Verity Audio Lakme User manual

© 2019 Verity Audio Incorporated
This manual is copyrighted by Verity Audio Inc. with all rights reserved. Under the copyright laws, this manual may not be reproduced in
any form, in whole or part, without prior written consent of Verity Audio Inc.
Information contained in this manual is subject to change without notice. Verity Audio has reviewed this manual thoroughly in order
that it will be an easy-to-use guide to your Verity Audio loudspeakers. All statements, technical information and recommendations in
this manual or any related documents are believed reliable. The accuracy and completeness thereof are not guaranteed and they are not
intended to be, nor should they be understood to be, representations or warranties concerning the products described. Your loudspea-
kers have been sold to you subject to the limited warranty set forth in the warranty card enclosed with your product.
Lakmé
OWNER’S MANUAL
Release 2.0
June 2020

LAKMÉ
R2.0
OWNER’S MANUAL
June 2020
VERITY AUDIO PAGE 2
Content.....................................................................2
Safety Instructions ................................................ 3
Using this Manual.................................................. 4
Product Overview.................................................. 4
Features and Benefits........................................... 4
Description.............................................................. 4
LAKMÉ ...................................................................... 4
Packing and Unpacking ........................................ 4
Installation ...............................................................5
Isolation Base...........................................................5
Room Placement ....................................................5
Room Treatment ................................................... 6
Content
Ancillary Equipment...............................................7
Power Handling.......................................................7
Cabinet Resonance.................................................7
Care of the Finish....................................................7
Maintenance............................................................7
Troubleshooting..................................................... 8
Customer Support................................................. 8
Specifications.......................................................... 8
Limited Warranty................................................... 9
Notes........................................................................ 9

LAKMÉ
R2.0
OWNER’S MANUAL
June 2020
VERITY AUDIO PAGE 3
Safety Instructions
In these safety instructions the word "product" refers to the Verity Au-
dio LAKMÉ and all its accessories.
1. Read Instructions - All the safety and operating instructions
should be read before the product is operated;
2. Retain Instructions - The safety and operating instructions
should be retained for future reference;
3. Head Warnings - All warnings on the product and in the
owner's manual should be followed;
4. Follow Instructions - All operating and maintenance instruc-
tions should be followed;
5. Cleaning - Unplug this product from your power amplifier
before cleaning. Do not use liquid or aerosol cleaners. The product
should be cleaned only as recommended in this manual;
6. Accessories - Do not use accessories not recommended in
this manual as they may be hazardous;
7. Water and Moisture - Hazard of electric shock - Do not use
this product near water or in rainy / moist situations;
8. Heat - Avoid placing the speakers near a heat source;
9. Sun - Exposing your product to direct sunlight may alter the
color of your product;
10. Placing or moving - does not place on an unstable cart,
stand, tripod, bracket, or table. The product may fall causing se-
rious injuries, and serious damage to the product. A product with
cart combination should be moved with care. Quick stops, exces-
sive force, and uneven surfaces may cause the product cart com-
bination to overturn;
11. Power amplifier - Hazard of electric shock - Do not manipu-
late, move, clean or disconnect your product while your power
amplifier is turned on;
12. Moving when Packed - The product comes packed in two
double cardboard boxes. These boxes are heavy and cannot be
carried by a single person. Attempting to move a transportation
box alone could cause serious injuries;
13. Input power - To reduce the risk of fire or electric shock, do
not allow an input power over 150 watts rms (30.0 volts rms) to
the product;
14. Unpacking and Packing Instructions - The product should
be packed and / or unpacked only as indicated on the packing/
unpacking instruction sheets;
15. Ancillary equipment - Do not connect or play the product
before making certain that the associated equipments are in good
condition;
16. Object and Liquid Entry - Never push object of any kind into
this product through openings as they may touch dangerous vol-
tage points or short out parts that could result in a fire or electric
shock. Do not spill liquid of any kind onto or into the product;
17. Servicing - Do not attempt to service the product yourself.
Refer all servicing to qualified service personnel;
18. Damage Requiring Service - Turn off your power amplifier(s)
and disconnect all cables from the product, and refer servicing to
qualified service personnel under the following conditions:
a. When the product exhibits a distinct change in performance;
b. If any liquid has been spilled into, or objects have fallen into,
the product;
c. If the product has been exposed to rain or water;
d. If the product does not operate normally even if you follow
the operating instructions. Connect only your product as re-
commended in your owner's manual. Improper connections
may result in damage and will often require extensive work
by a qualified technician to restore the product to its normal
operation;
e. If the product has been dropped or the cabinet has been da-
maged.
