Vicoustic VicFix Base User manual

EN
VicFix Base
Installation Manual

EN
Not Included
MATERIAL NEEDED
Included
VicFix J Prole x4
Silicone Drop x4
VicFix Base x2 Gauge x1
Wall Plugs and Screws x8
Level Drill Measuring Tape
Glue
Vicoustic Legacy Product
VicFix J Prole 2m | 78.7" x20
Ceilling Gauge x2
* This product works with several products from the Legacy line.
VicFix Corner 4 +4

EN
Wall Installation
This product can also be installed on the ceiling and wall with the VicFix J Prole 2m (sold
separately). For corner installation, use the VicFix Corner (sold separately).
Ceiling Installation
!Please note: For ceiling installation do
not use the VicFix J Prole sections
supplied with the product. Use the
VicFix J Prole 2m, sold separately. It is
recommend to leave some centimeters
beyond the last panel to avoid it to loose
contact with the VicFix J prole. In
countries where earthquakes are likely
to happen, it should be applied a blocking
element such as a L prole to avoid the
last panel to slide off the VicFix J prole.
Vicoustic will not take responsibility
for any mistakes/ limitations occurring
during installations or any damages
resulting from falling panels.
Corner Installation

EN
1
1.1
1.2
Apply the glue to the inner surface of the VicFix Base, center the panel you want
to glue and press them rmly against each other. You can use pieces of adhesive
tape to press the two elements together until the glue is completely dry (about 3
hours).

EN
2A 2B
2C 2D
Ways of using the gauge

EN
3.1 3.2
3.3 3.4
3Step by step installation.
If you want to install just one row of panels, do not install the bottom prole

EN
2
1
4
1
2
4.1 4.2

© Vicoustic, 2021 | V6
No parts of this document might be copied and/or published without written consent of Vicoustic.
Main Oce, R&D & Logistics
Avenida do Pólo 3, Nº 159, Carvalhosa
4590-137 Paços de Ferreira, Portugal
Oce
Rua Quinta do Bom Retiro Nº 16, Armazém 9
2820-690 Charneca da Caparica, Portugal
T ([phone]
Info and Sales
E [e-mail]
www.vicoustic.com