Vicon Valerus Shadow Elite User manual

Quick Start Guide: Shadow Elite Client Workstation
1U Form Factor
This sheet covers the installation of the Valerus Elite Client Workstation 1U rack-mount form factor. This
system should only be installed by a qualified technician using common hand tools and approved materials in
accordance with the National Electrical Code ANSI/NFPA 70, state and local wiring codes.
Unpack the unit and place it in the mounting location. Hard drives are preinstalled from the factory.
•Keyboard and mouse are included with the unit. Rail kit provided.
•Connect monitor(s) using the mini-DP ports (refer to figure above). Use the mini-DP to HDMI adapter
provided in the box.
•Connect unit to the network using the WAN (Internet) port. Refer to figure above. The port is setup to
procure an IP address automatically using DHCP.
•Attach the power cord and power the unit on. It is recommended to use an Uninterrupted Power Supply
(UPS) to prevent data loss/corruption and/or drive failures due to sudden power loss.
VICON INDUSTRIES INC. TEL: [phone] FAX: [phone] TOLL FREE: 800-645-9116
24-Hour Technical Support: 800-34-VICON (800-348-4266) UK: [phone] WEB: vicon-security.com
Vicon part number
8009-8323-80-00
Product specifications subject to change without notice. Copyright ©2021. All rights reserved.
Vicon and its logo are registered trademarks and Valerus and its logo are trademarks of Vicon Industries Inc.
Front Panel Connections & Controls Rear Panel Connections & Controls
1. Log into Windows using default credentials (login: VII; password: 1234).
Note: For increased security, it is highly recommended to change the credentials upon first login both for
Windows and Valerus application.
3. The Valerus Edge Configurator screen will display. Add the
IP address of the Valerus Application Server to be viewed
and click the Add button. A message will display that a
restart of the PC is required for changes to take effect.
Click OK (just clicking OK will not restart the PC). More
addresses can be added as needed. After all IP addresses
have been added, restart the PC.
4. Click the create shortcut button (noted in red box) to place a
shortcut icon on the desktop. Use this icon to launch Valerus
in Edge. Valerus can also be accessed directly from the Edge
browser by entering its IP address in the Edge browser;
Valerus will launch.
2. A link to an Edge Installation Tool has been provided on the
desktop. Click on the link to launch the tool.
5. Sign into the application using default credentials. (login:
admin; password: 1234).
Note: For increased security, it is highly recommended to
change the credentials upon first login both for Windows
and Valerus application.
Launching Valerus
Unpacking and Installation

Valerus Manual Valerus Performance Guide
Valerus documentation has been provided on the system. A link is on the desktop. For the most
updated documentation on Valerus NVRs, visit Vicon’s website at:
www.viconsecurity.com/products/valerus-vms/.
Quick Start Guide: Shadow Elite Client Viewing Station
1U Form Factor
VICON INDUSTRIES INC. TEL: [phone] FAX: [phone] TOLL FREE: 800-645-9116
24-Hour Technical Support: 800-34-VICON (800-348-4266) UK: [phone] WEB: vicon-security.com