19. Replacement Parts - When replacement parts are required,
make sure the service technician use only original parts as speci-
fied by Verity Audio. Unauthorized substitution may result in fire,
electric shock or other hazards;
20. Safety Check - Upon completion of any service or repairs to
this product, ask the service technician to perform safety checks
to determine that the product is in safe operating order.
To reduce the risk of shock, do not expose this
product to rain or moisture.
Your product is a passive device. Risk of electric shock is
only possible when it is hooked up to a power amplifier.
To reduce the risk of electric shock, do not open the
product and remove no user serviceable parts inside. Refer
servicing to qualified personnel.
Do not make any changes or modifications to the product
unless otherwise specified in this manual. If such changes
or modifications should be made, you could be required
to stop operation of the product or lose your warranty
privileges.

LAKMÉ
R2.0
OWNER’S MANUAL
June 2020
VERITY AUDIO PAGE 4
Using this Manual
Please take the time to carefully read this instruction manual prior to
installation or use of your LAKMÉ loudspeaker. Your reading efforts will
be rewarded by the satisfaction of getting a full performance achieve-
ment and a long service life. We believe that a thorough understanding
of your new loudspeakers can save you a lot of anxiety.
This manual will guide you for setting up and operating your loudspea-
kers and will teach you how to unpack, repack, clean and service your
product. Furthermore, we have included a few informative sections for
the benefit of your own LAKMÉ familiarization.
We are pleased to count you among the most privilege owners of a
unique product that will yield a very enjoyable experience for years
to come.
Product Overview
Your new LAKMÉ is a mature-engineered high-quality audio com-
ponent. The LAKMÉ brings a substantial improvement to any audio
system and gives its full potential when associated with the finest an-
cillary equipment.
The LAKMÉ is based on the same cabinet construction principles as all
Verity Audio’s acclaimed loudpseakers. It uses carefully selected qua-
lity components that integrate harmoniously in a complete floor-stan-
ding loudspeaker that will give hours of enjoyment.
The result is a high-quality loudspeaker that gives a great sense of live-
liness, scale, and presence in the listening space. Your LAKMÉ, without
any doubt, will sound naturally even throughout a wide frequency
spectrum and dynamic range.
Features and Benefits
The LAKMÉ‘s ability to reproduce music with a high degree of sound
intelligibility comes from many useful features.
Consistent Uniformity
Very strict and sophisticated Verity Audio CAM system (computer
aided matching) provides a wide soundstage imaging stability.
Effortless Neutrality
Proprietary low-distortion, high-headroom transducers with highly
inert cabinet topology allows for a great musical integrity.
Graceful Adaptability
Modest-size cabinets make the installation easy and effective in any
environment.
Long-lived Reliability
Strong manufactured components with high-reliability finishing for
years of enjoyment.
Spacious Bottom-End
Outstanding transducer displacement uniformity along with a unique
cabinet tuning offers a dynamic and full-bodied bass performance.
Exquisite Finishing
Splendid high-quality finishing of sumptuous texture and impeccable
coating that will last for years.
Compact Design
Accommodating size with no performance impairment that grants
dazzling sound in any listening environment.
All these features synthesize Verity Audio’s commitment for bringing
the music back to its essence: «Pure and exalted emotions».
Description
The Verity Audio LAKMÉ loudspeaker will give outstanding results with
a wide variety of equipment. They have been designed to offer outs-
tanding performance in moderate size rooms. Their design renders
a highly accurate and focused image, an amazing blend of lightning
speed and sweetness as well as a cathedral soundstage.
LAKMÉ
The LAKMÉ is a 3-way system that integrates one woofer drivers wor-
king in parallel with two passive radiators increasing the LAKMÉ overall
dynamic range and allowing to reproduce low frequencies; a proprie-
tary wide-bandwitdth midrange transducer covering the most critical
human ear frequency spectrum; and a soft ring-dome tweeter capable
of extended frequency range. The crossover used in your LAKMÉ com-
bines 1st. order slopes between the woofer and midrange units and
3rd. order slopes between the mids and high frequency units.
Just like all Verity Audio loudspeakers, The LAKMÉ works with the room
reinforcement characteristics to produce quick and solid bass perfor-
mances. Despite its small size, the LAKMÉ loudspeaker provides a low
frequency extension down to a deep 35 Hz.
