Verity Audio SM07F User manual

7 INCH WATERPROOF
QUAD MONITOR SYSTEM
Part # SM07F
A division of
Component Solution Services, LLC.
56600 Twin Branch Drive
Mishawaka, IN 46545
www.VerityRVs.com
Please read this manual completely before operating the SYSTEM
© Verity Rear Vision Systems
All rights reserved 2019

SM07F
Component Solution Services LLC., offers the Verity Rear
Vision System® to meet any requirement and price point
within the trucking, specialty vehicles, and RV industry. Verity
Rear Vision Systems® is also home to the Supreme View®
line of specialty format systems. Our standard cabled systems
offer unparalleled features into the trucking and RV industries.
Designed for professional drivers, Verity Rear Vision Systems
develops and markets products and applications to transmit
video, audio, and data either individually or in any and all
combinations. The company has also developed,
manufactured, and marketed different kinds of personal and
vehicle video cameras, DVRs, and accessories for the
commercial transportation, fire/rescue, and marine OEM
markets.

Think safety
Read our manual before operating
or installing.
Most likely, your system came pre-installed, so the installation
section would be for reference.
Thank you for your purchase of our Verity Rear Vision
Systems®. When installed and used properly, your SM07F is
designed to deliver you years of trouble-free operation. This
manual contains important information required to properly
install and operate the unit. Verity Rear Vision Systems are
designed for quick installation by trained professionals in
proper installation environments. Our designs are based on
decades of working with vehicle manufacturers.
Verity Rear Vision Systems products are intended to be
installed as a supplement and our observation systems and/or
products are not intended for use as substitutes for rear-view
mirror devices, or for any other standard motor vehicle
equipment which may be required to be installed on vehicles
by law. Verity Rear Vision Systems products promote
improving the vehicle operator’s field of view. Our products
are no substitute for proper defensive driving techniques,
observance of traffic laws and motor vehicle safety
regulations.
Installation Location
It is unlawful in most locals for any person to drive a motor
vehicle equipped with a television viewer/screen located at
any point forward of the back of the driver’s seat (or in any
location that is visible, directly or indirectly), to the driver while
operating the vehicle. Our systems are designed to be used
primarily as a rear observation device.
DO NOT OPEN ANY COMPONENT. There are no
serviceable parts inside any of the components of the Verity
Rear Vision Systems products. Opening the product will break
the tamper indicators and void the warranty. Contact our tech
support if a problem should arise 574-807-6002. For faster
response, fill out a service ticket found on our website.
www.verityrvs.com

WARNING
Do not place heavy objects on cables or cover
them with carpet or mats.
Do not place cables where they can be crushed
in any manner.
Our systems are designed as a driving aid.
Watching videos, broadcasts, DVDs and/or any
images other than intended driving assistance
cameras is prohibited.
CAUTION
To avoid damage to the electronic circuit, stop
using this product while doing welding work to
the vehicle and/or trailers.
Never immerse any component in water, and
do not employ spray cleaners. When cleaning,
use a damp, lint-free cloth only.
Connect this unit only to other compatible
devices.
Although our products have built-in surge and
cross polarity protection, make sure all cables
are connected properly; improper cable
connections may damage the camera and the
monitor.
Cables should not be allowed to touch hot or
rotating parts, such as the engine, ventilator,
etc.
Do not locate the monitor near heat generating
vents or devices.
Turn off power to the monitor when connecting
the camera.
Monitors are not designed to be waterproof. (Our
SM07F waterproof monitor is the exception).
Exposure to water, such as rain, may damage the
unit.

SYSTEM FEATURES
MONITOR SPECIFICATIONS
Screen size: 7-inch digital screen (16:9)
Monitor is waterproof with IP 69 rating
Long Life High Resolution: 800 ×480 Pixel (RGB)
Contrast: 500:1 Brightness: 400cd/m2
Power: DC 12V~32V reverse polarity protection
Operation temperatures: -20~70C Storage temperature: -
30~80C
Easy to use OSD menu function via touch screen reversing image
delay time 0~4s, (for side cameras) Mirror/Normal image, multi-
language, trigger wire activation
No sound due to the IP 69 rating
1 / 3” COLOR CCD CAMERA SPECIFICATIONS
Aluminum shelled waterproof camera with hex bolts for insured
positioning
Image Type: 1/3 Inch Color CCD Sharp® or equivalent -
(no cheap off brands used)
Horizontal Resolution: 420TV Lines
Illumination: 0Lux (built-in 24 IR LED's for night vision)
Viewing angle: 120°
Waterproof: IP69 Shockproof: 10G
Built-in heater
Operating temperature: -40°C to +70°C
Power supply: 12V DC (powered by monitor)

SYSTEM COMPONENTS
I/F Remote
Infrared Weatherproof Camera
20-Meter Camera
Cable
“U” Style Mount
7 Inch IP 69 Monitor
Panel
Sun Shield

SYSTEM MOUNTING
This monitor can be mounted on the dash and can be mounted
on both horizontal and vertical surfaces. Make sure the view is
suitable to the driver to observe the images. Take care not to
block any necessary viewing area when mounting. Before
mounting the system, permanently hook up all connections to
ensure proper operation.
Mounting Monitor
1. After determining the monitor location, position the
monitor support bracket, mark the bolt hole location, and then
drill the holes. Be careful not to drill into any other surface that
may be hidden.
2. Attach monitor bracket. Mount the monitor to the
support bracket with supplied hardware. When mounting the
monitor bracket be careful to check the area where you will
be setting the screws. Be sure you will not drill into items
such as other cables, dash air bags, etc. and the surface will
support the item being attached.
Camera Connection
Thru-wall Gasket To Seal
Thru Vehicle Exterior
Secondary Waterproof Sleeve
Slides Over Aviation Connection
Waterproof Aviation
Connectors

MONITOR / REMOTE OPERATIONS
1 2 3 4 5 6
MENU OPERATIONS
Main Menu Operations Sections
(1) Decrease button –For adjusting of Volume, Brightness,
Contrast, Language, Rotation, ……...
(2) Increase button –For adjusting of Volume, Brightness,
Contrast, Language, Rotation, …………
(3) MENU –Access Brightness, Contrast, Language,
Rotation, …………….
(4) CAM –Switches between all cameras connected to
Monitor.
(5) MODE –Selects Single View/Split view/Quad view
selectable Day & Night selects based on without split
function
(6) POWER –Turns monitor On and Off.
(7) Power indicator Light.
_
+
MENU
CAM
MODE
POWER
MAIN MENU
PICTURE
VOLUME
LANGAUGE
MIRRORING
VIDEO
OPTION 4
IMPERIAL ( FT)
PARK SETUP
INTERVAL CONFIG
CAM DELAY
EXIT

MENU OPERATIONS
1) PICTURE
Brightness, etc. can be set on a sliding scale
2) LANGUAGE
PICTURE
BRIGTHNESS
CONTRAST
COLOUR
RESET
RETURN
EXIT
BRIGTHNESS
IIIIIIIIIIIIIIIIIIIIIIIIllllIIIII……………………………… 50
LANGUAGE
ENGLISH
FRENCH
GERMAN
SPANISH
PORTUGUESE
ITALIAN
DUTCH
SWEDISH
RESET
RETURN
EXIT

MENU OPERATIONS
3) IMAGE MIRRORING
4) Video input (Video format)
5) OPTION
ROTATION OPTIONS
MIRRORING
CAMERA 1 [0FF]
CAMERA 2 [0FF]
CAMERA 3 [0FF]
CAMERA 4 [0FF]
RESET
RETURN
EXIT
OPTION
MODE OFF (SELECTS VIEW MODE)
SAVE MODE OFF (Save last view mode)
ROTATION RU
ZOOM 16:9
RETURN
EXIT
VIDEO
PAL
* NTSC
RETURN
EXIT

