VIBESTA B.V RAYZR 7 User manual

Rayzr 7 4-leaf barndoor Carrying case
Power cable
with power plug
1SETTING UP
2FUNCTIONS
7” LED Fresnel
QUICK START GUIDE - June 2016 V.01
Premium Pack
Standard Pack

RAYZR7.COM
1SETTING UP
Power
>AC: For AC power connect the power cable
to the <AC Connector> (powerCON TRUE1) and set the on / off switch to
1 to power the fixture on.
>Battery / DC: To power the fixture by battery connect
the battery power cable to the <DC Connector> (speakON)
and set the on / off switch to 2 to power the fixture on.
Power Switch: AC / OFF / DC
AC Connector DC Connector
180 - 264 V, 50 - 60 Hz
90 - 132 V, 50 - 60 Hz
90 - 264 V, 50 - 60 Hz
90 - 264 V, 50 - 60 Hz
90 - 264 V, 50 - 60 Hz
300 Daylight (EU)
300 Daylight (US)
300B Bi-color
200 Daylight
200BM Bi-color
300 Daylight
300B Bi-color
24 -36 V
24 -36 V
200 Daylight 24 -36 V
200BM Bi-color 12 -24 V
>When mounting the fixture
in a hanging position, secure
the light by adding an
additional safety cable that
connects the Yoke with
a reliable and strong
structure.
Securing
16mm/28mm Combo Pin
Holes for Safety Cable
Mounting
>The fixture must be
fastened at the Yoke by
attaching it to a spigot of
a matching stand or
other holding device
and tightening the
spigot mount screw.

RAYZR7.COM
Focusing
>
>
Rotate the <Focus Knob> to
adjust the light beam angle.
The <Focus Indicator> shows
the set beam angle.
DMX
>
>
Connect the Rayzr 7 through the RJ45 DMX connector with a DMX network.
Press <MODE Button> 2 seconds to change between different setting menu items.
>Rotate the <Adjustment Knob> to change settings in the appropriate menu item.
DMX channel (CH)
*Frequency band (FRE)
*Matching code (PASS)
1 - 512
0 - 125
0 - 9999
2FUNCTIONS
Focus Knob
RJ45 DMX
Connector
Focus
Indicator
Adjusting Intensity and Color Temperature
(Color temperature only for Bi-color models)
>
>
>
To toggle between brightness (”%” symbol visible in the LCD display)
and *color temperature adjustment (”K” symbol visible in the LCD display),
press the <Adjustment Knob>.
Rotate the <Adjustment Knob> to set the brightness or *color temperature.
The Rayzr 7 has two adjustment speeds. To choose between fine and quick
adjustment, press the <SET Button>. When set to quick adjustment,
the “%” or “K” symbol blinks.
Adjustment Knob
MODE Button
SET Button
(Adjustment Speeds)
Fan Mode
>
>
Press the <MODE Button> to enter
and view the fan mode.
Rotate the <Adjustment Knob> to
change fan mode between:
High output, Low noise.
(*Only for WiFi module)

RAYZR7.COM
8-leaf barndoor Softbox
RJ-45
Male Female Male Female
Copyright © 2016 VIBESTA B.V.
VIBESTA B.V. · Professor Rommelaan 2, 5707KS Helmond, The Netherlands · Tel [phone]
Accessories (Optional)
Tips: DMX Connector Pinouts
Pin 1: Ground
Pin 2: Data 1-
Pin 3: Data 1+
Pin 7,8: Ground
Pin 1: Data 1+
Pin 2: Data 1-
Pin 1: Ground
Pin 2: Data 1-
Pin 3: Data 1+
1 2 3 4 5 6 7 8
11
2
3
4
5
2
3
21
3
5
4
3
2
1
4-leaf barndoor
XLR 3-Pin XLR 5-Pin