The midrange, woofer and passivie radiators have been optimized for
maximum cone rigidity without breakup resonance. These special units
are offering a low level of distortion, extended dynamics range, high-
power handling, and simple dividing network.
The tweeter has been specifically designed to give extended, natural
and resonance free reproduction of the harmonic content of all musical
instruments. These units have been integrated with a very carefully
designed crossover that allows each driver to deliver its full potential.
Moreover, all components used are carefully computer-matched and
indexed to enable optimum sound staging performance.
Packing and Unpacking
Before they left the factory, your LAKMÉ cabinets passed an exhaus-
tive quality control procedure to guaranty their genuine state. Please
observe carefully the inlcuded unpacking instructions for maximum
product safety. Once your LAKMÉ cabinets will be unpacked, inspect
them carefully for any physical damage. If any transit damage can be
noticed, please notify your dealer immediately and request the car-
rier’s name so a written claim can be initiated.
Your LAKMÉ comes packed in a double cardboard box complete with
all the necessary protection accessories. For transportation purposes,

LAKMÉ
R2.0
OWNER’S MANUAL
June 2020
VERITY AUDIO PAGE 5
we strongly recommend you to keep and store all your packaging hard-
ware.
Unless the carrier is notified promptly and all the shipping cases are
available for inspection, the right to claim can be forfeited.
Installation
This section depicts how to assemble and connect the LAKMÉ louds-
peaker.
To identify a proper location for the installation of your LAKMÉ, please
refer to the Room Placement section of this manual or follow the re-
commendations of your dealer.
Once the speakers are properly installed, connect them to the am-
plifier using quality speaker cables. Make sure that the polarities are
respected at both ends and that your cables are installed in the proper
direction. The positive input is identified by either the (+) sign or red
connector and the negative input is identified by either the (-) sign or
the black connector located on the connector plate.
For vacuum tube equipment that has multiple output impedance taps,
the eight-ohm taps should provide the best interface with the LAKMÉ.
Floor Isolating Tripod
Your LAKMÉ loudspeakers sits on top of a floor isolation tripod which
improves their acoustic performance by controlling undesired stray
energy. Your floor isolation tripod contains special materials that act as
an acoustic resonator and filter. It rests on three adjustable cushioned
feet for stability and leveling.
Once the speaker lies on the floor, it is best to level it by properly
adjusting the three feet. No tool is required: simply rotate clockwise
or counter-clockwise the knurled section of each feet. Each foot can
be adjusted individually, which allows you to level the unit even if it
stands on an uneven floor. We recommend you use a level to make
sure the unit is properly aligned.
The feet of the floor isolation stand are cushioned, allowing you to ea-
sily slide your LAKMÉ around your listening room by gently pushing or
pulling them. Do not do it from the top, as the speaker might tip over.
Push it from the base instead. Unlike the spikes that are the industry
standard, the cushioned feet of Verity floor isolation stand do not da-
mage floors and allow you to easily and quickly move your loudspea-
kers. You can thus easily adjust the placement of your speakers inside
your listening room or move them around if need be.
Please note that a unit may no longer be leveled after it is moved.
For your speakers to deliver their best performance, we recommend
that you double-check whether your unit remains leveled after being
moved, then adjust the feet of the floor isolation stand to restore the
proper alignment if necessary.
Room Placement
Indoors, acoustic intelligibility is of great concern for a variety of rea-
sons. It requires low background noise levels and “good” acoustical
design. In any room, the reverberant sound pressure level increases as
the acoustic power increases and decreases as sound absorption in the
room increases and / or sound power flows from the room. The sound
field in a room is composed of two parts, the direct field and the re-
verberant field.
The complex theories of physical acoustics, the uncertainties in predic-
ting the property variations of both natural and manufactured room
materials, and the none negligible effects of painting, sealing, bracing,
furring, and draping all keep the specification and prediction of room
acoustics from being an exact science. Adding together, loudspeaker
characteristics, the auditory personal taste and ergonomics make, by
practical means, the equation impossible to solve. The frequent need
to evaluate the final result by listening rather than by purely quantita-
tive methods gives acoustical tuning a somewhat subjective aspect.
Nevertheless, knowing what the LAKMÉ is capable of doing will be
your major asset in establishing the best setup for your loudspeaker.
