Vera VistaCam 702 User manual

Quick Start Guide
Full HD Indoor Wi-Fi Camera
VistaCam 702

Congratulations on
choosing the VistaCam 702
You’ve taken the next step toward
making your home safer and your
life easier.
It’s easy to set up your camera.
Here’s what you need to do.

If you haven’t already set up your era
controller, please do that rst. There are
instructions on how to do so accompanying
the controller.

Plug in your istaCam 702. When the LED
begins blinking blue, it’s ready to be added
to your era system.

Follow the prompts in your era app to set
up the camera.

That’s it! Your istaCam 702 has been set up.
The LED will now ash slowly. You can turn it o
in the camera's seings.

eed help seing up?
You can reach our Customer Care team seven
days a week at 866.966.2272 between 6am and
10pm US CST/EST*
or at [e-mail]
You can also purchase our era Easy Start
service and get one hour of personalized setup
assistance through a phone call with one of our
most experienced agents. isit getvera.com to
learn more.
*Customer Care available 6am-10pm CST during
Non-Daylight Savings Hours; and 6am-10pm EST
during Daylight Savings Hours
Camera model istaCam 702 is designed for
indoor use.
FCC Information
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference
received, including interference that may cause
undesired operation.

ote: This product has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This product generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this product does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment o and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment
and receiver.
—Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
—Consult the dealer or an experienced radio/T
technician for help. Please take aention that changes
or modication not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.
This equipment should be installed and operated with
a minimum distance 20cm between the radiator and
your body.
:         
 .
       .
    .

You’re now ready to enjoy smarter
home control.
© Ezlo Innovation 2020