Verkada ACC-MNT-MREC-1 User manual
Introduction
What’s in the box
What you’ll need
●CM42 Indoor Mini Dome Camera
●A T10 Torx Security Screwdriver
●A #2 Phillips screwdriver or power drill
with a #2 Phillips driver bit
●A utility knife
Compatible products
For a list of compatible products,
please visit:
https://docs.verkada.com/docs/
accessories-overview.pdf
3Verkada Inc. 406 E. 3rd Ave, San Mateo, CA 94401
All specifications are subject to change without notice
Copyright © 2023 Verkada Inc. All rights reserved.
Cover
Mounting Bracket Hole Cutout Template
Overview
4
Introduction
Verkada Inc. 406 E. 3rd Ave, San Mateo, CA 94401
All specifications are subject to change without notice
Copyright © 2023 Verkada Inc. All rights reserved.
Cover
Verkada Indoor
Mini Camera
with cover removed
(Sold separately)
Mounting Bracket
Order of assembly:
Ceiling
Up to 50mm
thickness
Mounting (1/3)
5
Installation
Identify the desired mounting
location on the ceiling and
adhere the Hole Cutout Template.
Cut a hole, following the outline of
the template, using a utility knife.
Thread the Ethernet cable
through the hole and the
mounting bracket.
Press the mounting bracket into
the cavity and hold it in place.
Tighten the two screws using a
#2 Phillips driver to secure the
mounting bracket to the ceiling.
Verkada Inc. 406 E. 3rd Ave, San Mateo, CA 94401
All specifications are subject to change without notice
Copyright © 2023 Verkada Inc. All rights reserved.
X2
6
Installation
Verkada Inc. 406 E. 3rd Ave, San Mateo, CA 94401
Mounting (2/3)
All specifications are subject to change without notice
Copyright © 2023 Verkada Inc. All rights reserved.
Retrieve the camera and
remove its outer shell and
mount plate. Set them aside.
Connect the Ethernet cable to
the camera.
Align the camera with the blue
indicator on the mounting
bracket. The three screws will
align with the holes on the
camera.
Press the camera into the
mounting bracket and twist to
attach.
Tighten the T10 retaining screw
on the camera to secure it in
place.
7
Installation
Verkada Inc. 406 E. 3rd Ave, San Mateo, CA 94401
Mounting (3/3)
All specifications are subject to change without notice
Copyright © 2023 Verkada Inc. All rights reserved.
Align the blue indicator on
the Cover with the blue
indicator on the camera,
and hold it in place.
Tighten the T10 security
screws on the cover to
secure.
Appendix
Support
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.
Thank you for purchasing this Verkada product. If for any reason
you're experiencing issues or need assistance, please contact our
24/7 Technical Support Team immediately.
Sincerely,
The Verkada Team
verkada.com/support
8
Table of contents
Other Verkada Rack & Stand manuals