Here are a few simple rules that will guide you. A good setup will give
you fast transients from the bottom end to top-end, proper image
height and a wide and deep soundstage.
Having that in mind, the following guidelines are based on our own
experience with the LAKMÉ. We recommend that you start with these
and later on (after getting familiar with your LAKMÉ) bring your own
modifications that will optimize your setup.
First, the distance from the rear wall to the speaker woofer (dust-cap
center) should be equaled to the length of your room multiplied by
0.1459. Then the distance from the side wall to the speaker woofer
(dust-cap center) should be equaled to the width of your room multi-
plied by 0.1459. Finally, your listening position should be width-cente-
red and the distance from the rear wall to your ears should be equaled
to the length of your room multiplied by either 0.1459, 0.2360 or
0.3819.
Note that the above method should be considered as a rudimentary
guideline. Loudspeaker room placement is an art in itself and the best
setup will most likely require trials and errors . For best results, we
simply recommend that you contact Verity Audio (info@verityaudio.
com) and ask for advice. Our acousticians are knowledgable and will
propose a few loudspeaker placements according to your room spe-
cifications and restrictions. We have been helping our customers for
years in finding the best location for their loudspeakers. Please note
that there is no distance limitation with the rear woofer and back wall,
simply make sure that the vent clearance is more than 8-inches.
We suggest that you start with the speakers aligned directly at you.
Then open them (angle increase) slowly until you get the best sounds-
tage without losing too much center-stage definition. In most cases,
the left speaker should be aligned toward your left shoulder and the
right speaker should be aligned toward your right shoulder. Opening
them will improve your image width and closing them will improve
your image center definition.

LAKMÉ
R2.0
OWNER’S MANUAL
June 2020
VERITY AUDIO PAGE 6
Room Treatment
The LAKMÉ gives its best performance in an average-furnished domes-
tic listening room. It requires a minimum of room treatment. Before
investing in room treatment we strongly recommend you to take the
time to listen and get familiar with your speakers. The LAKMÉ has pro-
ven to be a standalone loudspeaker that rarely needs to be acousti-
cally corrected. A good room placement is usually the most effective
approach.
You should always start to position your speakers without any treat-
ment. If speaker positioning cannot solve standing waves or reverbera-
tion problems read the following.
The principal design factor for internal acoustics of a room, in addition
to shape and size, is the control of sound absorption and reflection.
The total absorption required to give optimum reverberation is inhe-
rent to your room characteristics, i.e., which surfaces are absorptive
or reflective, the area of these surfaces and the selection of acoustical
materials.
A flutter echo is a rapid (usually regular) succession of reflected pulses
resulting from a single pulse. Clapping your hands while walking in the
room can easily identify them. They are frequently located at the cei-
ling corners or at the center of the ceiling-wall intersections. If flutter
echoes are prominent, please consult your dealer to get proper assis-
tance on that matter.
The reverberation in the room is the resulting tendency for sound level
in the room to persist after direct sound ceases. The optimum reverbe-
ration time for a room depends upon room volume, sound frequency,
and the type of sound or reproduced music. The LAKMÉ performs at its
best in lively listening rooms. Overly damped room will be detrimental
to the LAKMÉ’s performance. Optimum reverberation time (at 500 to
1,000 Hz) should be between 0.4 and 0.6 second.
Standing waves are reflections from opposing parallel surfaces resul-
ting in serious peaks in the reverberation-time / frequency curve. In
properly proportioned rooms, resonances can be effectively reduced
and standing waves practically eliminated by introducing numerous
sound treatment devices. The object is to prevent sound reflection
from going back to the point of origin until after several reflections
and/or after being considerably attenuated. Once again if you feel ha-
ving a standing wave problem in your room, please consult your dealer
to get proper assistance on this matter.
Early reflections are the first sound reflections heard at the listening
position. They are usually intense and annoying. In order of impor-
tance, they usually come from the floor, the sidewalls and the ceiling.
Placing diffusors or absorbers at their image location can either control
them. Your dealer can be of good assistance in properly helping you
with this matter.
Fig 1

LAKMÉ
R2.0
OWNER’S MANUAL
June 2020
VERITY AUDIO PAGE 7
In an already well-damped room, we recommend utilization of diffu-
sion instead of damping.
If you choose to work with a specialized room treatment device, the
included manufacturer’s instructions should be followed.
