VEVOR QQZJ-95 Series User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
SWING BRACKET
SERIES:QQZJ-95-X
Tip: X is 1/2/3
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
QQZJ-95-1 QQZJ-95-2
QQZJ-95-3
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
SWING BRACKET

- 2 -
WARNING:
1. Do not allow children to climb on the unit. 2. Keep children and pets
away during assembly.
ASSEMBLY PRECAUTIONS
1. Please assemble the product in strict accordance with the instructions.
Incorrect assembly could be hazardous.
2. Please wear safety goggles and work gloves properly during assembly.
3. Do not try to assemble the product when feeling tired or when under the
influence of alcohol, drugs or medication.
4. Load bearing capacity and other product parameters are applied to the
properly and completely assembled product only.
5. Separate and count all parts and hardware.
6. Prepare the following tool: Philips Head Screwdriver.
7. If using power tools, please be careful to slow down and stop when
needed.
8. Two people are required for assembly.
9. Follow the intended uses only.
Save the instruction.
Product Paremeters
Model
QQZJ-95-1
QQZJ-95-2
QQZJ-95-3
Top Beam Inner Size
3.7x5.7 inch
3.7x5.7 inch
3.7x5.7 inch
Support Legs Inner
Size
3.7x3.7 inch
3.7x3.7 inch
3.7x3.7 inch
Number of Items
1 PCS
2 PCS
3 PCS
Colour
Green
Green
Green
Screws
8 PCS
16 PCS
24 PCS
Flat Cushion
16 PCS
32 PCS
48 PCS

- 3 -
Nut M8
8 PCS
16 PCS
24 PCS
Swing Set Bracket Instruction Manaual
Step 1
Slide the bracket until
it's flush with the
wood.
Step 2
First drill holes, Than
use lag bolts and
washes fasten
brackets.
Step 3
Repeat on other sides.
Step 4
Slide the wood into the
bracket.
Step 5
Slide both side in than
drill them with lag bolts
and washers.
Step 6
Repeat step 1-5 on
other side.

- 4 -
REP
UK
Pooledas Group Ltd
Unit 5 Albert Edward House, The
Pavilions Preston, United Kingdom
REP
EC
SHUNSHUN GmbH
Römeräcker 9 Z2021, 76351
Linkenheim-Hochstetten, Germany
Address ：Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi
Shanghai
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD
NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim
Place, Rancho Cucamonga, CA 91730

Technical Support and E-Warranty Certificate
www.vevor.com/support
Made In China

Assistance technique et certificat de garantie électronique www.vevor.com/support
SUPPORT PIVOTANT
SÉRIE : QQZJ-95- X
Astuce : X vaut 1/2/3
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
QQZJ-95-1 QQZJ - 95-2
QQZJ-95-3
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
SWING BRACKET

- 2 -
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
AVERTISSEMENT:
1. Ne laissez pas les enfants grimper sur l'appareil. 2. Éloignez les enfants
et les animaux domestiques pendant l'assemblage.
PRÉCAUTIONS DE MONTAGE
1. Veuillez assembler le produit en stricte conformité avec les instructions.
Un assemblage incorrect pourrait être dangereux.
2. Veuillez porter correctement des lunettes de sécurité et des gants de
travail pendant l'assemblage.
3. N'essayez pas d'assembler le produit lorsque vous vous sentez fatigué
ou sous l'influence de l'alcool, de drogues ou de médicaments.
4. La capacité de charge et les autres paramètres du produit sont
appliqués uniquement au produit correctement et complètement assemblé.
5. Séparez et comptez toutes les pièces et le matériel.
6. Préparez l'outil suivant : Tournevis cruciforme.
7. Si vous utilisez des outils électriques, veillez à ralentir et à vous arrêter
si nécessaire.
8. Deux personnes sont nécessaires pour le montage.
9. Suivez uniquement les utilisations prévues.
Enregistrez les instructions.
Paramètres du produit
Modèle
QQZJ-95-1
QQZJ-95-2
QQZJ-95-3
Taille intérieure de la
poutre supérieure
3,7x5,7
pouces
3,7x5,7
pouces
3,7x5,7
pouces
Jambes de soutien
3,7x3,7
3,7x3,7
3,7x3,7

- 3 -
Taille intérieure
pouces
pouces
pouces
Nombre d'objets
1 PCS
2 pièces
3 PIÈCES
Couleur
Vert
Vert
Vert
Des vis
8 pièces
16 PIÈCES
24 pièces
Coussin plat
16 PIÈCES
32 pièces
48 pièces
Écrou M8
8 pièces
16 PIÈCES
24 pièces
Manuel d'instructions du support de balançoire
Étape 1
Faites glisser le
support jusqu'à ce qu'il
affleure le bois.
Étape 2
Percez d’abord des
trous, puis utilisez des
tire-fonds et des
supports de fixation.
Étape 3
Répétez sur les autres
côtés.

- 4 -
REP
UK
Pooledas Group Ltd
Unit 5 Albert Edward House, The
Pavilions Preston, United Kingdom
REP
EC
SHUNSHUN GmbH
Römeräcker 9 Z2021, 76351
Linkenheim-Hochstetten, Germany
Étape 4
Faites glisser le bois
dans le support.
Étape 5
Faites glisser les deux
côtés puis percez-les
avec des tire-fonds et
des rondelles.
Étape 6
Répétez les étapes 1 à
5 de l’autre côté.
Adresse : Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi
Shanghai
Importé en Australie : SIHAO PTY LTD . 1 ROKEVA STREETASTWOOD
NSW 2122 Australie
Importé aux États-Unis : Sanven Technology Ltd. Suite 250, 9166
Anaheim Place, Rancho Cucamonga, CA 91730

- 5 -

Assistance technique et certificat de garantie électronique
www.vevor.com/support
Fabriqué en Chine

Technischer Support und E-Garantiezertifikat www.vevor.com/support
SCHWENKHALTERUNG
SERIE: QQZJ-95- X
Tipp: X ist 1/2/3
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
QQZJ-95- 1 QQZJ-95- 2
QQZJ-95-3
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
SWING BRACKET