Venini VECE6005 Operating instructions

ELECTRIC HOBS
USER AND INSTALLATION
INSTRUCTIONS

Dear Customer,
Congratulations on purchasing your new product from Think Appliances.
To register your parts and labour warranty (some conditions apply please refer to your
warranty card for more details) please contact out Customer Care team on:
1800 444 357
Our Customer Care centre is there to ensure you get the most out of your appliance. For
example, should you want to learn more about recommended cooking temperatures, the
various cooking functions available, how to set and program your LED clock, and importantly
taking care of your appliance when cleaning, please call us because we are here to help you.
It is important that you read through the following use and care manual thoroughly to
familiarize yourself with the installation and operation requirements of your appliance to
ensure optimum performance.
We also carry a complete range of spare parts for all Think products. For all your spare parts
enquiries please contact our team at Pronto Parts on:
1300 306 973
Again, thank you for choosing an appliance brought to you by Think Appliances and we look
forward to being of service to you.
Kind regards
Management
Think Appliances

For future reference please record the following information which can be
found on the Rating Plate and the date of purchase which can be found in the
invoice:
Model Number …………………….
Serial Number …………………….
Date of Purchase …………………….

CONTENTS
General Information Page 4
Warning Safety Instructions Page 5
Instructions for Use Page 6---7
Instructions for Installation Page 8--10
Technical Data Page 11
3

GENERAL INFORMATION
Please read this booklet thoroughly before you use this appliance. It is important that you
understand all the control functions before commencing to cook with your Venini appliance.
Please remember the advice and warnings shown on page 5 which is headed
‘IMPORTANT – Warning and Safety Instructions’.
This appliance is designed for domestic household use when built into kitchen worktop.
NOTE: The housing, adjacent furniture and all materials used in the installation must be able to
withstand a minimum temperature rise of 85°C above ambient during periods of operation. This
information is for guidance only and the actual withstand temperature will depend on the
performance rating for the surface finish of the worktop.
Certain types of kitchen furniture surface finishes are particularly prone to heat damage or
discolouration at temperatures lower than the above guidelines.
Installing the appliance in contravention of the guidance given will be at the liability of the
owner.
The use for any other purpose or in any other environment without the express agreement of
Venini would invalidate any warrantee or liability claim.
Your new appliance is guaranteed against electrical or mechanical defects subject to certain
exclusions noted in Venini Conditions of Guarantee.
The aforegoing does not affect your statutory rights.
For Warranty conditions in Australia please consult the enclosed Cucina Australia Warranty card,
or call Cucina National Service on 1800 444 357.
Before using this appliance ensure that any protective packaging or coatings have been removed.
To aid the protection of the environment, please sort the packing materials into different types
and dispose of them in accordance with the local waste disposal laws.
Any further information on waste disposal can be obtained from your local Environment Agency office.
When first used, an odour may be emitted by any residual protective finish or moisture, which
will cease after a short period of time.
This appliance has been constructed and distributed in compliance with the essential requirements
of the following EEC DIRECTIVES, EUROPEAN NORMS and Australian Standards:
CE Marking – 93/68 Low Voltage – 73/23 EMC – 89/336
Materials that can touch food – 89/109.
Safety Standards – EN 60 335-1, EN 60 335 – 2 – 6, AS/NZS3350-1, AS/NZS3350-2-6
As Venini have a policy of continued product improvement, the right is reserved to adjust and
make any modifications deemed necessary without notification.
4

IMPORTANT NOTE – WARNING and SAFETY INSTRUCTIONS
This appliance complies with all current European and Australian safety legislation,
however
Venini do wish to emphasise that compliance does not remove the fact that surfaces
will become hot during use and retain heat after operation.
Venini advise that the appliance is not intended for use by young children and infirm
persons without supervision.
Young children should be supervised to ensure they do not play with the appliance.
If it is necessary for younger family members to be in the kitchen, please ensure that
they are kept under close supervision at all times.
We also advise that great care is taken during use and cleaning operations.
Warning : in case of disassembly, maintenance and cleaning of the appliance, be
careful.
Please use suitable prevention and protection equipment
Do make sure that the pan handles are always correctly positioned to avoid accidental
contact.
Do not leave heated oil or fat unattended as there is a risk of fire.
Do use pans that are flat bottomed and the correct size for the heating area to be used
(never smaller).
Do not allow electrical fittings or cables to be in contact with hot areas of the
appliance.
Do not use the appliance for space heating or to dry clothes.
Do not install the appliance next to curtains or soft furnishings.
NOTE: This appliance must be correctly installed by a suitably qualified person,
strictly in accordance with the manufacturer’s instructions.
Venini declines any responsibility for injury or damage to persons or property
as a result of improper
use or installation of this appliance.
Heat, steam and moisture will be created during use, take care to avoid injury
and ensure that the room is adequately ventilated. If prolonged use occurs,
additional ventilation may be required – please consult your Qualified Installer if
you are in any doubt about the amount required.
5

