Victory FIA-1D-S7 User manual

Roll-in Freezers
Cabinet:
Each Victory cabinet is internally supported,
braced and assembled into a single rigid
unit. The cabinet front and doors are
constructed of heavy gauge polished
stainless steel to maintain an attractive
appearance after years of heavy use.
Foamed-in-place polyurethane insulation
throughout the cabinet and doors ensures
the ultimate in energy efficiency.
Doors:
The self-closing doors are securely mounted
on rugged cam-lift hinges, which have a
lifetime guarantee. Each door has a heavy-
duty cylinder lock and self-adjusting
magnetic gasket to prevent the cold air from
escaping. Humidity control wires located
around the door jamb prevent condensation
from forming on the cabinet front and are
concealed by a high impact, non-conductive
thermal breaker strip. The interior door liner
is constructed of durable ABS material,
which resists denting and scratching and is
easy to clean. Each safety grip handle is
guaranteed for life. Removable ramps are
provided on the bottom of each door
opening.
Refrigeration System:
All components of the self-contained
refrigeration system are mounted on top of
the cabinet. The air circulating fans and the
forced convection-cooling coil are contained
in an insulated housing separate from the
product zone allowing for maximum food
storage capacity. All condensate water is
disposed of automatically by the energy
efficient non-electric condensate evaporator,
no plumbing is required.
FIS and FISA Models
• Digital Thermometer/Battery Back-up
FIA Models
• Dial Thermometer
Standard Features (all models)
• Energy Saver Switch
• Stainless Steel Case Front and Door(s)
• Lifetime Cam Lift Hinges
• Lifetime Safety Grip Handle(s)
• Self-Closing Doors with Safety Stops
• Adjustable Wiper Gasket(s)
• Removable Ramps(s)
• Energy Saving Thermal Breaker Strips
• Door Opening Accepts Carts up to 27”w x
29”d x 64”h
• Heavy-Duty Cylinder Locks
• One Piece Self-Adjusting Magnetic Door
Gaskets
• High Impact ABS Interior Door Liner
• Plasticized Fin Coil
• Environmentally Friendly R-404A Refrigerant
• Non-Electric Condensate Evaporator
• Automatic Defrost
• Stainless Steel Floor
• Cord and Plug Attached on 115V Models 12
Amps or Less
Optional Features and Accessories
• Dial or Digital Thermometer
• Hinged Glass Doors with Cylinder Locks
• Change Door Swing
• Shelf Pilaster Strips
• Adjustable Stainless Steel Wire Shelves
• Stainless Steel Angle Pan Slides
• Zinc Plated Wire Pan Slides
• Stainless Steel Case Back
• Remote and Roll-Thru Models
Note: All 2 & 3 section Roll-Thru models only
have stainless steel interiors
FIS MODELS —
Stainless steel
exterior and
interior.
FIS-1D-S7
FIS-2D-S7
FIS-3D-S7
FISA-1D-S7
FISA-2D-S7
FISA-3D-S7
FIA-1D-S7
FIA-2D-S7
FISA MODELS —
Stainless steel
exterior.
Aluminum interior.
FIA MODELS —
Stainless steel fronts
and doors. Aluminum
sides and interior.
FISA-22D-SS7
Half DDoor, RRoll-TThru aand RRemote MModels AAvailable
Victory Refrigeration, Inc. I 110 Woodcrest Road I Cherry Hill, NJ 08003 USA I Phone: [phone] I Fax: [phone] I E-mail: [email protected]
Victory Refrigeration specification sheets
are available online at www.victory-refrig.com.
Approvals:
Project:
Location:
Item #:
Quantity:

Victory participates in the KCL CADalog, the most current source of CAD symbols for foodservice designers worldwide. Symbols include
standard equipment in plan, side, front and 3-D views, layered for FEDA/FCSI recommended guidelines.
Continuous product development may necessitate specification changes and design without notice.
Victory RRefrigeration, IInc. Roll-iinFFreezers
CHARACTERISTICS ONE SECTION TWO SECTION THREE SECTION
Roll-In Roll-Thru Roll-In Roll-Thru Roll-In Roll-Thru
Width, Overall 36 1/236 1/268 7/868 7/8101 1/4101 1/4
Depth, Overall (incl. handles) 35 7/839 3/835 7/839 3/835 7/839 3/8
Height, Overall 84 84 84 84 87 1/287 1/2
Depth, Door(s) Open 90º 65 1/498 1/865 1/498 1/865 1/498 1/8
Depth Case Over Ramp 35 1/238 1/235 1/238 1/235 1/238 1/2
Clear Door Width 27 3/427 3/427 3/427 3/427 3/427 3/4
Clear Full Door Height 65 1/465 1/465 1/465 1/465 1/465 1/4
Capacity Net (cubic feet) 33.6 36.2 67.2 72.4 100.9 108.6
No. of Full Doors 1 2 2 4 3 6
Cabinet Voltage 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
Feed Wires 3 3 3 3 3 3
Condensing Unit Voltage 208-230/60/1 208-230/60/1 208-230/60/1 208-230/60/1 230/60/1 230/60/1
Condensing Unit Size (HP) 3/411 22.5 2.5
Total Amperes 10.9 13.3 13.9 18.2 22.7 24
Crated dim. & wts. Ht. Width Depth Cu.Ft. Lbs
One Section 87 413/4443/494.1 480
Two Section 87 745/8443/4168.1 840
Three Section 87 107 443/4241.1 1210
Approximate Roll-Thru weights, add 15%
FOR REMOTE MODELS– Substitute an “R” for the “S” in suffix. For
example: Model FIS-1D-S7 (self-contained) would be FIS-1D-R7
remote cabinet. Air circulating fans, expansion valve and plasticized
coil are provided. Condensing units not supplied. The following units
are recommended with
1/2
” O.D. Suction line,
1/4
” O.D. Liquid line.
Dimensional tolerance ± 1/4” Metric dimensions (MM)
REMOTE REFRIGERATION
Cond. Unit BTUH Cabinet Amps*
One Section
1/3
H.P. 2540 115/60/1 4.9
Two Section
1 H.P. 4400 115/60/1 7.8
Three Section
2.5 H.P. 5800 115/60/1 8.5
*(In Defrost) For Remote Roll-Thru–Consult factory
Copyright November 2007
Printed in U.S.A. 010425
PART OF AGA FOODSERVICE GROUP
39.38
(1000)
31.25
(793)
35.88
(911)
36.50
(927)
84.00
(2133)
27.75
(705)
65.25
(1657)
.88
(22)
ELEC.
CONN.
ELEC.
CONN.
65.25
(1657)
.88
(22)
27.75
(705)
27.75
(705)
84.00
(2133)
68.88
(1749)
39.38
(1000)
35.88
(911)
63.62
(1616)
ELEC.
CONN.
ELEC.
CONN.
32.38
(822)
14.12
(358)
34.88
(873)
35.50 (902)
TO RAMP
27.75
(705)
27.75
(705)
27.75
(705)
.88
(22)
65.25
(1657)
101.25
(2571)
84.00
(2133)
39.38
(1000)
96.00
(2438)
35.88
(911)
ELEC.
CONN.
ELEC.
CONN.
ROLL-THRU MODELS
ROLL-IN MODELS
NOTE: If cabinet is located
directly against wall and/or
under low ceiling, a mini-
mum clearance of 2” is
required.
We reserve the right to
change specifications and
product design without
notice. Such revisions do
not entitle the buyer to
corresponding changes,
improvements, additions
or replacements for
previously purchased
equipment.