Vicoustic VicBooth Ultra User manual

1
Installation Manual
Ventilation
Unit

2
Included
Ventilation unit | 1 uni.
Not included
6mm Phillips Screwdriver
Material Needed
Fixing screws | 6 uni.
P
Insulation Seal | 1 uni. USB extension cable (3m) | 1 uni.
Remote control electrical outlet | 1 uni.USB power adapter | 1 uni.

3
1Start by placing the Insulation seal on the ceiling of the VicBooth Ultra.
2Place the Ventilation unit aligned with the Insulation seal and the xing holes.

4
3Fix the Ventilation unit using the included screws (P) and a 6mm Phillips Screwdriver.
Step’s Material
P
6mm Phillips Screwdriver

5
Step’s Material
1
2
3
Step’s Material
4Connect the included USB extension.
5Connect the Remote Control Electrical Outlet and the USB power adapter to a wall socket.
You can switch the fan ON and OFF from inside the cabin using the remote control.

6
!We recommend that the speed controller should be set to the maximum speed (H).

7
6Multiple ventilation units can be connected in series using the included USB connection.
We recommend connecting up to 3 units using the same USB power adapter.

8
© Vicoustic, 2020 | V2
No parts of this document might be copied and/or
published without written consent of Vicoustic.
Main Oce, R&D & Logistics
Avenida do Pólo 3, Nº 159, Carvalhosa
4590-137 Paços de Ferreira, Portugal
Oce
Rua Quinta do Bom Retiro Nº 16, Armazém 9
2820-690 Charneca da Caparica, Portugal
T ([phone]
Info and Sales
E [e-mail]
www.vicoustic.com