Ancillary Equipment
Your new LAKMÉ is an extremely precise instrument that can clearly
reveal the qualities of your upstream equipment. Your LAKMÉ perfor-
mance will be closely related to the excellence of its associated equip-
ment. Subsequently, it would be wise to invest in high-quality ancillary
equipment, as your enjoyment will be consequently rewarded.
The LAKMÉ shows an easy impedance load for most power amplifiers.
It has been evaluated with a wide variety of power amplifiers and has
shown consistent results with quality solid state and vacuum tube
equipment. Superb performance can be realized from either design.
The high quality binding-posts on the Verity Audio LAKMÉ accept ba-
nana plugs, spade connectors or bare wires. For best results, we recom-
mend the use of spade connectors.
When choosing speaker cables, experimentation is the best way to find
which ones will be the most satisfying in your installation. Your Verity
Audio Dealer can be of assistance in making recommendations.
Power Handling
The power tolerance of a loudspeaker is correlated to its maximum
voice-coil heat dissipation and to its maximum cone displacement.
These parameters are in turn stimulated by the time, amplitude and
spectral characteristics of the applied musical energy. At low frequen-
cies, the maximum cone displacement is normally reached before
maximum voice-coil temperature.
With the LAKMÉ’s transducers, because of their superior ventilation
system, the voice-coils will most likely never reach critical tempe-
ratures. But, low frequencies played at high levels can ask for larger
cone displacement than allowed by the driver suspension. A driver rea-
ching its maximum displacement will not break unless this situation is
maintained for an inordinate period of time. Before a driver reaches its
maximum displacement, its distortion level will increase greatly and
will become audible. So when a speaker starts sounding bright and
hard or if any “cracking noise” can be heard, just lower the level until it
sounds comfortable again.
The LAKMÉ has to be played unexpectedly loud before any occurrence
of compression or distortion appears.
Cabinet Resonance
Cabinet resonances are controlled in a very special way. Their ampli-
tudes are lowered and their frequencies are increased. Because higher
frequencies are more directional, it will be most unlikely that they get
the chance to reach the listening point. Of course, the listening room
has to be properly treated. Also, traveling high-frequency sonic waves
attenuate faster than their low frequency counterpart. A unique cabi-
net bracing arrangement can break a wall resonance into multiple hi-
gher frequency resonances that are not harmonically related. By doing
so, their amplitudes are greatly reduced. The cabinet construction to-
lerances are so tight that only computer-controlled tooling can cut
panels with acceptable accuracy.
The cabinet rigidity lowers even more any chances of coloration caused
by unwanted vibrations. Special materials are used to ensure stability
of the cabinet in any acoustical environment.
Care of the Finish
The high quality finishing applied on the LAKMÉ is composed of high-
grade lacquer. You will only find them on luxury pieces of furniture.
They are long-lasting finishes and need little care.
Never use any solvent or abrasives to clean your speakers. To remove
fingerprints, use a lint-free cloth moistened with a few drops of water.
Yoy can dry clean your finish with a micro-fiber cloth. A window clea-
ner liquid can also be used with caution if necessary.
Maintenance
Verity Audio products are offering years of trouble-free performance.
If for any reason, your speaker needs servicing, contact your autho-
rized Verity Audio dealer or call the Verity Audio service department at
[phone] (North America) or email us at support@verityau-
dio.com. Help is available from Monday through Friday from 9:00
A.M. to 5:00 P.M. Eastern Standard Time (EST), except on holidays.
If you seem to have an operational problem, try to solve it by referring
to the information in the Troubleshooting section of this manual. If
you cannot quickly resume normal operation, contact Verity’s expe-
rienced support personnel at the above phone number.
Before contacting your Verity Audio authorized service representative,
make sure you have the following information in hand.
• Serial numbers
• Place of purchase
• Nature of the problem
• Steps you have taken to solve the problem and the obtained results
A return authorization number is required for servicing any of our pro-
ducts and it should be clearly identified on the packaging before any
shipment to our facilities. Every unit shipped without return authoriza-
tion number will be returned to sender.
Troubleshooting
This section describes how to solve common problems you may en-
counter when using your loudspeakers. Many problems have simple
solutions, so try these suggestions before you call your dealer or Verity
Audio support (see the Maintenance section of this manual).
This section contains problems and solutions related to the operation
of your hardware. Try the solutions in the order listed within each sec-
tion.

LAKMÉ
R2.0
OWNER’S MANUAL
June 2020
VERITY AUDIO PAGE 8
OPERATIONAL PROBLEMS
Make sure:
1. all your audio apparatuses are plugged into a power source and
turned on. Their respective power light indicators should be on;
2. every interconnect cable is connected properly and firmly;
3. every interconnect cable conduct signal normally;
4. your audio equipment selectors and controls are suitably adjusted
(source selector, volume control(s), mute selector, etc.);
5. your software (CD, LP, Tape etc.) is properly installed and current-
ly running;
6. the connections are secure and there are no leads touching each
other. See the Installation section for details about connecting
your loudspeaker.
SONIC PROBLEMS
Make sure:
1. every transducer is currently working and that none of them
seems to make any abnormal noises;
2. all polarities are respected and that all cables are properly ins-
talled;
3. every transducer is properly sealed and that no air leak seems to
occur around the transducers while playing.
The sonic performance is closely related to your room inherent cha-
racteristics, your speaker positioning and your ancillary equipment. We
recommend that you experiment with these to find the best solution.
For help, contact your dealer or your Verity Audio service representa-
tive at [phone] or email us at [email protected].
Customer Support
Verity Audio provides customer support and service for all Verity Au-
dio products. If you have any questions regarding your new loudspea-
ker, call the Verity Audio help desk at [phone] or email us at
[email protected]. Help is available Monday through Friday
from 9:00 A.M. to 5:00 P.M. Eastern Standard Time (EST), except on
holidays.
If you seem to have an operational problem, try to solve it by referring
to the information in the Troubleshooting section. If you cannot qui-
ckly resume normal operation, contact your dealer or Verity’s expe-
rienced support personnel at the help desk.
LAKMÉ Specifications
Bandwidth: 35 Hz to 25 kHz @ 3.0 dB
Woofer: 6-inch coated natural paper-pulp cone
with 3-inch symmetrical-drive voice-coil
Passives radiators: 2 x 6-inch coated natural paper-pulp cone
Midrange: 5-inch coated natural paper-pulp cone
Tweeter: 1-inch neo-ring dome
Power handling: 100 watts music power
Sensitivity: 91 dB @ 1w @ 1 m
Nominal impedance: 4 ohms
Minimum impedance: 3.6 ohms
Break in time: 75 hours (63%), 400 hours (99%)
Dimensions & Weights
Height: 41.5 in. (105.4 cm)
Width: 15.2 in. (38.7 cm)
Depth: 15.4 in. (39.2 cm)
Weight: 120 lbs (54 kg) / pair
Gross weight: 160 lbs (73 kg) / pair
Features
Connectors: Furutech
Tripod Isolation Feet Verity Audio thick aluminum tripod
Available finishes
Standard Satin White/Black cabinet with High-Gloss
Black/White front woofer panel
Special Order Wooden or Fabric Front Woofer Panel

LAKMÉ
R2.0
OWNER’S MANUAL
June 2020
VERITY AUDIO PAGE 9
Limited Warranty
Verity Audio products are covered by a limited warranty against de-
fects in material and workmanship for a period of five years from the
date of shipment to the authorized Verity Audio dealer.
The product shipped for services under this warranty shall be delivered
by the owner, along with a return authorization number clearly written
on the box. Products shipped without return authorization number will
be refused.
The included warranty registration card should be properly filled and
returned to the factory within ten (10) days from the date of purchase.
The registration can also be filled onloine at http://www.verityaudio.
com/en/online-registration
Damages resulting from negligence, misuse or accident, improper re-
pair procedures or alterations, or operation that is contrary to the ma-
nufacturer’s instructions are excluded from this warranty.
Unauthorized product aesthetic, operational or physical alteration(s)
that significanly modifies the performance of the product could void
the warranty.
Verity Audio reserves the right to modify or change the equipment,
all or in part, at any time, in order to include any refinements deemed
appropriate by Verity Audio.
This warranty is expressly in lieu of all other warranties, expressed or
implied and all other obligations or liabilities on the part of Verity Au-
dio. No other person (s), including dealer, agent or representative are
authorized to assume for Verity Audio any liability on its behalf or on
its name except to refer purchasers to the present warranty.
Verity Audio liability to any purchaser shall be to replace any part of
the product itself because of defective materials or workmanship, and
Verity Audio shall not be liable for any consequential damage as a re-
sult of defects in material or workmanship.
Notes

LAKMÉ
R2.0
OWNER’S MANUAL
June 2020
VERITY AUDIO PAGE 10