Vicovation VICO-MF1 Installation and operation manual

軟體升級手冊
UpgradeGuide
VICO-MF1
v1.3

v1.3 Software Upgrade detail
1
v1.3 Improvement:
1. System stability improved.
2. Screen display bugs fixed.
3. Russian language added.
Special Notice
Please be aware the device might be broken if power down during upgrading.
Please be careful about the charger. The original charger is highly
recommended for upgrade, better in car environment with power on situation.
If you upgrade at home, please aware of the power adaptor can provide
sufficient 5V/1A output.
Please avoid using mobile phone USB charger which offer less than 5V/1A
output.
Insufficient power supply might lead to upgrade failure.

2
Vico-MF1 Upgrade Steps
STEP1:
Please make sure the file you downloaded is v1.3 with instruction manual.
File name: vico_mf1.bin.
The file size is about 27MB.
STEP2:
Copy vico_mf1.bin into your Micro SD card.
(Special Notice: Do Not put into any folder, just the root of your
Micro SD card)
Under Mac OS & Windows 7:Under Mac OS & Windows 10:
STEP3:
Insert the Micro SD card into Vico-MF1, power on by USB cigar car charger in
car.
vico_mf1.bin
vico_mf2.bin
vico_mf1.bin

3
Vico-MF1 Upgrade Steps
STEP4:
Then choose “Yes” and press “OK”
STEP5:
Please wait for 10 seconds.
DO NOT power off MF1 while upgrading.
It takes a few seconds to upgrade the device after the indication light on the
upper left corner lights up. Please no not disconnect the device from the power
source during the upgrade. After the upgrade, the indication light will go off.
Please manually turn on the device after. successfully.

5
Vico-MF1 Upgrade Steps
Please reset to factory default after upgrading.
The user might have to reset the previous configuration again.
Enter MENU → Make sure Software version is v1.3 and format Micro SD card
(Before format, please backup important file)
Please feel free to contact us when
encountered any problem, and we welcome
your common or advice.
Email: [email protected]
STEP6: