VESTEL OPSJ1900 User manual
DS PROJECTS
1
© APPLICATION ENGINEERING
OPS Presentation
Vestel Application Engineering Department
2017
DS PROJECTS
2
© APPLICATION ENGINEERING
Model Name OPSJ1900 OPSSL630 OPSSL650 OPSRK150 OPSQM330 OPSQM350 OPSATOM
CPU Intel® Celeron® J1900
Intel® Core™ i3-6100U,
Skylake-U SoC Intel® Core™ i5-6200U,
Skylake-U SoC RockChip
RK3188 Intel® Core™
i3-3120ME Intel® Core™
i5-3610ME Intel® Atom™ D2550
Chipset N/A N/A N/A N/A Intel® QM77 with vPro Intel® QM77 with vPro
Intel® NM10
Resolution
Support
Full HD Max.2560x1440
@60Hz Ultra HD, Max.
4096 x 2304
@24Hz
Ultra HD, Max.
4096 x 2304
@24Hz
Full HD Max.2560x1440
@60Hz Full HD Max.2560x1440
@60Hz Full HD Max.2560x1440
@60Hz Full HD Max.2560x1440
@60Hz
GPU Intel® HD Graphics Intel® HD Graphics 520 Intel® HD Graphics 520 MALI- 400 MP GPU up to
600
Mhz Intel® HD Graphics 4000 Intel® HD Graphics 4000 Integrated
Memory
2 x SO-DIMM DDR3L, Up
to
8GB
2 x SO-DIMM DDR3L, Up
to
16GB
2 x SO-DIMM DDR3L, Up
to
16GB 2 GB DDR3 4 GB DDR3, Up to 8 GB 4 GB DDR3, Up to 8 GB 4 GB DDR3
Network
LAN: 10/100
Mbps, WLAN:
802.11 a/g/n, Bluetooth 4.0
LAN: 10/100
Mbps, WLAN:
802.11 a/g/n, Bluetooth 4.0,
4G (optional)
LAN: 10/100
Mbps, WLAN:
802.11 a/g/n, Bluetooth 4.0,
4G (optional)
LAN: 10/100
Mbps, WLAN:
802.11 a/g/n, Bluetooth 4.0
vPro, PXE, AMT (i5-
3610ME required), LAN:
10/100 Mbps, WLAN:
802.11 a/g/n
vPro, PXE, AMT (i5-
3610ME required), LAN:
10/100 Mbps, WLAN:
802.11 a/g/n LAN: 10/100
Mbps
Storage SSD 256 GB, HDD 500 GB SSD 256 GB, HDD 500 GB SSD 256 GB, HDD 500 GB
Internal Storage:
8 GB Nand Flash, SD Card
: Up to 32 GB SSD 256 GB, HDD 500 GB SSD 256 GB, HDD 500 GB Internal Storage:
4 GB, HDD 500
GB
I/O Ports
1 x RJ45
2 x USB2.0
1 x Display Port
1 x Headphone
3.5 mmjack
1 x Microphone
3.5 mmjack
2 x WiFiantenna
connector
1 x Power button
1 x Reset button
1 x RS232
3 x USB3.0
1 x USB2.0
1 x HDMI
1 x Headphone
3.5 mmjack
1 x Microphone
3.5 mmjack
2 x WiFiantenna connector
1 x RS232
3 x USB3.0
1 x USB2.0
1 x HDMI
1 x Headphone
3.5 mmjack
1 x Microphone
3.5 mmjack
2 x WiFiantenna connector
1 x RJ45
2 x USB2.0
1 x USB OTG
1 x Headphone
3.5 mmjack
1 x Microphone
3.5 mmjack
1 x WiFiantenna connector
1 x SD Card Slot
1 x RJ45
2 x USB 3.0 ports
2 x USB 2.0 ports
1 x Headphone
3.5 mmjack
1 x Microphone
3.5 mmjack
2 x WiFiantenna
connector
1 x RJ45
2 x USB 3.0 ports
2 x USB 2.0 ports
1 x Headphone
3.5 mmjack
1 x Microphone
3.5 mmjack
2 x WiFiantenna
connector
1 x RJ45
2 x USB2.0
1 x VGA (out)
1 x Display Port
1 x Power button
1 x Reset button
1 x Audio (line- out, mic-in)
1 x UART
Operating
System Windows10 Windows10 Windows10 Android 4.4
Kitkat Windows10 Windows10 Windows10
Available
Models/Series STM, PDM, PDH, UHM, IFM STM, PDM, PDH, UHM, IFM STM, PDM, PDH, UHM, IFM STM, PDM, PDH, UHM, IFM IF, CD, STM, PDM, PDH,
UHM, IFM IF, CD, STM, PDM, PDH,
UHM, IFM 32" CD
Vestel’s pluggable processors (OPS) are designed to give
extra computational power to our displays.
DS PROJECTS
3
© APPLICATION ENGINEERING
•GENERAL VIEW; OPSSL630,OPSSL650
1.
HDMI
5.
RJ45 10/100/1000 Mbps Ethernet
2.
Microphone / Headphone (3.5mm jack)
6.
RS232
3.
3 x USB 3.0 ports
7.
On/Off Button
4.
USB 2.0 port
8.
2 x WiFi Antenna Connectors
Input/Output Connections
The connections are illustrated as shown below.
TOP VIEW BOTTOM VIEW
DS PROJECTS
4
© APPLICATION ENGINEERING
•GENERAL VIEW; OPSJ1900
Input/Output Connections
The connections are illustrated as shown below.
TOP VIEW BOTTOM VIEW
1.
RJ45 10/100/1000 Mbps Ethernet
5.
Reset Button
2.
2 x USB 2.0 ports
6.
Microphone (3.5mm jack)
3.
Display Port
7.
Headphone (3.5mm jack)
4.
On/Off Button
8.
2 x WiFi Antenna Connectors
DS PROJECTS
5
© APPLICATION ENGINEERING
•GENERAL VIEW; OPSRK150
Input/Output Connections
The connections are illustrated as shown below.
TOP VIEW BOTTOM VIEW
1.
WIFI Antenna Connector
5.
RJ45 10/100 Mbps Ethernet
2.
SD Card Slot
6.
2 x USB 2.0 Ports
3.
Microphone Port 3.5mm jack
7.
USB OTG
4.
Headphone Port 3.5mm jack
DS PROJECTS
6
© APPLICATION ENGINEERING
•CONNECTION SCHEME
Warning
Insert the OPS into the slot with the “This Side Out” warning label facing outside.
Your product has an 80 pin OPS standard connection interface. Interconnection of the product and another board
(i.e. docking board, monitor board or main board…) is provided by JAE TX/24TX25 plug and receptacle connectors.
Left: Plug connector (p/n: TX25-80P)
Right: Receptacle connector (p/n: TX24-80P)
Plug Connector / TX25 Pinout
Receptacle Connector / TX24 Pinout
*Connector series image, reference only.
DS PROJECTS
7
© APPLICATION ENGINEERING
•PIN CONNECTIONS (JAE TX25-80)
PIN
NO
Signal
Description
I/O
1
NC
DisplayPort
OUT
2
NC
DisplayPort
OUT
3
GND
Ground
-
4
NC
DisplayPort
OUT
5
NC
DisplayPort
OUT
6
GND
Ground
-
7
NC
DisplayPort
OUT
8
NC
DisplayPort
OUT
9
GND
Ground
-
10
NC
DisplayPort
OUT
11
NC
DisplayPort
OUT
12
GND
Ground
-
13
NC
DisplayPort
OUT
14
NC
DisplayPort
OUT
15
NC
DisplayPort
IN
16
GND
Ground
-
17
TMDS_CLK-
DVI-D
OUT
18
TMDS_CLK+
DVI-D
OUT
19
GND
Ground
-
20
TMDS0-
DVI-D
OUT
21
TMDS0+
DVI-D
OUT
22
GND
Ground
-
23
TMDS1-
DVI-D
OUT
24
TMDS1+
DVI-D
OUT
25
GND
Ground
-
26
TMDS2-
DVI-D
OUT
27
TMDS2+
DVI-D
OUT
28
GND
Ground
-
29
DVI_DDC_DATA
DVI_D
I/O
30
DVI_DDC_CLK
DVI_D
I/O
31
DVI_HPD
DVI_D
IN
32
GND
Ground
-
33
+12V~+19V
Power
-
34
+12V~+19V
Power
-
35
+12V~+19V
Power
-
36
+12V~+19V
Power
-
37
+12V~+19V
Power
-
38
+12V~+19V
Power
-
39
+12V~+19V
Power
-
40
+12V~+19V
Power
-
41
PWROK
System power OK
OUT
42
WAKE
System wake
OUT
43
RSVD
Reserved pins
-
44
RSVD
Reserved pins
-
45
RSVD
Reserved pins
-
46
RSVD
Reserved pins
-
47
RSVD
Reserved pins
-
48
RSVD
Reserved pins
-
49
RSVD
Reserved pins
-
50
SYS_FAN
System Fan Control
OUT
51
UART_RXD
UART 3.3V
IN
52
UART_TXD
UART 3.3V
OUT
53
GND
Ground
-
54
StdA_SSRX-
USB3.0
IN
55
StdA_SSRX+
USB3.0
IN
56
GND
Ground
-
57
StdA_SSTX-
USB3.0
OUT
58
StdA_SSTX+
USB3.0
OUT
59
GND
Ground
-
60
USB_PN2
USB
I/O
61
USB_PP2
USB
I/O
62
GND
Ground
-
63
USB_PN1
USB
I/O
64
USB_PP1
USB
I/O
65
GND
Ground
-
66
USB_PN0
USB
I/O
67
USB_PP0
USB
I/O
68
GND
Ground
-
69
AZ_LINEOUT_L
Audio-Lch
OUT
70
AZ_LINEOUT_R
Audio-Rch
OUT
71
CEC
Consumer Electronic Control
I/O
72
PB_DET
Pluggable Board Detect
OUT
73
PS_ON
Pluggable Signal ON
IN
74
PWR_STATUS
PowerGood
OUT
(OC)
75
GND
Ground
-
76
GND
Ground
-
77
GND
Ground
-
78
GND
Ground
-
79
GND
Ground
-
80
GND
Ground
-
DS PROJECTS
8
© APPLICATION ENGINEERING
•USING YOUR PRODUCT MORE EFFECTIVELY
Paying attention to the following points with respect to your product will provide a stable performance and also prolong its life.
• Ensuring security of your product
• Daily care of your product
Daily Care & Environmental Factors
Ambient temperature must be between 0°C -40°C while the product is running. Do not directly expose the product to humidity, high
temperature, fire, direct sun light and dust while using it. The vent holes of the product will allow it perform safer without system
overheating. Do not cover these holes or do not prevent air flow with an object. Position the product at least 15 cm away from strong
magnetic field generating electrical devices such as TV, refrigerator or large speakers. Do not suddenly take your product from a cold
environment and suddenly put it in a warm environment. A sudden temperature change of 10°C may cause some of the internal parts to
malfunction. Do not put your product on an uneven surface.
Points to be taken into consideration while clean- ing the product
Your system must be turned off while cleaning the product. Please use a soft and damp piece of cloth for cleaning its surface. Do not use
chemical cleansers to clean the product. Do not directly apply the cleaning material on your product.
Wireless LAN Transmitter Specifications
Frequency Ranges
Max Output
Power
2400 - 2483,5 MHz (CH1-CH13)
< 100 mW
5150 - 5250 MHz (CH36 - CH48)
< 200 mW
5250 - 5350 MHz (CH52 - CH64)
< 200 mW
5470 - 5725 MHz (CH100 - CH140)
< 200 mW
This device is intended for home and office use in all EU countries (and other
countries following the relevant EU directive) without any limitation except for the
countries mentioned by side.
The requirements for any country may change at any time. It’s recommended that
user checks with local authorities for the current status of their national
regulations for both 2.4 GHz and 5 GHz wireless LAN’s.
DS PROJECTS
15
© APPLICATION ENGINEERING
•How to Reset Your Windows 10 PC
If your computer isn't running the way it should, you're getting strange errors or you just want
to return it to its default state, Windows 10 has your answer. The operating system provides a
number of options that let you restore your computer to an earlier state. Here's how to reset
your PC in Windows 10.
Navigate to Settings. You can get there by clicking the gear icon on the Start menu.
1. Navigate to Settings. You can get there by clicking the gear icon on the Start menu.
DS PROJECTS
17
© APPLICATION ENGINEERING
•How to Reset Your Windows 10 PC
Windows presents you with three major
options: Reset this PC, Go back to an
earlier build and Advanced startup. Reset
this PC is the best option for starting fresh.
Advanced startup lets you boot off a
recovery USB drive or disc and "Go to an
earlier build" is made for Windows Insiders
who want to roll back to a previous version
of the OS.
4. Click Get started under Reset this PC.
DS PROJECTS
18
© APPLICATION ENGINEERING
5. Click either "Keep my files" or "Remove
everything," depending on whether you want to
keep your data files intact. Either way, all of
your settings will return to their defaults and
apps will be uninstalled.
6. Select "Just remove my files" or "Remove files
and clean the drive" if you chose to "remove
everything" in the prior step. Cleaning the drive
takes a lot longer but will make sure that, if you
are giving the computer away, the next person will
have a hard time recovering your erased files. If
you are keeping the computer, choose "Just
remove my files."
•How to Reset Your Windows 10 PC
DS PROJECTS
19
© APPLICATION ENGINEERING
7. Click Next if Windows warns you that you
won't be able to roll back to a prior version of
the OS.
•How to Reset Your Windows 10 PC
8. Click Reset when prompted.
Windows will then restart and take several minutes to reset itself.
9. Click Continue when prompted.
DS PROJECTS
20
© APPLICATION ENGINEERING
•WINDOWS 10 REINSTALLATION VIA USB FLASH DRIVE
Requirements;
•USB Flash Drive which has minimum 16GB capacity,
•AIO/OPS device,
Steps;
Start Rufus software and install “windows image.iso” file to USB flash drive as shown.
(Picture 1) (windows image.iso file can be changed according to type of OPS
model.)Rufus application and windows image files shared via Customer Support
•Usb flash drive should be chosen under Device option.
•File system should be chosen as “NTFS”
•“windows image.iso” should be chosen as ISO Image. (Picture 2)
1. Click on start button to start the process. (Picture 3)
2. You will see Done after the process is finished. (Picture 4)
3. Power off the device with operating system problem,
4. Plug USB Drive and power on,
5. After power on press F7 and select USB drive with UEFI option as shown . (Picture 5)
6. Installation progress will start. Just wait until the process is finished.
7. Device will power off after installation finished, remove USB drive and power on again.
8. Device will start with the new operating system.
This manual suits for next models
6
Table of contents
Other VESTEL Desktop manuals