INSTRUCTIONS FOR USE
These user instructions should be retained for future reference and for use by a person who is
perhaps unfamiliar with the appliance.
The following models are covered by these instructions:
VSEC
VSEC.2
VECE6005 VECE6008
USING ELECTRIC HOTPLATES
The symbol on the control panel fascias show which hotplate the control system operates. A pilot
light indicates when a hotplate is switched on
.
When using an electric hotplate for the first time or after a long period of disuse, turn the knob to
1 and let it heat for about 20 minutes to eliminate any possible moisture absorbed by the internal
insulating material. NOTE: An amount of smoke will be observed during this initial burn in, this
is normal
- Dry the bottom of the pan before placing it on the hotplate.
- Turn the hotplate on only after placing the pan on it.
The hotplates are controlled by a 7 position knob (from 1 – 6. Turn the knob anti-clockwise to the
desired setting. A warning light on the control panel will inform you if the plate is on or off.
Suggested settings (guide):
Position Heat Intensity Use
0. Off
1. Very slow For melting butter, chocolate, etc. For heating small amounts of liquid
2. Low For heating large amounts of liquid. For preparing slow-cooking
creams and sauces
3. Medium-low For thawing frozen foods and cooking stews, cooking at boiling or
lower temperatures
4. Medium For boiling foods, roasting delicate meats and fish
5. High For braising chops and steaks, for large meat soups
6. Very high For boiling large amounts of water and frying
ENERGY SAVING TIPS
The diameter of the saucepan must be the same or slightly larger than that of the electric hotplate.
Never use a pan which is smaller than the electric hotplate.
- Use flat-bottomed pans only
- Preferably cover pans with a lit to permit cooking at a lower heat
- Always cook vegetables and potatoes etc. in as little water to reduce cooking times
6

WARNING
• Do not use commercial simmering aids as these can create excessive heat that can
damage the appliance
• Do not leave hotplates on without a pan or an empty pan
• Be aware that hotplates will retain heat whilst cooling down
• When cooking foods with high sugar content, ensure that any spillage is removed
immediately to avoid damage to the cooktop surface.
HELPFUL HINTS
• Always use the correct diameter pan, one that is the same or slightly larger than the
hotplate.
• The bottom of the pan must be flat
• Whenever possible keep the lid on the pan while cooking
• Avoid over-spill of liquid by reducing the heat when boiling has occurred
CLEANING THE APPLIANCE
Always allow the appliance to cool down before cleaning to avoid a burn injury
SOLID HOTPLATES – VSEC
/ VSEC.2 / VECE
The hotplates should be lightly greased with oil (using a soft cloth). This will ensure that the
surface remains clean and will also prevent formation of rust.
7

INSTRUCTIONS FOR INSTALLATION
This appliance must be installed by a competent person in accordance with the current version of
the following Regulations and Safety Standards or your local Regulations and Safety Standards.
Venini Installation Instructions
In Australia the installation must comply with AS/NZS3000 wiring rules.
POSITIONING THE APPLIANCE
This appliance is classified as Class 3 and therefore is to be built into a kitchen unit (depending
on size) or 600mm worktop, providing the minimum distance is allowed.
- 650mm between the top surface and the underside of any horizontal surface above it.
- 50mm clearance around the appliance and any combustible materials
The surface of any adjacent unit must be capable of withstanding a minimum temperature rise of
85ºC.
PRE-COMMISSING THE APPLIANCE
When unpacked, check that the following parts are included with the appliance
• Venini Instructions and Installation booklet
• Adhesive sealing agent and fixing clamps & screws
8

INSTALLATION NOTES
1 Cut the aperture to the dimensions shown in the table below or use the template provided
on the packaging.
2 Invert the hob and apply the sealing agent provided to match the outer perimeter edge.
3 If the sealing agent is a strip type, the protective covering must be removed from both
sides. Do not leave a gap in the sealing agent or overlap the thickness.
NOTE: do not use any Silicone based sealant, as this can damage the worktop surface if
repairs are required.
4 Insert the appliance into the aperture and fix into position via the clamps & screws,
tightening the screws evenly (see fig.3.)
Fig.3.
9

ELECTRICAL CONNECTION
This appliance must be installed by a competent person, such as one holding NICEIC Registration
and in accordance with the latest edition of the IEE WIRING Regulations.
Before connecting the appliance, make sure that the supply voltage marked on the rating Plate
corresponds with the mains supply voltage.
In Australia the appliance must be installed by a qualified electrician in accordance with
AS/NZS3000 wiring rules.
WARNING – THIS APPLIANCE MUST BE EARTHED
Depending on the Power Input of the model to be installed, connection will require a 32Amp
protected supply using a switched double pole isolating unit having a minimum 3mm contact
separation. (see Technical Data at page 11 for full information).
Care must be taken to avoid the cable being in contact with hot parts of the appliance.
The isolating unit should be placed in an easily accessible position adjacent to the appliance.
NOTE
The appliance must not be connected to the mains supply by means of a 10A plug and
socket.
MAINTENANCE
During the guarantee period, in case of need all service intervention should be referred
back to the Venini Service Department. Please note that intervention or repair by any
unauthorised personnel will invalidate such guarantee.
10

TECHNICAL DATA
ELECTRICAL DETAILS
Rated Voltage: 240V ac 50Hz
Supply Connection: Switched Double-pole Isolator with 3mm contact separation
POWER INPUTS AND PROTECTION RATING
Model kW Amp Pr otection Reting
Max Total Min Fuse
Mains Supply Connection Cable: 3 x 2,5mm2 type HO5 V2V2-F <HAR>marked
NOTE:
For cable connection details, see diagram on appliance base plate.
VSEC 6.0 30Amp 32Amp
VSEC.2 5.025Amp 32Amp
VECE6005 5.0 25Amp 32Amp
VECE6008 5.0 25Amp 32Amp
11