MENU OPERATIONS
6) IMPERIAL ( FT). This triggers between meters
and feet on main menu screen
7) PARK SET UP Each individual channel lines can be
set to the camera’s view. The guideline can be
expanded and moved up and down on the screen.
8) INTERVAL
8) CAM DELAY
PARK SETUP
LINE 1 SETUP
LINE 2 SETUP
LINE 3 SETUP
LINE 4 SETUP
LINE 1 ON
LINE 2 ON
LINE 3 ON
LINE 4 ON
RESET
RETURN
EXIT
INTERVAL CONFIG
CAM 1 5
CAM 2 5
CAM 3 5
CAM 4 5
RESET
RETURN
EXIT
INTERVAL CONFIG
CAM 1 2
CAM 2 2
CAM 3 2
CAM 4 2
RESET
RETURN
EXIT

CONNECTIONS
Verity Rear Vision Systems Wire Connection Key
4-pin camera connectors
Camera 1 Yellow 4-pin Green trigger
Camera 2 White 4-pin White trigger
Camera 3 Blue 4-pin Yellow trigger
Camera 4 Brown 4-pin Blue trigger
Red wire to key-on hot (+) 10-32v. DC (fused)
Black wire to GND. (-)
CAM 1
CAM 2
4-Pin Female
CAM 3
CAM 4

MENU OPERATIONS
1 Mode switches between image formats
2 Power
3 Menu opens on screen menu
4 Right left arrows volume up and down
5 Up / down arrows control menu section
6 CH1, CH2, CH3, CH4 switch cameras.

Verity Rear Vision Systems
A division of
COMPONENT SOLUTION SERVICES (CSS)
LIMITED ONE (1) YEAR WARRANTY
1. CSS products’ warranties are not transferable. The warranties apply to the
retail consumer for one (1) year and covers against defects in material and
workmanship.
2. Defective components will be replaced or repaired, based on a CSS
evaluation of the component. In-bound shipping charges, based on the CSS rate
allocated in the RMA (returned merchandise agreement), will be covered once
the component has been deemed defective at the CSS warranty facility. The
pre-assigned in-bound freight will be supplied upon return of product. All
repaired/replaced warranty parts shall be for the remaining duration of the
original warranty time period.
3. CSS takes pride in our products and will aid in the processing of your
components:
a) All warranty claimants must have consulted our technical support department
for trouble shooting and the acquiring of an RMA. Contact can be made via
email at [e-mail] or call 574-807-6002.
b) When the warranty claim is made, the consumer must establish the warranty
start dates by presenting documentation regarding the date of retail purchase
(e.g., bill of sale). If the warranty card was submitted it will establish the start of
the warranty term.
c) Service performed by non-authorized service personnel may void all warranty
claims.
d) CSS will make no payments for system removal / system re-installing, mileage
allowance, or transportation expenses.
The limited warranty does not cover damage resulting from misuse, accident,
modification or alteration to hardware or software, tampering, unsuitable physical
or operating environment beyond product specifications, improper maintenance,
or failure caused by a product for which CSS is not responsible. There is no
warranty for any product with removed or altered identification labels. CSS
DOES NOT PROVIDE ANY OTHER WARRANTIES OF ANY KIND,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR
CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OF
IMPLIED WARRANTIES, SO THIS LIMITATION MAY NOT APPLY TO YOU.
4. This warranty gives you specific legal rights, and you may also have other
rights that vary from state to state.

Technical Support
A service ticket can be filled out online to supply the quickest
service. The service ticket can be easly found on our web site
www.verityrvs.com or use the code to the right. Please have the
serial number of the system which is found on the back of the
monitor when contacting the service department. We take great
pride in delivering the most dependable product in the industry.
Each item was 100% QC tested and then we randomly recheck
another up to 10% before it leaves our hands to you. We have a
.034% issue rate with this product.
Email Tech Support: T[email protected]
Phone Tech Support: 574-807-6002
Note: if you are a fire/rescue customer in need of
tech support after hours or on weekends, leave a
message and a technician will return your call as
soon as one becomes available.
a division of
Component Solution Services
56600 Twin Branch Drive
Mishawaka, IN 46545
574-807-6002
Toll Free 844-875-4799
We at Verity Rear Vision Systems would like to
personally thank you for purchasing our
product. Our company strives to supply the
best products at a fair price. We care that you
enjoy a safe driving experience.
2019 Verity Rear Vision Systems
All content is copy right protected