velodyne.com SC-ICG User’s Manual - 5
7. Push the backside of the basket ange ush with the ceiling material, and tighten the four screws on the
basket engaging the clamps. The four screws should be hand tightened, or torqued to 4 inch pound.
8. Carefully push the aluminum grille into the groove on the grille basket. Ensure that the ange and the
grille edge are ush.
Figure 4. Push the SC-600 In-Ceiling Grille into the grille basket.
New Construction
1. Designate a suitable location for for the installation of the Velodyne in-ceiling subwoofer, during the
framing construction. Mark the driver location by stapling the mud ring template across the ceiling
beams centered at the designated location.
2. Using the cut-out template, cut a hole in the ceiling material to match the mud ring location.
3. Install the sheet rock. Do not remove the mud ring.
4. Follow the “Existing Construction Installation” steps 5-8 to complete the installation of the grille.

www.velodyne.com
6 -SC-ICG User’s Manual
SPECIFICATIONS
SPECIFICATIONS SC-600 In-Ceiling Grille
Frame High strength ABS plastic
Grille Paintable aluminum alloy
Grille Dimensions 12”
Cut-out Dimensions 11”
Warranty (parts/labor) Five years (for normal usage)
Shipping Weight (approx.) 5 lbs. (2.3 Kg)
NOTE: If you need to le a warranty claim for your product, you will still need to submit to Velodyne the original
sales invoice or other proof of ownership and date of purchase.
Please validate your product warranty by completing the warranty registration online within 30 days at:
velodyne.com/warranty-subwoofers
For detailed warranty information, please visit us online at:
velodyne.com/warranty-subwoofers
The warranty information indicated above refers to products purchased in the United States and Canada only.
If you purchased your product outside of the United States or Canada, please consult your local authorized
Velodyne dealer for warranty registration and information.

www.velodyne.com SC-ICG User’s Manual - 7
VELODYNE PRODUCTS
120V
DD®Series
DD-10
DD-12
DD-15
DD-18
Digital Drive 1812 Signature Edition
DEQ-R Series
DEQ-8R
DEQ-10R
DEQ-12R
DEQ-15R
DLS™-R Series
DLS-3500R
DLS-3750R
DLS-4000R
DLS-5000R
Impact Series
Impact - Mini
Impact -10
Impact -12
MicroVee®
MiniVee®
SMS™-1
SPL™-R Series
SPL-800R
SPL-1000R
SPL-1200R
SPL-1500R
SubContractor™Series
SC-1250
SC-8
SC-10
SC-12
SC-15
SC-IW
SC-IF/IC
SC-600 Amp
SC-600 IW
SC-600 IF/IC
VX™Series
VX-10
230V
DD®Series
DD-10
DD-12
DD-15
DD-18
Digital Drive 1812 Signature Edition
CHT-Q Series
CHT-8Q
CHT-10Q
CHT-12Q
CHT-15Q
Impact Series
Impact - Mini
Impact -10
Impact -12
MicroVee®
SMS™-1
SPLi Series
SPL-800i
SPL-1000i
SPL™-R Series
SPL-800R
SPL-1000R
SPL-1200R
SPL-1500R
SubContractor™Series
SC-1250
SC-8
SC-10
SC-12
SC-15
SC-IW
SC-IF/IC
SC-600 Amp
SC-600 IW
SC-600 IF/IC
VX-10 Series II

Velodyne Acoustics, Inc.
345 Digital Drive
Morgan Hill, CA 95037
www.velodyne.com
408.465.2800 voice
408.779.9227 fax
408.779.9208 service fax
Service E-mail: [email protected]
Product E-mail: [email protected]
Technical E-mail: [email protected]
SC-ICG-RevA_MAY2012